Yarisworld Archive

What kind of add-a-fuse/circuit?

15 posts · 12,981 views

CallistoOriginal postCentral PA · Oct 22, 2008#1
I know there was a thread that answered this question before the hacking, and I was just planning on using that one for reference.

Now, I have to ask.

Since the Yaris uses low-profile fuses, do we need to use a special version of this little device, or do you just use the mini version and let the blades stick out a little bit?

A link to the specific piece would be helpful.

Thanks in advance.

Sorry, wrong forum, thought I was in the DIY..

Replies 14

RotorheaderLowell, OR · Oct 22, 2008#2
We have a couple different size fuses in several fuse boxes. Determine which fuse you want to tap into, then take that fuse with you to an auto parts store. Can't go wrong that way.
PHXDEMONPhoenix, AZ · Oct 22, 2008#3
Just use the normal mini size ones.
IsLNdbOiLas Vegas, NV · Oct 23, 2008#4
How do you use these open slots in the fuse box? Say I wanted a switched power source for an accessory like an audio source switcher for my HU, which open slot(s) in the fuse box could I plug it into? Is there a special plug I need to buy to attach to the accessory's power wire so I can plug it into an open slot in the fuse box?

The fuse box I'm referring to is the one underneath / behind the pocket in front of the driver's left knee / leg.
IsLNdbOiLas Vegas, NV · Oct 25, 2008#5
Anyone?
JerkrattFair Lawn, NJ · Oct 26, 2008#6
i hooked up my a pillar gauges and used the mini add a fuse with the cig lighter.. ill take pictures of it tomorrow.. all rainy and dark now
IsLNdbOiLas Vegas, NV · Oct 26, 2008#7
Cool. Looking forward to the pics.. 😉
sanityassassinv2Rock Hill, SC · Oct 27, 2008#8
Originally Posted by IsLNdbOi ↑
How do you use these open slots in the fuse box? Say I wanted a switched power source for an accessory like an audio source switcher for my HU, which open slot(s) in the fuse box could I plug it into? Is there a special plug I need to buy to attach to the accessory's power wire so I can plug it into an open slot in the fuse box?

The fuse box I'm referring to is the one underneath / behind the pocket in front of the driver's left knee / leg.
You just use the standard mini add-a-fuse. If you want a power source that switches on and off with the ignition, pull your accessory fuse and put the add-a-fuse in it's place. You should be able to identify the accessory fuse by looking on your fuse box cover for the fuse labeled "ACC" (or something along those lines.) The add-a-fuse holder has two fuse receptacles: one for the original curcuit and one for your new curcuit.

There is one wire that comes off the add a fuse circuit--you may connect that to the + lead of your accessory however you see fit (crimp connector, butt splice connector, soldered/taped connection, etc.) For the negative connection, run your - wire from the accessory to chassis ground. On my car (08 Liftback), there is a good ground connection under the kick panel in front of the drivers door and just below the fuse box.

When I get home today, i will try to snap some pix for you.
IsLNdbOiLas Vegas, NV · Oct 27, 2008#9
Thanks! Looking forward to the pics.. 🙂
sanityassassinv2Rock Hill, SC · Oct 27, 2008#10
Originally Posted by IsLNdbOi ↑
Thanks! Looking forward to the pics.. 🙂
Ok, so here is the fuse box and the ground point. You will need the add-a-fuse, and two standard mini fuses.

2 attachments not included in this copy

IsLNdbOiLas Vegas, NV · Oct 27, 2008#11
Thanks for the pics! So, the fuse box's lid / cover has a diagram that shows which fuse slot in the fuse box is switched or unswitched with the ignition? We can ue an add-a-fuse/circuit with any fuse in that fuse box?
sanityassassinv2Rock Hill, SC · Oct 27, 2008#12
Originally Posted by IsLNdbOi ↑
Thanks for the pics! So, the fuse box's lid / cover has a diagram that shows which fuse slot in the fuse box is switched or unswitched with the ignition? We can ue an add-a-fuse/circuit with any fuse in that fuse box?
I think the current limitation on the Add-A-Fuse is 10 amps (possibly more but I don't remember)--so use you can it anywhere there is a 10A fuse or less--on my car the ACC fuse is a 7.5A. The diagram on the cover doesn't say what is switched or not, but the ACC should be...you can verify this with a multi-meter or after you hook everything up.
JerkrattFair Lawn, NJ · Oct 27, 2008#13
u beat me to the pics but il post mine up as well for reffeance
IsLNdbOiLas Vegas, NV · Oct 27, 2008#14
Thanks Jerkratt! The more pics. the better.
JerkrattFair Lawn, NJ · Oct 28, 2008#15
sorry its raining outside so i could not climb into the car and get nice shots

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy