Yarisworld Archive

Back Seat Removal...

86 posts · 160,617 views · page 2 of 2

Replies continued

schleppyBoston, MA · Nov 1, 2009#51
Originally Posted by chongopants ↑
Has anyone weighed the rear bench with belts and all the junk behind it with spare? A weight chart would rock!, I dont have any way of weighing mine, plus its in storage.. please pm me if you guys do this...
I think (if I remember correctly), all the crap removed in the back amounts to a 100lbs or so.
chongopantsHouston · Nov 1, 2009#52
yeah, I appreciate it, but I am looking for more exact info.
advocatelocation · Nov 1, 2009#53
Originally Posted by why? ↑
well the front ones came off really easily. Bigger size though. I can't do anything to the rears, i have a feeling i've stripped them at this point...


In case you didn't already figure it out, this is my first time doing anything like this. I was able to remove the seat cushion and a few of the lower seat belt bolts, but i've given up on the brace for now. going to try again later on or tomorrow, and if i still can't get them i'm going to the store to see if i can get something that will help. I think it was removed once already by the peoples who installed my amp and when they put it back together i bet they way over tourqued it.


The magnitude of torque depends on three quantities: First, the force applied; second, the length of the lever arm[4] connecting the axis to the point of force application; and third, the angle between the two.


Basically, using the longest wrench possible helps a lot. Also make sure you have the right socket. They are torx bolts.
rtomDenver, CO · Dec 30, 2009#54
Has anybody measured their fuel economy before and after this mod?

I guess you could estimate the change just from the weight difference.
andru47Orlando, FL · Jun 20, 2010#55
Thanks for the write up. Got it done after hassleing with the torx bolts. My question now is for those who have removed the seats. Any tips for storing the bench in good condition? What did you guys do? Thanks.
rtomDenver, CO · Nov 9, 2010#56
I'm considering removing my 60/40 rear seats in my '10 LB to create more space for hauling. First item on my list: a 30" range. Best way to fit it in completely would be to have the 30" dimension of the range (which is the width of the range when it is oriented normally in a kitchen) oriented vertically in the car. In other words, the range would be on its side.

How much additional vertical clearance do you get from removing the rear seats in a LB?
Klink10910 · Nov 9, 2010#57
Originally Posted by andru47 ↑
Thanks for the write up. Got it done after hassleing with the torx bolts. My question now is for those who have removed the seats. Any tips for storing the bench in good condition? What did you guys do? Thanks.
Sitting in my shop covered in plastic. Probably sell it.
why?harnett county NC · Nov 9, 2010#58
Originally Posted by andru47 ↑
Thanks for the write up. Got it done after hassleing with the torx bolts. My question now is for those who have removed the seats. Any tips for storing the bench in good condition? What did you guys do? Thanks.
mine is sitting in a house about 1200 miles away. Don't really care about it.
Originally Posted by rtom ↑
I'm considering removing my 60/40 rear seats in my '10 LB to create more space for hauling. First item on my list: a 30" range. Best way to fit it in completely would be to have the 30" dimension of the range (which is the width of the range when it is oriented normally in a kitchen) oriented vertically in the car. In other words, the range would be on its side.

