IsLNdbOiOriginal postLas Vegas, NV · Oct 27, 2008#1Anyone have pics. of where you've installed your tweeters? In my '07LB, I mounted them here:
Picture not included in this copyPicture not included in this copy
This time I'd like to mount them like this:
Picture not included in this copy
Picture not included in this copy
Not sure if I'd flush mount them there or put them on the angled mounting cups to point them more towards the driver and passenger.
I don't want to install tweeters on those door panels again because I always had noise coming from the tweeters when installed there. I replaced their wires (from the tweeters to the crossovers and from the crossovers to the amp.), changed the gains on my amp., tried ground loop isolators and even replaced the tweeters. Nothing fixed the hiss and noise coming from the tweeters when mounted in those door panels.
Not sure if the tweeters could be mounted on those pillars though (like in the bottom-most pic.) because I think I have side-curtain airbags behind them.
Replies 20
IsLNdbOiThread starterLas Vegas, NV · Oct 27, 2008#2battleversiontc808 · Oct 28, 2008#3i think they might make a pillar pod for the right side i have one in my crx from autometer thats for a rhd might have to do some searching as far as the single idk about that one have you tried ebay
IsLNdbOiThread starterLas Vegas, NV · Oct 28, 2008#4They make universal pods that attach to the A-pillar and have two gauge pods on each. Not sure though how well they'd fit on the Yaris's A-pillar. Also the gauge holes are like 2.5" in diameter. Too big for most tweeters.
natethegreat38Cali · Oct 28, 2008#5 Originally Posted by
IsLNdbOi ↑
Since the Yaris is sold around the world (for Right hand drive countries also), I'm sure you can buy one for a LHD car (US driver's side) and one for a RHD car (US passenger's side) ??? Did that make sense ????🤷
natethegreat38Cali · Oct 28, 2008#6oh, and BTW: I mounted my tweets on the door, which saved a lot of time and hassle. They are right next to the door handle, on the front end of the vehicle. It saved me from having to take off the A-pillar paneling, etc... I think they really look OEM. I will get some pix up soon
IsLNdbOiThread starterLas Vegas, NV · Oct 28, 2008#7They do make one that just snaps over the A-Pillar. It has two gauge pods on each one and it's a universal one so not sure how well it would fit on the Yaris's A-Pillar.
Driver's side:
http://www.glowshiftdirect.com/Unive...illar-Pod.aspx Picture not included in this copy Passenger's side:
http://www.glowshiftdirect.com/Unive...lar-Pod-1.aspx Picture not included in this copy I guess I could make do with these.
The driver's side one would have a tweeter in one pod and one of these in its second pod:
Picture not included in this copy I don't want or need a tach.. A compass would be much more useful to me.
The passenger's side would have the other tweeter and I haven't thought of what I'd put in its second pod yet.
natethegreat38Cali · Oct 28, 2008#8^^ not trying to knock your post, but the pix look the same... Maybe Glow Shift used the same pic for both??🤷
IsLNdbOiThread starterLas Vegas, NV · Oct 28, 2008#9Yeah, they did use the same pic. for both.
battleversiontc808 · Oct 28, 2008#10you could always shape it if its close by heating it up alittle cause i had to do that for my crx to put my rhd pod in
pennyracergrants pass · Jan 12, 2010#11Picture not included in this copy
Picture not included in this copy
IsLNdbOiThread starterLas Vegas, NV · Jan 12, 2010#12What's with all the necro. thread bumps lately?
cali yarisCanoga Park, CA · Jan 12, 2010#13IsLNdbOi, the sound is better from the first position.
pennyracergrants pass · Jan 17, 2010#14i would say you want all the speakers in the front stage pointed at you ware your ears are if at all possible ? thats what have been told
goku87AK · Jan 18, 2010#15 Originally Posted by
pennyracer ↑ i would say you want all the speakers in the front stage pointed at you ware your ears are if at all possible ? thats what have been told
you have the coolest speaker setup in your doors. just fyi. wish i could figure out how to replicate it.
pennyracergrants pass · Jan 18, 2010#16thank you i like the setup myself you dont see those around town in a yaris that is why i did them like that not to mention they sound pretty damn good if i must say myself
goku87AK · Jan 18, 2010#17 Originally Posted by
pennyracer ↑ thank you i like the setup myself you dont see those around town in a yaris that is why i did them like that not to mention they sound pretty damn good if i must say myself
If I get another Yaris, would you mind if I stole your idea?
pennyracergrants pass · Jan 18, 2010#18no problem i dont have any choice in what another person does with there yaris . i just wont hand someone all the info so i have to look at a copy of my setup on this site ! i do enjoy looking at other ideas on this site after all thats what makes this site works so well for me so much info to work with have you seen the doors without the panels on the whole car now top to bottom is double linned with raamat sound deadning the single best thing you can do to these little tin roller skates to kill the major road noise they produce . post pics if you decide to make some pods for the doors
goku87AK · Jan 18, 2010#19 Originally Posted by
pennyracer ↑ post pics if you decide to make some pods for the doors
oh i shall. :)
as for the road noise, not gonna lie, compared to my cavalier it was ridiculously quiet in my yaris lol.
pennyracergrants pass · Jan 18, 2010#20well if you rode in mine its big big difference from a stock yaris by far oh after you do the pods we can talk about a few things that you will come across after the job is done keep me posted its well worth it to have something most dont have :)
goku87AK · Jan 18, 2010#21Hmm sounds good.