I don't know about anone else but im getting nervous as to the slow production of aftermarket for the Yaris.....mines an 07 but they've been out since 06....anyone hear of any intakes yet???
Any Aftermarket Intakes Yet?!?!?!?!
121 posts · 37,885 views · page 1 of 3
Replies 120
curious what you think you will gain with a CAI?? what maybe 1-2hp??
My Yaris is currently at K&N, I pick it up tomorrow. It's gonna be a short ram that they're developing, I'll give more details when I find out more.
I think a lot of people get CAI simply for the extra sound that it provides 👍Originally Posted by punchcurious what you think you will gain with a CAI?? what maybe 1-2hp??
ok, may i ask why a short ram, thats hot engine air it's sucking...Originally Posted by mykoleMy Yaris is currently at K&N, I pick it up tomorrow. It's gonna be a short ram that they're developing, I'll give more details when I find out more.
yeah dude....Im not building a drag car, I already have an exhaust system on her and looking to add an intake and headers thats all. Adding a little juice to a sweet car thats all.
A well built intake can help free up horsepower that factory plumbing eats up with restrictions meant to silence. I do not know how restrictive the Yaris' intake plumbing is, but odds are you should be able to regain 5 wheel horsepower.
That isn't a lot, but add that to a good exhaust system, lighter wheels, flywheel, etc, and it can add up.
That isn't a lot, but add that to a good exhaust system, lighter wheels, flywheel, etc, and it can add up.
thats what im talking about!!!!
i have blitz sus power intake, havnt installed it tho, this one should gain pretty well, i got at least 5-7HP from it on my G.
G?
G35
my baseline on that car was 227HP at the wheel, after the mods i got, its rougly 261HP. all i got is sus power intake, 350z intake tube, nismo cams, amuse ecu, fujitsubo y-pipe, straight mid and HKS rear section. the sus power intake alone gained 5-7HP on its own, the 350z tube added another 7.
according to blitz, using the SUS power plus their R-FIT fuel computer tuning, there is a gain of 12HP at the wheel for the NCP91 Vitz.
my baseline on that car was 227HP at the wheel, after the mods i got, its rougly 261HP. all i got is sus power intake, 350z intake tube, nismo cams, amuse ecu, fujitsubo y-pipe, straight mid and HKS rear section. the sus power intake alone gained 5-7HP on its own, the 350z tube added another 7.
according to blitz, using the SUS power plus their R-FIT fuel computer tuning, there is a gain of 12HP at the wheel for the NCP91 Vitz.
I don't beleive it but again to each there own, i had a turbo charged PT cruiser, the intake was the hot air type the air was then cooled by the intercooler, didn't add much in the way of hp to the car...
I doubt, just an intake will add 5 hp, to a 106hp car, but I could be wrong, i know nothing of this engine or what mods work on it...
also remember don't add up the advertised Hp rating to get your total, they all work together, on the pt the intake, downpipe, stage 1 computer, and 2.5' exhaust added maybe 15-20hp
and finally, afetr looking at the stock intake (breifly) I see no restrictions except a stupid bend, and it sucks hot air also.
I doubt, just an intake will add 5 hp, to a 106hp car, but I could be wrong, i know nothing of this engine or what mods work on it...
also remember don't add up the advertised Hp rating to get your total, they all work together, on the pt the intake, downpipe, stage 1 computer, and 2.5' exhaust added maybe 15-20hp
and finally, afetr looking at the stock intake (breifly) I see no restrictions except a stupid bend, and it sucks hot air also.
Yeah, from what I can see, the intake looks pretty straight forward and not too restrictive, including the U-pipe thing. The manifolds look like a weak spot and maybe the throttle body itself. Personally, I think a light weight flywheel is going to be my first mod... no need to make the car all loud if it's not going to net anything substantial.
Just curious, what do you expect to gain with a flywheel?
I have had the intake apart a couple of times and seems to me its quite restrictive. The stock airbox has a thick paper filter and a secondary filter (or silencer) neither of which look like they flow too well. The leg off of the airbox for drawing air into is only about 1.5" dia inside. I have pulled the leg off of my airbox.
There will never be substantial gains in any one aftermarket part short of NOS or forced induction. As was said, they all work in conjuction with the other. The intake only works to a point where its restricted by the exhaust. Maybe a cam is available already for the xB...