How much additional vertical clearance do you get from removing the rear seats in a LB?
maybe 6"? maybe a little more. it doesn't double the space back there.
bairjoFeb 9, 2011#59
I never thought i would take out the back seat. However i had a bag of salt/calcium chloride mix break open and it all over the place under the seats, spare tire, under the side molding. Freakin mess! Gota take the seat out to get it all cleaned out.
Klink10910 · Feb 9, 2011#60
Originally Posted by bairjo ↑
I never thought i would take out the back seat. However i had a bag of salt/calcium chloride mix break open and it all over the place under the seats, spare tire, under the side molding. Freakin mess! Gota take the seat out to get it all cleaned out.
That's ashame. Good luck. Try and find the cargo tray and get it. Worth what I paid back when.
ShinareOklahoma City, OK · Feb 10, 2011#61
Originally Posted by Klink10 ↑
That's ashame. Good luck. Try and find the cargo tray and get it. Worth what I paid back when.
Cargo Tray? Is this something pre-made for a yaris HB with the rear seat removed?
Klink10910 · Feb 10, 2011#62
Originally Posted by Shinare ↑
Cargo Tray? Is this something pre-made for a yaris HB with the rear seat removed?
Actually it was made as a Toyota accessory to use with the seat in. When I removed my seat which the back of secures the tray in place (to keep it from sliding forward), I fabricated some brackets and plastic to use the seat bolt holes to keep it secured now. Works like a champ. Had to, as I use this vehicle on occasion to fill my fuel containers and didn't want any spills. Easy to clean also.
yariSB86OH · Mar 5, 2012#63
First off, thanks for the DIY. Was very helpful.

So i removed my 60/40 sliding/reclining back seats. Was pretty simple after i realized that this DIY is based on a bench seat and not the 60/40 split. Only difference was that there is no removing the seat cushion from the frame, it all stays connected. I also removed the "middle" seat belt that hangs from the overhead. you know, that one that's RIGHT in the middle of the rear view mirror! The last pic is with the "spare tire cover" laid back in.

p.s. Torx bolts are a PITA when you stripe them...😠

Picture lost · sphotos.xx.fbcdn.net

Picture lost · sphotos.xx.fbcdn.net

Picture lost · sphotos.xx.fbcdn.net
why?harnett county NC · Mar 9, 2012#64
looks great, tell me about those torx bolts. I stripped one and had to go everywhere to find someone who could get it out. Finally found a guy at a body shop who was able to do it in a few minutes.
yariSB86OH · Mar 9, 2012#65
I used an 8mm socket wrench that took all but one bolt out. I had to hammer down a 7mm to break the seal.
watersoilairOntario, Canada · Apr 3, 2012#66
Hello,

I am looking to remove the rear backrest, not the bottom part. I do a lot of camping and need just a tad bit more space...could someone help with this? The tutorial doesn't really cover that part (unless I've missed it)! Thanks!

From Ontario, Canada
yariSB86OH · Apr 4, 2012#67
What back seat setup do you have? The bench or the reclining 60/40 split?
WeeYariGeorgetown, Ontario, Canada · Apr 4, 2012#68
Originally Posted by watersoilair ↑
Hello,

I am looking to remove the rear backrest, not the bottom part. I do a lot of camping and need just a tad bit more space...could someone help with this? The tutorial doesn't really cover that part (unless I've missed it)! Thanks!

From Ontario, Canada
I'm assuming you have the solid bench.

- You need to remove the two torx bolts from the rear mounting points accessible through the hatch

- You then need to pop off the bottom cushion to access two more torx bolts hidden beneath it. Since at this point there are only two more hex bolts left in the entire assembly, you might as well take everything out.

Socket for the torx is an E10 torx. Do not attempt to use an 8mm. Two hex bolts are 14mm
naossoanMB, Canada · Jun 4, 2012#69
Where can I buy the solid bench backs eat platform thing, for when the seats are removed? Really want one of these!
WeeYariGeorgetown, Ontario, Canada · Jun 4, 2012#70
Originally Posted by naossoan ↑
Where can I buy the solid bench backs eat platform thing, for when the seats are removed? Really want one of these!
What?
Klink10910 · Jun 4, 2012#71
Originally Posted by naossoan ↑
Where can I buy the solid bench backs eat platform thing, for when the seats are removed? Really want one of these!
To take it further, from what I understand of your question. Removal of the seat be it solid or 60/40 will leave a void. There is no platform available for purchase to fill it. You can make one as several on the forums have.
dvlnblkdrsorange, ca · Jun 4, 2012#72
so glad others are jumping on this awesome bandwagon.. i love mine 😁
why?harnett county NC · Jun 4, 2012#73
"We will slay these evil back seats wherever they may travel. They may have power, but we have justice on our side!"
mazillaSan Jacinto California · Jun 4, 2012#74
Picture lost · i205.photobucket.com
Picture lost · i205.photobucket.com
mazillaSan Jacinto California · Jun 4, 2012#75
Originally Posted by naossoan ↑
Where can I buy the solid bench backs eat platform thing, for when the seats are removed? Really want one of these!
Originally Posted by WeeYari ↑
What?

