Yarisworld Archive

Nitto Mid-Pipe Check Engine Light fix

78 posts · 25,153 views · page 2 of 2

Replies continued

Malaya1221Torrance, Ca · Oct 31, 2008#51
kuro, forget garm! u might want to ask rockland(our yaris in-house expert) about your CEL turning on he will definitely know the answer to that!😆
cali yarisCanoga Park, CA · Oct 31, 2008#52
kuro, forget garm!
😢 😢 😢 😢 😢 😢

Malaya !!!
Malaya1221Torrance, Ca · Oct 31, 2008#53
apologize for the offtopic:
cali_yaris, i don't think you know what you r doing, from now on i have rockland to solve my yaris problems!😲😁

hey kuro, did you install the oem bracket to the dc header?
Malaya1221Torrance, Ca · Oct 31, 2008#54
^ keep us updated!
cali yarisCanoga Park, CA · Nov 1, 2008#55
OOH BABY!!

(made my night)
LtNoogieWest Hills, CA · Nov 1, 2008#56
Originally Posted by kurokoma-kun ↑
well... i don't remember which post said my ECU was not spying on me... but i think it is! 😲 cuz i got another CEL yesterday, LOL!
How are you clearing your CELs? I did not see a ScanGauge or equivalent listed in your YarisGarage.
YarisSedanCalifornia - Bay Area · Nov 1, 2008#57
Why are you guys removing your cats anyways. 1 you remove all the backpressure which you need. Sure you will get more power but you are seriousely going to impact your fuel economy which is why most of us bought this car in the first place? Second for the slight power you are going to achive which could be only 5hp at the most as opposed to doing a midpipe from the cat back. You are going to cause an extreme amount of polution. As well as mess up egr function. Not to mention how loud it is going to be. So now if you dont like this sound you will have to choose to have a restrictive muffler to muffle the sound which you could just have a nice open muffler with a cat since a cat muffles sound more than your muffler does.

Also I know in california check engine light is automatic smog failure. Not to mention it would automatically fail anyways since you have no cat.

Unless someone can prove me wrong and have thier vehicle smoged without any cats on it would be interesting to see how much emissions our little engines produce. We do have 2 cats though and its not a zero emission vehicle even with those 2 cats. HC is going to be low probally but it probally has a problem with nox
eTiMaGoBangkok, Thailand · Nov 1, 2008#58
Originally Posted by YarisSedan ↑
Why are you guys removing your cats anyways. 1 you remove all the backpressure which you need. Sure you will get more power but you are seriousely going to impact your fuel economy which is why most of us bought this car in the first place? Second for the slight power you are going to achive which could be only 5hp at the most as opposed to doing a midpipe from the cat back. You are going to cause an extreme amount of polution. As well as mess up egr function. Not to mention how loud it is going to be. So now if you dont like this sound you will have to choose to have a restrictive muffler to muffle the sound which you could just have a nice open muffler with a cat since a cat muffles sound more than your muffler does.

Also I know in california check engine light is automatic smog failure. Not to mention it would automatically fail anyways since you have no cat.

Unless someone can prove me wrong and have thier vehicle smoged without any cats on it would be interesting to see how much emissions our little engines produce. We do have 2 cats though and its not a zero emission vehicle even with those 2 cats. HC is going to be low probally but it probally has a problem with nox
Some very valid questions there, here's my point of view.

1) Those who bought this car solely for the fuel efficiency will never want to get one of these anyway 😁 But there are some of us who like to balance the efficiency with some added fun.

2) Pollution, yes, this is a weak point of this product, as there are no cats it does dump raw exhaust. On the other hand, with "only" a 1.5L engine it produces just a fraction of the noxious stuff that you'd get from a catless V8, for example.

3) Noise? Ask anyone who has installed one, it actually really softens the exhaust note, what with 3 resonators... Totally different from a plain straight pipe.

4) OK, here there are no such things as smog checks. But for those in the US, it's relatively easy to swap back the original midpipe for the inspection.