I can imagine replacing the intake, manifold, and complete exhaust may net almost 25hp on the high side. Combine that with a remapped ECU and a cam and you MAY see a lot more than that.
Getting a total of 130-140 hp would make a huge difference.
Buying a CAI alone like you say will net almost nothing but sound.
Personally I think the really weak point Ive noticed is the stock clutch, not so much the HP
I have had the intake apart a couple of times and seems to me its quite restrictive. The stock airbox has a thick paper filter and a secondary filter (or silencer) neither of which look like they flow too well. The leg off of the airbox for drawing air into is only about 1.5" dia inside. I have pulled the leg off of my airbox.
There will never be substantial gains in any one aftermarket part short of NOS or forced induction. As was said, they all work in conjuction with the other. The intake only works to a point where its restricted by the exhaust. Maybe a cam is available already for the xB...
I can imagine replacing the intake, manifold, and complete exhaust may net almost 25hp on the high side. Combine that with a remapped ECU and a cam and you MAY see a lot more than that.
Getting a total of 130-140 hp would make a huge difference.
Buying a CAI alone like you say will net almost nothing but sound.
Personally I think the really weak point Ive noticed is the stock clutch, not so much the HP
I'm not really expecting any measurable hp gains from a flywheel, but it may free up a few. I do expect it to make the existing power much more lively and accessable. I do agree the the air filter looks like a POS but that can be readily replaced with a TRD filter and the secondary filter in the top of the box looks so coarse it's hard to imagine it actually having any affect at all.
To tell you the truth, I haven't even disected the actual air box yet, but it seemed when i opened it up and looked inside, the air was being drawn from a majority of the surface area of the filter, which is a significant imporvement versus earlier air box deisgns that only drew on an area of the filter the diameter of the tubing projecting into the airbox. But I could be completely wrong as this is mostly speculation.
/just curious, but do you have any idea how to get that prefilter thing out of the box without damaging anything?
To tell you the truth, I haven't even disected the actual air box yet, but it seemed when i opened it up and looked inside, the air was being drawn from a majority of the surface area of the filter, which is a significant imporvement versus earlier air box deisgns that only drew on an area of the filter the diameter of the tubing projecting into the airbox. But I could be completely wrong as this is mostly speculation.
/just curious, but do you have any idea how to get that prefilter thing out of the box without damaging anything?
cold air intakes are useless, having the air filter placed in the bumper will suck in more dust and huge chance of hydro lock. plus 2-3 degrees colder isnt gonna make a big difference.
air flow is the key to power.
air flow is the key to power.
Dude,Originally Posted by mykoleMy Yaris is currently at K&N, I pick it up tomorrow. It's gonna be a short ram that they're developing, I'll give more details when I find out more.
Can you post pictures of your intake when you get it back from K&N?? that'd be sweet!!
Yes, a lightweight flywheel should help the car accelerate better.
The secondary filter is mounted permanently into the box on the four corners. I can imagine if you drill out the melt welds it should come right out.
Hyde, your argument against cold air pretty much proves its worth. Free air compared to stock, colder air as little as it is and if its in the fender what are the chances of hydro lock? (Unless you drive past the Home Depot in Burnaby during flood season...) Ive never had a problem with cold air kits but also have never had them make a measurable difference.
Hyde, your argument against cold air pretty much proves its worth. Free air compared to stock, colder air as little as it is and if its in the fender what are the chances of hydro lock? (Unless you drive past the Home Depot in Burnaby during flood season...) Ive never had a problem with cold air kits but also have never had them make a measurable difference.
TRD just introduced their cold air intake for both liftback and sedan models. part number is PTR03-52070 AND MSRP IS$350.00 US....... IT LOOKS a lot better than the xa/xb setup.
Sorry but for 350US it better make like 40hp
Originally Posted by ROCKLAND TOYOTATRD just introduced their cold air intake for both liftback and sedan models. part number is PTR03-52070 AND MSRP IS$350.00 US....... IT LOOKS a lot better than the xa/xb setup.
got some pics of this kit?
yeah, let's see some pics of this setup
i wa on the jap TRD site and wen I converted yen to Canadian $ the headers for the Vitz come to about $700!!! is that not a little much for one header???
