Replies continued
derickveliz2Central, MA · Sep 11, 2010#51The instructions for the Solo-Barics read "not to install the woofer upside down... and specify a 0.66 cubic feet only use sealed box."
Every component is different.
FcukThisThread starterseattle · Sep 11, 2010#52Palmer - Have you had any experience with the si v4?
I tested it a long while ago, (wrote a review in exchange for the sub). 1cu airspace, 1000 watts, polyfilled. Sounded great.
I would mount it normally... but i'm not sure how it'd sound with the small airspace..
That would be .85cu - driver's volume displacement. pumped 1,000 watts.
I'm not sure whether or not the driver is designed for inverting.. (Good thing to point out derick) Perhaps i'll shoot stereo integrity an email.
What's probably going to happen-- is that i'll try it both ways. Hear the difference for myself, and of course, pick the one i like more.
--------
Update on build log
Cut out another 3/4" mdf ring, mounted it underneath the face. This is going to add extra support to the sub. Bumping the total "ring" thickness to about 1 1/4".. It was really shallow (~1/2" because i countersunk the top ring)..
I'll post pics tomorrow.
I also took a 3/8" roundover to the outer speaker ring.
2 more layers of spectrum will be added to the plug!.. Just because!
Palmer812North Carolina · Sep 11, 2010#53The last woofer I had from them was a Magnum D2. That was several years ago. I would email Nick and ask his opinion.
sqcompBack at home · Sep 11, 2010#54I don't seem to remember Kicker ever telling me that my old Solo D 15's were only to be put in sealed enclosures...That's what I did, but still...
FcukThisThread starterseattle · Sep 12, 2010#55Meet Mr.ugly.
Here's the underside of speaker baffle,
Spectrum'd a few layers.
Added that 3/4" ring.
Put up a ghetto dowel fence.. to act as a frame for when i glass.
It was a pain in the ass.. I had to trim every individual piece to size, then hot glue them into place.. 🆘
Picture not included in this copy
side
Picture not included in this copy
The top being mounted. Glued, screwed, clamped.
I regret buying gorilla glue over titebond. Polyurethane glue is such a beezneetch to work with.. not to mention only half the strength as titebond.
Picture not included in this copy
Here you can see what i have to repair :[.
The gap which i must fill.. because i did a sloppy trim job. 👎
Lesson learned, FOR SURE.
I would just wrap the side of the plug w/ cloth.. and reglass. but if i did, it would create a hump that wouldn't sit flush with the trunk.
Picture not included in this copy
speaker ring rounded
Picture not included in this copy
sqcompBack at home · Sep 12, 2010#56What happened with the backside so that you needed to raise the baffle? Was it just how you cut it down?
I would imagine that you're going to find it difficult to just lay mat over the outside and achieve the result you're looking for. Do you have some kitty hair (long strand fiberglass filler)? I think that's what the 1/2" long strand fiberglass filler is in one of your pictures (don't forget the hardener). I would fill it from the inside if at all possible THEN trim it down from the outside. This is what I did to fill all my seams...eF titebond or silicone. I just glassed my seams.
This is what I used:
Picture not included in this copy
I'm thinking that'll solve the issue. No sweat needed.
FcukThisThread starterseattle · Sep 12, 2010#57Yeah, i was going to create a kitty hair mix.
It's essentially thick milkshake with long strand fiberglass correct ?
[body filler , resin. both hardeners.]
That's a good idea though-- starting from the inside of the plug. I was really only going to do it from the outside.. Silly me. I'll probably end up doing it from the inside as best i can, then the outside. Then trim it down.
The ring on the backside of the baffle is only there to reinforce the speaker ring.
The top ring is simply a vanity piece.
sqcompBack at home · Sep 13, 2010#58I think that 1/2" stuff you bought will work without adding resin.
Just to test it, add some cream hardener to a small little dab and see how it finishes.
I'm thinking that you'll do fine with the inside-out plugging...okay, that just sounded wrong. ANYWAY, you know what I mean. Let's see some progress pics with that when you have some.
derickveliz2Central, MA · Sep 14, 2010#59 Originally Posted by
sqcomp ↑ I don't seem to remember Kicker ever telling me that my old Solo D 15's were only to be put in sealed enclosures...That's what I did, but still...
I know what you mean, this comes from the manual...
Picture not included in this copy Manual link
FcukThisThread starterseattle · Sep 14, 2010#60I may be moving my build log to diyma.
I'll post a link if any one is interested to follow ?
derickveliz2Central, MA · Sep 14, 2010#61 Originally Posted by
FcukThis ↑ I may be moving my build log to diyma.
I'll post a link if any one is interested to follow ?
Yes, don't forget
the link! D.
nx04brampton · Sep 14, 2010#62yea post the link this is interesting
FcukThisThread starterseattle · Sep 15, 2010#63