I'm assuming he means the seat frame only, the part that attaches to the floor...it makes you wonder what could have happened to his.
FrankMErie Pa · Jul 4, 2012#76
ill leave the seat in the car , told the wife she will have to drop about 75 Lbs , now thats going to leave a mark.
why?harnett county NC · Jul 6, 2012#77
after taking out all the rear belts and seats there are no dummy lights at all. Most people who take a look don't think there was a back seat ever, because the room back there looks so small.
Gigi is my girl <3Arizona · Jul 29, 2012#78
Can't wait to take my split seats out. I love them, but living away from family I never use them. I'm stoked to have more space for camping and roadtrips! I'm looking to build up a small platform to stash my gear under and sleep on top. I've done this before, at 5'6", I can sleep diagonal with no problem. If anyone has suggestions about the platform, I'd love to hear them.
RigojrManagua, Nicaragua · Aug 7, 2012#79
I have a 2008 Yaris Sedan and the back seat it a bit different to take off. My mom took it to get shampood and returned it to me with the back seat loose on one side. Can anyone please advise on what to look for and how to tighten the loose passenger side please???
Gigi is my girl <3Arizona · Aug 10, 2012#80
So, my little weakling arms couldn't get the bolts loose. I had the dealership remove them when they replaced my rear shocks! No more rear seats, more room for the roadtrip to Arches!!
vtencolumbus · Aug 14, 2012#81
just did my rear seat removal today , I had to cut one of the rear torx bolt with my recripo saw. the head of the bolt was actually snapped in 2 pieces !!.

now I can start with my audio project ...need to finish asap tho ...it's soooo noisy with the bare metal !
cutchinIndiana · May 17, 2013#82
After going thru He** to get the back seat cushion out on my 2007 sedan, I wanted to share with others how you do it. You pull straight up on the from of the seat. It is super hard to pull it loose. You'll swear that you're going to break something, but it will come loose. I had to call the dealer to find this out. The previous posts on this thread talk about the LB, but it wasn't clear if that also applied to the sedan. I couldn't find anywhere that the sedan was specifically mentioned. I thought this information might be helpful.
David gillespieCarrboro nc · May 24, 2013#83
I am beginning work now on a similar modification to my 2007 Yaris. First I am removing the back seat and the front passenger seat, then I am planning to level the passenger side of the vehicle from front to back so as to create a comfy place to sleep. I don't know if it will look as pretty as what you've got there but i hope to build something functional. My purpose in doing this is to facilitate a 4 month trip around the US. I intend on sleeping in my car for much of the trip.
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · May 24, 2013#84
Originally Posted by David gillespie ↑
I am beginning work now on a similar modification to my 2007 Yaris. First I am removing the back seat and the front passenger seat, then I am planning to level the passenger side of the vehicle from front to back so as to create a comfy place to sleep. I don't know if it will look as pretty as what you've got there but i hope to build something functional. My purpose in doing this is to facilitate a 4 month trip around the US. I intend on sleeping in my car for much of the trip.
Please keep us posted with your mods re this if you can 👍. This summer I plan to hit some of the U.S. locations my Yaris hasn't 'seen' yet, and I was thinking about removing the passenger seat only (not the rear seat) to create more room and to use for sleeping in a pinch (with the rear seat folded down).
El KapitanVancouver, BC · Feb 2, 2015#85
i know you've been gone for years but thanks for posting this. i love this forum.
attraperevesKCMO · Feb 8, 2015#86
I really want to do this as well. I'd love the have the increased storage space.