LIKE THATS EVER POSSIBLE...... LIST PRICE IS 350 LARGE BUT since i get it for cost maybe we'll make a deal...... as for pictures if you can't use dealer daily then u have to wait for it to be on trdusa.comOriginally Posted by mikeukrainetzSorry but for 350US it better make like 40hp
A deal is great but 350msrp is steep for a cold air kit. I live on the west end of Canada, considering msrp is 350 + exhange + taxes + shipping thats one expensive kit. I wasnt serious about it needing to make 40hp, just a bit of sarcasm.
there is really no point of having the filter down into the bumper.Originally Posted by mikeukrainetz
Hyde, your argument against cold air pretty much proves its worth. Free air compared to stock, colder air as little as it is and if its in the fender what are the chances of hydro lock? (Unless you drive past the Home Depot in Burnaby during flood season...) Ive never had a problem with cold air kits but also have never had them make a measurable difference.
you get much more power gain with a highflow intake like the Blitz SUS power along with air/fuel tuning. the air is gonna get just as hot once it gets close to the throttle.
you never notice the most hardcore tuners or even ANY tuners in Japan actually have CAI in their catalogs. Only TRD USA or NISMO USA have CAI to cater to the ricer market in north america. you cant find the same part in the Japanese catalog. cuz everyone there know its useless. a stock airbox with high flow filter actually does a better job.
the closest thing to a CAI from the Japs is probably the racing suction from Blitz, and yet that still doesnt have a the air filter in the bumper.
yeah, most of the real cold air intakes actually take air straight through the front of the car with either a hood scoop or a hole in the front of the bumper/grille
"MOST OF THE REAL" intakes COULD YOU EXPLAIN THAT FOR ME.Originally Posted by eight_headsyeah, most of the real cold air intakes actually take air straight through the front of the car with either a hood scoop or a hole in the front of the bumper/grille
Do a search for Volant. Look at the one for the Scion xA or xB, its a closer match for how our's would look, except for the front ram part.. that would be hitting the radiator i believe.
Benifit of Volant intakes are, completely sealed larger box sucking air from factory location, using a high flow cone filter. Some models even have an optional Ram Air tube.
Benifit of Volant intakes are, completely sealed larger box sucking air from factory location, using a high flow cone filter. Some models even have an optional Ram Air tube.
1 attachment not included in this copy
For the lazy... 🙂
1 attachment not included in this copy
with an intake. You can expect up to 5 whp. For a small engine such as the yaris, i really expect about 2 whp. It is using the same engine as the xB and the xA. Dynoing my friends xB after a generic short ram intake with a k&N cone filter showed about 1.8 whp gain.
The flywheel replacement will provide much larger gains in hp. For instance, there are the fidanza flywheels that weigh only 8 lbs.
Another method is to use a lightened crankshaft pulley. This reduces the parasitic drag on the crankshaft and allows for improved responses. However, there are underdrive pulleys which underdrive the a/c and the distributor. Which is ok in a sense but for older cars, its not so safe.
The flywheel replacement will provide much larger gains in hp. For instance, there are the fidanza flywheels that weigh only 8 lbs.
Another method is to use a lightened crankshaft pulley. This reduces the parasitic drag on the crankshaft and allows for improved responses. However, there are underdrive pulleys which underdrive the a/c and the distributor. Which is ok in a sense but for older cars, its not so safe.
^ i think/hope you mean underdrive the a/c and ALTERNATOR...not distributor
volantis a good example as is ARC.(which ive seen on the tc). www.sciongarage.com all i know is the trd intake for the yaris is totally different from the xa/xb.NONE OF THOSE MESSED UP BENDS AND TWISTS
Where can we see pic's? How much? Whens it coming out?Originally Posted by ROCKLAND TOYOTAall i know is the trd intake for the yaris is totally different from the xa/xb.NONE OF THOSE MESSED UP BENDS AND TWISTS
👏
NOT SURE HOW TO POST PICTURES FROM WORK BUT ITS TOYOTA PANT BULLETIN 06-29
Send it my way, ill POST it.Originally Posted by ROCKLAND TOYOTANOT SURE HOW TO POST PICTURES FROM WORK BUT ITS TOYOTA PANT BULLETIN 06-29
Chris03hd@comcast.net
well a "ram air" intake which is often refered to as a cold air intake takes hot air from within the engine compartment... an actual cold air intake takes air from an area outside the engine compartment away from the heat either by using some sort of scoop in the hood or bumper or from an area real low such as right behind where foglights would go in the bumperOriginally Posted by ROCKLAND TOYOTA"MOST OF THE REAL" intakes COULD YOU EXPLAIN THAT FOR ME.
