Replies continued
EasyDriverSouthern Michigan · Mar 21, 2009#151Nice job...looks professional! How did you run the wiring?
I got one 2 days ago and just ran it around and under the right side of the steering column. It tucks right into a seam along that side and just stays in place (pretty well). It rests on top of the steering column and when I park it I just slide it into the left glove box.
1NZYaris1New Zealand · Mar 21, 2009#152 Originally Posted by
EasyDriver ↑ Nice job...looks professional! How did you run the wiring?
I got one 2 days ago and just ran it around and under the right side of the steering column. It tucks right into a seam along that side and just stays in place (pretty well). It rests on top of the steering column and when I park it I just slide it into the left glove box.
Thanks
I just tuck the wire under the edge of the roof panel then removed the A pillar cover ,and then under the dash. 5 minute job. 👍
Jem_hadarCollingwood, ON · Jan 9, 2010#153FINALLY (as of Christmas day) the proud owner for a ScanGauge II! 😁😁
Originally Posted by
60 Somethings ↑ We are considering a ScanGauge for our liftback, and I like the idea of housing in in the driver's glove box.
That's were I leave mine. Just pop open the drivers glove box while crusing when wanna have a peak. Leaving it up when wanna actively watch it dont bother me. And i like that i dont need to Permanently mount it anywhere inside (so great to have that glove box there!!)
yarisugiハワイ · Jan 9, 2010#154I copy/pasted the trouble codes for Toyota and put it on one page.
Feel free to print it out and store it in your glovebox in case you need to reference it.
(Word document file)
1 attachment not included in this copy
127.0.0.1NE · Jan 9, 2010#155didn't know this thread was here. cansf ambient air works on us 2010 yaris 5 door hb
BuildCodeNorthern Illinois · Mar 14, 2010#156I've changed one of my Scanguage spots to read out TPS. How come the max is 81 (have seen 82). Is this accurate that the butterfly valve is only opening 81%, not that I think I'm missing out on some performance, but curious if by design there's no reason for it to open to 100% - or - the reading is not accurate.
FYI - I've never used a Scanguage in any other car 🙂
RickMN · Mar 14, 2010#157If Toyota's firmware design is similar to Ford's (I'm guessing it is) then it's not inaccurate and also not a direct indication of throttle position. To avoid needing precision calibrated throttle position sensors ($$$), they use a % of possible measurement range. The firmware learns what % indicates closed throttle and what % indicates WOT. Individual TPS sensors don't have to be 'exactly' like each other and that makes them much cheaper to produce.
It also means that as the TPS changes slightly over the life of the component it creates no problem. The firmware adjusts for the changes.
In the Ford world 0 volts = 0% and 5 volts = 100%. The Ford TPS output doesn't go down to 0v and doesn't go up to 5v. I see 21% to 92% on my Cobra.
There is a 'normalized to 100%' proprietary extended parameter but Scangauge doesn't use it.
BuildCodeNorthern Illinois · Mar 14, 2010#158cool! that's good to know, thanks for the detailed response
BilliamUSA · Jul 3, 2010#159jambo101Montreal Canada · Jul 4, 2010#160Didnt a vent mount clip come with the device?or maybe it was some other electronic gizmo,what ever it was it didnt work very well, I found a bit of velcro
was the easiest and most versatile way to mount the gauge on the dash just in front of the steering column.
BilliamUSA · Jul 4, 2010#161 Originally Posted by
jambo101 ↑ Didnt a vent mount clip come with the device?or maybe it was some other electronic gizmo,what ever it was it didnt work very well, I found a bit of velcro
was the easiest and most versatile way to mount the gauge on the dash just in front of the steering column.
I haven't ordered mine yet, but I don't think it comes with any mounts (maybe velcro). Anyway, I saw the windshield mount and this "vent" mount on ebay. Just wondering if someone had actual experience with this mount and Scangauge together. Our out-board vents are kinda weird, so I can see it not working too well. But if it does, it's a better solution than velcro, IMO.
kazama82Malaysia · Aug 12, 2010#162i notice that my odo meter is not the same as scangauge odo meter..scangauge shows faster increment compare to my car odo..anyone notice this?..for example now my car odometer at 90km, but my scangauge odo already showing 96km..
bkndacnHavre de Grace, MD · Feb 22, 2011#163So I just bought my Scangauge II from Garm and I've had it in my car for about 3-5 days now .....
On the first day that I had it in the car I drove down to DC (about 120 miles one way) as I do every friday night (work) and my scangauge told me I averaged 45 mpg for the whole trip (95% HWY 5% CITY) and then on the way back I averaged 43 (prob bc CC was on)
But looking at everyon elses #s I feel like thats too high!! lol and Ideas as to what might be causing this false readout? if in fact it is a false maybe i just have a super FE Yaris!
jambo101Montreal Canada · Feb 22, 2011#164 Originally Posted by
bkndacn ↑ So I just bought my Scangauge II from Garm and I've had it in my car for about 3-5 days now .....