So, as with any aftermarket part for a car, it's the owner's choice. As of the time of writing, this midpipe is the only "bolt-on" choice available, though it would certainly be nice to see some other company come up with a better alternative 🙂
Klink10910 · Nov 1, 2008#59
QUOTE: As of the time of writing, this midpipe is the only "bolt-on" choice available, though it would certainly be nice to see some other company come up with a better alternative

Agreed
largeorangefontSo Cal, OC · Nov 1, 2008#60
Originally Posted by YarisSedan ↑
Why are you guys removing your cats anyways. 1 you remove all the backpressure which you need. Sure you will get more power but you are seriousely going to impact your fuel economy which is why most of us bought this car in the first place? Second for the slight power you are going to achive which could be only 5hp at the most as opposed to doing a midpipe from the cat back. You are going to cause an extreme amount of polution. As well as mess up egr function. Not to mention how loud it is going to be. So now if you dont like this sound you will have to choose to have a restrictive muffler to muffle the sound which you could just have a nice open muffler with a cat since a cat muffles sound more than your muffler does.

Also I know in california check engine light is automatic smog failure. Not to mention it would automatically fail anyways since you have no cat.

Unless someone can prove me wrong and have thier vehicle smoged without any cats on it would be interesting to see how much emissions our little engines produce. We do have 2 cats though and its not a zero emission vehicle even with those 2 cats. HC is going to be low probally but it probally has a problem with nox
Removing the cats does not remove all the backpressure, The car will make a couple HP more. Removing them will not change the fuel economy, and it will not mess up EGR either. The car will smell a bit, and may be slightly louder when catless.

It will not pass a sniffer test in CA, but cars do not need to be smogged for 6 years after buying a new car. Passing is as simple a swapping the midpipe to the stock unit for the smog check.

It has been proven that using a high flow cat will give you about the same HP as going catless. It may pass smog that way if the cat is placed in the correct spot, and the car won't smell. This would mean constructing a custom midpipe.
03Z33SoCal · Nov 1, 2008#61
Originally Posted by YarisSedan ↑
Why are you guys removing your cats anyways. 1 you remove all the backpressure which you need. Sure you will get more power but you are seriousely going to impact your fuel economy which is why most of us bought this car in the first place? Second for the slight power you are going to achive which could be only 5hp at the most as opposed to doing a midpipe from the cat back. You are going to cause an extreme amount of polution. As well as mess up egr function. Not to mention how loud it is going to be. So now if you dont like this sound you will have to choose to have a restrictive muffler to muffle the sound which you could just have a nice open muffler with a cat since a cat muffles sound more than your muffler does.

Also I know in california check engine light is automatic smog failure. Not to mention it would automatically fail anyways since you have no cat.

Unless someone can prove me wrong and have thier vehicle smoged without any cats on it would be interesting to see how much emissions our little engines produce. We do have 2 cats though and its not a zero emission vehicle even with those 2 cats. HC is going to be low probally but it probally has a problem with nox
Just wanted to add my "$.02"...

1. My idle is smoother with the Nitto mid-pipe (less RPM hunting than stock)

2. My MPG is same or better than before the mid-pipe (consistent 37-42 MPG without any special tricks and A/C on 80% of the time)

3. Sound is 1,000,000 times better than stock IMHO. In fact I'm not running any muffler at all, just straight piping from the mid-pipe back to dual tips.

4. It takes a few days of driving for my CEL to return so I could always clear it and then get the car smogged before it returned

5. Our car is a ULEVII and not a PZEV, so I am confident it may actually pass smog without the cats in place, my 2003 350Z which was also a ULEVII passed without any cats in place just less than 1 year ago.

Keep in mind that I was one of the first to purchase this mid-pipe and did not know at the time that the "cats" are dummies, if I had known that this is removing the cats I may have not purchased. Now that I've had it on the car for a while, it's hard to imagine going back to stock, the sound and feel are just great!


Originally Posted by kurokoma-kun ↑
oh, i'm not clearing them, just unhooking the negative battery terminal and resetting the ecu.

if i had a scangauge would the cel code tell me if its a leak at the collector? thats the other thing i suspect besides the O2 sensor, i was afraid of overtightening the spring bolts
By checking the DTC code, which can be done at most auto parts such as Autozone for free, you would be able to tell if the code is for "cat-inefficiency" or otherwise. That may be able to help you trouble shoot. In all honesty I believe that is most likely why you have the CEL as it's very unlikely that you'd have a leak that you couldn't either hear (vacuum hissing sound) or feel (by idling the car and inspecting from below).