I thought a ram air intake IS one that takes air from outside? Jackson racing makes a nice one for my Miata. It's a flat filter in a plastic box which has this very narrow in height but wide slot opening which mounts right at gap between the hood and the nose of the car. It supposedly gives increases of up to 14hp.
http://www.jacksonracing.com/Shop/Vi...09&SortOrder=2
http://www.jacksonracing.com/Shop/Vi...09&SortOrder=2
Your correct LIZARDBOY...Originally Posted by LizardboyI thought a ram air intake IS one that takes air from outside? Jackson racing makes a nice one for my Miata. It's a flat filter in a plastic box which has this very narrow in height but wide slot opening which mounts right at gap between the hood and the nose of the car. It supposedly gives increases of up to 14hp.
http://www.jacksonracing.com/Shop/Vi...09&SortOrder=2
Eight's thinking of the term being tossed around called a Short Ram Air Intake. Popular with some of the Scion guys too. Instead of having an intake (take AEM for example) that has a bunch of twists and bends to get the filter as far from the engine heat as possiable (usually behind fog light area, that zone), a short ram air setup, is just a pipe directly off the TB, with a cone filter.. no heat shield (some have, some don't), plumbed right inside the hot engine bay.
Now tests have shown that once the car is "moving" the air in the engine bay is much cooler (duh!), but when at idle, its just sucking up lots of hot air, which does nothing for performance.
A true Ram Air intake does just that, "rams" (takes) air in from the outside, and duct's it directly into the intakes new box (look at Volant, Airraid, True Flow, etc. just to name a few) or somewhere inside the new intakes heat shield area. Some aftermarket hoods even have runners built into the mold, to connect the scoops or shakers on the hood, to feed the air right into the aftermarket air box! See Keystone, GoodHood, ProGlass, just to name a few. 😉
They have a really nice cold air intake made by toyota ask your dealer they can help you. My car accelorates a lot faster
Why is it the people posting that know of or have seen them, fail to leave out additional info such as price, heat shield, cone size, tube material, and most of all, PICTURES!?! Give us something for god sake! 🙄Originally Posted by KSIbuckyThey have a really nice cold air intake made by toyota ask your dealer they can help you. My car accelorates a lot faster
🤷
K&N posted a message requesting an 07 Yaris for performance intake development. I emailed them and they replied back, requesting my contact info to add to their database. They will need the car for 5 business days and may offer a rental if over 21. The owner would also get a free intake and the end of development. I'll let everyone know if they end up using my car. I don't know how long development would take though.
once again this is the incorrect name being tossed around loosely... an actual ram air intake takes it through a scoop or gap somewhere...but if you were to look up ram air intake you would get the "short ram intakes" which are really just a short pipe with usually a 45degree bend...Originally Posted by LizardboyI thought a ram air intake IS one that takes air from outside? Jackson racing makes a nice one for my Miata. It's a flat filter in a plastic box which has this very narrow in height but wide slot opening which mounts right at gap between the hood and the nose of the car. It supposedly gives increases of up to 14hp.
http://www.jacksonracing.com/Shop/Vi...09&SortOrder=2
development shouldn't take that long, those guys have made so many. Do it though......for the cause.....I would if I lived near.
Oh yeah, I'm definitely going to do it if they ask me to as long as they provide a rental.
http://www.trdsource.com/ has the TRD CAI for the yaris, pictures, Price, some other info, but not all that you are looking forOriginally Posted by Chris07LBWhy is it the people posting that know of or have seen them, fail to leave out additional info such as price, heat shield, cone size, tube material, and most of all, PICTURES!?! Give us something for god sake! 🙄
🤷
edit: for the lazy :) Picture not included in this copy
way to go J5
Yup! Good Job J5! They're not that far from me either! I wonder if that sport exhaust they list is a catback or just a muffler.