On the first day that I had it in the car I drove down to DC (about 120 miles one way) as I do every friday night (work) and my scangauge told me I averaged 45 mpg for the whole trip (95% HWY 5% CITY) and then on the way back I averaged 43 (prob bc CC was on)
But looking at everyon elses #s I feel like thats too high!! lol and Ideas as to what might be causing this false readout? if in fact it is a false maybe i just have a super FE Yaris!
Dont you have to set a standard on the device by recording your first full tank of gas then inputting some parameters on your second tank of gas??
bkndacnHavre de Grace, MD · Feb 22, 2011#165yeah but it still tells me what my average MPGs are
KittPanama City, Panama · Feb 22, 2011#166Hey guys, just got mine today works pretty well!!
Picture not included in this copy I've got a few questions:
Anyone have experienced issues by placing it over the steering wheel because of the direct sunlight it may get there?
Is there any way I can read whenever the a/c compressor clutch is engaged?
Is it true that I can send codes into the ECU, like turning on/off the radiator fan for example?
http://www.verboom.net/info/speedste...16/xgauge.html jambo101Montreal Canada · Feb 24, 2011#167 Originally Posted by
bkndacn ↑ yeah but it still tells me what my average MPGs are
Is that the setting where the mpg reading is all over the place or the X gauge reading that posts average mpg by the day,the trip or the tank.?
KittPanama City, Panama · Feb 24, 2011#168soo what is your average water temp and idle rpm??
KittPanama City, Panama · Feb 25, 2011#169Has anyone been able to add the air to fuel ratio gauge on xgauge?
toy_torontoTarrana, Canada · Apr 16, 2011#170Thinking about getting one, found this info and thought I'd share this here:
$127.99 ($159.99-20% off) Use Promo Code AECCDX1 to get 20% off
Offer 20% off expires 04/18/11
Link here
Picture not included in this copy
jambo101Montreal Canada · Apr 18, 2011#171 Originally Posted by
Kitt ↑ soo what is your average water temp and idle rpm??
My water temp stays around 184-188
Idle RPM 710
toy_torontoTarrana, Canada · Apr 28, 2011#172* crossposting to this official thread =)
Finally decided to get one and I think it's great -- note the current units on display are in metric:
The gauges I use for now are:
Picture not included in this copy
• 7.4 L/100KM = 31.7 MPG (Ave Fuel Economy per tank)
• 421 KM = 261 Miles (Distance to Empty tank)
• 13'C = 55.4'F (outside ambient temperature)
• 789 RPM idle <-> Switches to Instantaneous MPG
* Edit: By the way, this is how I mounted the SC II against the windshield.
Material is plexi-glass from left over projects -- pretty strong/sturdy and does not move at all. Total cost = $0 😁
Picture not included in this copy
* View from backseat
Picture not included in this copy
.
RevssonSoutheast Wisconsin · May 1, 2011#173^Interesting installation.
I was thinking of trying something using the same "velcro" strips that the Illinois tollway
gives out to mount the I-Pass.
How hard is it to route the cable under the headliner?
Do you have any pics looking back into the windshield to see the back side of the install?
toy_torontoTarrana, Canada · May 1, 2011#174Sorry I don't have any pics looking from behind that's why I drew up the sketch of the mount. You can't tell it's there looking from the outside due to the tint on the (upper) windshield. It's not difficult to hide the wire under the headliner, just tuck it in under there.
I actually used the same velcro/fasteners they give you to mount your EZ pass or Transponder toll devices to your windshield.
From my pictures above you could actually see two other velcro/3m dual lock strips (right behind the ScanGauge) where I stick my transponder to.
.
RevssonSoutheast Wisconsin · May 2, 2011#175Now that you mention it, I do see the strips of velcro.
Illinois wants theirs mounted lower and more toward the driver's side,
IIRC. I mounted it more centered and below the tint, so it actually
sits behind the mirror and isn't seen by me unless I crank my head a little. 🙂
Thanks for the info and ideas!
Amdkt7Nashville, TN · May 15, 2013#176Got mine last night. Did the basic setup, have not adjusted the cut off setting, have not filled up. This morning I checked what I could on my drive to work. The speed readout was about 1.5 mph below the read out on my GPS, pretty close. The instant MPG reading seemed pretty close to the Eco-meter built into the car. The average for the trip was a little higher than the eco-meter. The SCII indicated 53 mpg avg, the Toyota Eco-meter indicated 51 MPG. I guess as I dial it in it should get more accurate.
I have mine set to fast updating, and I find it easy to watch.