Oh, and BTW, ROCKLAND is an annoying idiot! Why hasn't he been banned yet?
largeorangefontSo Cal, OC · Nov 1, 2008#62
Originally Posted by 03Z33 ↑
By checking the DTC code, which can be done at most auto parts such as Autozone for free, you would be able to tell if the code is for "cat-inefficiency" or otherwise. That may be able to help you trouble shoot. In all honesty I believe that is most likely why you have the CEL as it's very unlikely that you'd have a leak that you couldn't either hear (vacuum hissing sound) or feel (by idling the car and inspecting from below).


Oh, and BTW, ROCKLAND is an annoying idiot! Why hasn't he been banned yet?
FYI - Autozone does not clear codes for free anymore. They want you to buy a OBD scanner.

Are you running any kind of CEL fix on your midpipe?
03Z33SoCal · Nov 1, 2008#63
I was not aware that Autozone don't help out anymore... Hopefully she can find another local shop to help out.

I've been too busy and lazy to stop back at the muffler shop to add the 90 deg style de-fouler, I've had the parts in my glove box for months. Right now I just have a single slightly longer than stock O2 bung since we didn't know how far it needed to be spaced out when I first installed this.
Klink10910 · Nov 1, 2008#64
My elbow is enroute now all I need is a pipe. Gonna do all this and header I hope when the Holdener manifold gets here. Interested in how yours will turn out with that elbow added.
cali yarisCanoga Park, CA · Nov 1, 2008#65
I will be, they are already ordered.

Oh, and BTW, ROCKLAND is an annoying idiot! Why hasn't he been banned yet?
Amen.
ROCKLAND TOYOTAROCKLAND COUNTY NY · Nov 1, 2008#66
[QUOTE=cali yaris;161956



Amen.[/QUOTE]
thanks garm, it'll be remembered............
JerkrattThread starterFair Lawn, NJ · Nov 1, 2008#67
come ons top the bitchering! dammit anyway im going to try to install the non foulers i have...
at3GGVA Beach · Nov 1, 2008#68
Largeorange/cali Thats what i was thinking. I stopped at a shop i prefer around here and asked and the guy told me probably around 400 for a dual custom setup. I think he was figuring in mufflers but Ive got the megan on now and if i had them do the set up i would get another megan for the back i think. So maybe like $300 for a dual setup? I think i could live with that. Does anyone here have a dual setup? Not dual tip muffler i mean single tip on each side of the back of the car? If so I may reconsider or just go with the nitto.

*edit* although i suppose i dont want to have that extra weight for no extra power. I guess I'll just stick with a custom single or the nitto. It would look cool though.
at3GGVA Beach · Nov 2, 2008#69
no opinions?
Malaya1221Torrance, Ca · Nov 2, 2008#70
flowmaster or magnaflow (i think) made that kind of exhaust for 1 of the LB member here, i forget who it was. don't know if it went on production though!
at3GGVA Beach · Nov 2, 2008#71
Ahh thanks
JerkrattThread starterFair Lawn, NJ · Nov 10, 2008#72
so did the CEL eliminator work that cali sent? i see hes selling them online but did u guys confirm it works?
SplitEdmonton · Nov 10, 2008#73
i used that elbow bend for 3500miles and no CEL. I am now selling that CEL fixer for +$35 shipped. (its a piece of metal and it looks brand new) That guy wayne builds to order, i had to wait over a month for mine before he even built it. Mine is ready to ship same day as purchase/payment and I can verify that it works!
Thej3sta2Orlando, FL · Nov 10, 2008#74
post it up in the classiiiiissss
Malaya1221Torrance, Ca · Nov 11, 2008#75
been using HELP defouler for 3 wks now with no CEL!
whooppee777Maryland · Dec 1, 2008#76
Originally Posted by Split ↑
i used that elbow bend for 3500miles and no CEL. I am now selling that CEL fixer for +$35 shipped. (its a piece of metal and it looks brand new) That guy wayne builds to order, i had to wait over a month for mine before he even built it. Mine is ready to ship same day as purchase/payment and I can verify that it works!
i bought one from wayne last week. got it saturday. took only a few minutes to install. CEL went away in less than 10 miles. it works
cali yarisCanoga Park, CA · Dec 1, 2008#77
I have those in stock and they are cheaper from me. BOO on you whoopee 🙂
whooppee777Maryland · Dec 1, 2008#78
Originally Posted by cali yaris ↑
I have those in stock and they are cheaper from me. BOO on you whoopee 🙂
if i had been aware i would have bought from u and u know this