Does anyone know if there is any intake for the 1.3lt engine?
Any Aftermarket Intakes Yet?!?!?!?!
121 posts · 37,885 views · page 3 of 3
Replies continued
hey, im new... looking for piks on an intake install... i tried installing one myself yesterday but only got a "put-put" sound at idle before completely dying. everything was installed correctly so im guessing it might have something to do with the air/fuel mixture and ecu regulations, but im not sure. i noticed the car would stay alive but only after flooring it in neautral. help?
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
anyone has installed pic of this new TRD intake?
Picture not included in this copy
Picture not included in this copy
Originally Posted by du2efs ↑anyone has installed pic of this new TRD intake?
Picture not included in this copy
That one is not for the Yaris.
HOLY DEAD THREAD BATMAN!!!! 🤣
i cant see the pic but are you sure they re designed the TRD intake for the yaris...
Picture not included in this copy
THREAD NECROMANCER
Picture not included in this copy
Picture not included in this copy
LOL. But your pic doesn't work.
Picture not included in this copy
Picture not included in this copy
Garm you should add this picture as an emote on MI forums :P
GREAT idea.
oh now my pic doesn't work. LOL.
it's a smiley on our forums :threadnecro: -- thanks for the tip!
it's a smiley on our forums :threadnecro: -- thanks for the tip!
LOL Awesome!
been searching and can't find any info as to whether or not there really IS a TRD intake for the 2010-2011
the official catalog lists it as 06-09
the official catalog lists it as 06-09
^ Same thing. All the intakes I sell fit 2007-2011 and very likely 2012 too.
ok, I just know the official TRD catalog doesn't list an intake for 2010-2011
That would be 2009-2011.
one reason is because TRD is also made for Japanese, Canadian, European, and Aussie Toyotas.
All of which have different release dates and even release years.
ok back to the topic.
one reason is because TRD is also made for Japanese, Canadian, European, and Aussie Toyotas.
All of which have different release dates and even release years.
ok back to the topic.
my primary concern with putting a short ram intake on a 1.5L motor is that I will lose some low-end torque in order to gain some high-end horsepower. with that in mind I may just go with a TRD drop-in filter and call it a day.
i'm concerned with driving fun than with numbers, 2-3hp isn't worth it to me if you lose any grunt off the line. i spend most of my time city driving and I like torque for rapid takeoffs.
if anyone with an SRI on this car feels I'm wrong please feel free to correct me, every car responds slightly different to modifications. however as a general rule of thumb I've always lost low-end and gained top-end with an intake.
on my Lancer Ralliart (it was an automatic tranny), I could spin the tires at takeoff with the stock airbox, and with a full CAI....but with the SRI I couldn't. however passing power on the freeway was better as was throttle response.
my thinking is that the length of the stock intake coupled with the freely flowing TRD drop-in filter should net me a tiny increase in throttle response as well as freeway passing ability with only a negligible loss in low-end torque.
again, thoughts/comments welcome.
i'm concerned with driving fun than with numbers, 2-3hp isn't worth it to me if you lose any grunt off the line. i spend most of my time city driving and I like torque for rapid takeoffs.
if anyone with an SRI on this car feels I'm wrong please feel free to correct me, every car responds slightly different to modifications. however as a general rule of thumb I've always lost low-end and gained top-end with an intake.
on my Lancer Ralliart (it was an automatic tranny), I could spin the tires at takeoff with the stock airbox, and with a full CAI....but with the SRI I couldn't. however passing power on the freeway was better as was throttle response.
my thinking is that the length of the stock intake coupled with the freely flowing TRD drop-in filter should net me a tiny increase in throttle response as well as freeway passing ability with only a negligible loss in low-end torque.
again, thoughts/comments welcome.
I think you could counteract the loss of low end torque with a lightweight engine pulley
a valid point...
for some reason I keep forgetting there are lightweight pulleys available for this car.
the little motor is fairly torquey for its size and pulls nicely, but it could definitely rev faster. pulleys would help there.
for some reason I keep forgetting there are lightweight pulleys available for this car.
the little motor is fairly torquey for its size and pulls nicely, but it could definitely rev faster. pulleys would help there.