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · May 15, 2013#177 Originally Posted by
toy_toronto ↑ * crossposting to this official thread =)
Finally decided to get one and I think it's great -- note the current units on display are in metric:
The gauges I use for now are:
Picture not included in this copy
• 7.4 L/100KM = 31.7 MPG (Ave Fuel Economy per tank)
• 421 KM = 261 Miles (Distance to Empty tank)
• 13'C = 55.4'F (outside ambient temperature)
• 789 RPM idle <-> Switches to Instantaneous MPG
* Edit: By the way, this is how I mounted the SC II against the windshield.
Material is plexi-glass from left over projects -- pretty strong/sturdy and does not move at all. Total cost = $0 😁
Picture not included in this copy
* View from backseat
Picture not included in this copy
.
Those 3M Dual-Lock fasteners are fantastic. I've been using them for probably close to 10 years for various car related and other uses.
mario98cPuerto Rico · Mar 28, 2014#178Anyone know if the scangauge can display knock retard values?
jambo101Montreal Canada · Mar 31, 2014#179As an instrument to measure MPG my Scangauge is useless and cant be trusted to give an accurate reading..
With a full tank of gas and sitting at the gas station I put in all the required parameters for setup in miles and gallons as the trip was entirely in the USA,also included an Xgauge setting to show me average MPG per day,went to the fillup and pressed DONE then off for a 2000 mile trip,MPG read steady at around 36MPG through the first tankful but when i refilled the tank with 8 gallons of fuel going to the fillup icon it said i just put 12 gallons in so i adjusted/recalibrated the 12 gallons back to 8 gallons and started off again but now the MPG reading was reading a steady 25MPG.Throughout the trip the amount of gas i actually put in got further and further away from reality and i saw fluctuations as low as a steady 10MPG to as high as 90MPG😕 The problem was probably my my fault but i cant figure out what i was doing wrong as the set up is quite straight forward and subsequent fillups should have read very close to the amount i was actually putting in the tank but in reality that fillup number just got further away from actual gas input..😕
Any one got an idea whats going wrong?
And can anyone suggest a less problematic MPG device?
Thanks
CTScottUSA, CT · Mar 31, 2014#180 Originally Posted by
jambo101 ↑ As an instrument to measure MPG my Scangauge is useless and cant be trusted to give an accurate reading..
With a full tank of gas and sitting at the gas station I put in all the required parameters for setup in miles and gallons as the trip was entirely in the USA,also included an Xgauge setting to show me average MPG per day,went to the fillup and pressed DONE then off for a 2000 mile trip,MPG read steady at around 36MPG through the first tankful but when i refilled the tank with 8 gallons of fuel going to the fillup icon it said i just put 12 gallons in so i adjusted/recalibrated the 12 gallons back to 8 gallons and started off again but now the MPG reading was reading a steady 25MPG.Throughout the trip the amount of gas i actually put in got further and further away from reality and i saw fluctuations as low as a steady 10MPG to as high as 90MPG😕 The problem was probably my my fault but i cant figure out what i was doing wrong as the set up is quite straight forward and subsequent fillups should have read very close to the amount i was actually putting in the tank but in reality that fillup number just got further away from actual gas input..😕
Any one got an idea whats going wrong?
And can anyone suggest a less problematic MPG device?
Thanks
The problem with how devices like ScanGauge, Ecometer, etc. calculate MPG is what they do when the car is standing still. If the car was always in motion it is very accurate, but as the ratio of in to not in motion increases it becomes a crap shoot.
As for the 10MPG to 90MPG fluctuations; That is actually normal. When the Yaris is under heavy load the MPGs decrease significantly. For example, driving up the 1/2 mile hill of the road that I live off of, I see a pretty steady 8-12 MPG. Coming down it I start off in the 80-90 MPG range (when my foot is still on the pedal) and I quickly hit DFCO where the scangauge shows 9999.
How DFCO is handled is probably another issue with how these devices do their calculations as well. You have infinite MPG during this period, so depending on how you average that in can skew things quite a bit in the opposite direction of averaging the theoretical 0 MPG while stopped.
YHWilliam09AL · Mar 31, 2014#181The only time my ScanGaugeII hasn't been very accurate was the first tank or two before setting it up. After that, it has been within 1mpg accurate on every tank. Maybe you got a faulty device, but I don't know.
A lot of people also love the UltraGauge, and it's less than half the price of a ScanGauge.
http://www.ultra-gauge.com/ultragauge/ I don't have any experience with an UltraGauge, so I can't tell you if it is any better or not. I do love my ScanGaugeII though.
AGDS91PARAGUAY · Feb 1, 2017#182Hi, ScanGauge it's compatible for JDM Vitz RS 2005 ncp91-AHMVK?
Es compatible con ese modelo?
pribekUsa · Feb 1, 2017#183Yes it is.