Replies continued
speed1Lecco-Italy · Nov 9, 2012#51They go shopping using front bar.
They go driving using rear.
asproToronto, Canada · Aug 8, 2014#52Just finished installing mine. Nice product with nice fittings and hardware. Simple install. Felt a difference in steering input and it seems as if it let's you enter harder into corners and allows some room for mistakes. Not a huge difference though. Probably would have passed on it and put the money towards getting Garms intake manifold. Definitely looks good though.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
cali yarisCanoga Park, CA · Aug 9, 2014#53Looks good!
Originally Posted by
aspro ↑ Just finished installing mine. Nice product with nice fittings and hardware. Simple install. Felt a difference in steering input and it seems as if it let's you enter harder into corners and allows some room for mistakes. Not a huge difference though. Probably would have passed on it and put the money towards getting Garms intake manifold. Definitely looks good though.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
I'm thinking of getting one but not unsure on how to install. would you mind briefly doing over the details? Thanks
asproToronto, Canada · Aug 10, 2014#55Very easy. Jack up the car and remove the front wheels. Remove the tower brackets from the tanabe bar and and bolt up each bracket on the two strut towers (two bolts per bracket). It gets tight under the wheel well when trying to tighten the bolts up for the brackets but it works if you have the right tools. Then attach the bar to the brackets and adjust and tighten accordingly. Then re install the wheels and drop the car. Then inspect the install and make sure everything is still nice and tight. Then drive and enjoy. Also, after a couple hundred kilometers check everything again and make sure everything is still tight and secure. Its a really easy install with basic tools don't be intimidated by it. But its very important that you do the entire install with the car in the air and the load off of the front wheels.
Good luck!
asproToronto, Canada · Aug 10, 2014#56 Originally Posted by
cali yaris ↑ Looks good!
Thanks Garm! Thanks for the product!
cali yarisCanoga Park, CA · Aug 10, 2014#57[EDIT] whoops, cross post
1. jack up the front of the car, remove front wheels.
2. Remove fender liner (OR separate enough so you can reach up underneath
3. Install left and right brackets (black ones). Two people is way easier so you can get to the top of the bolt and the nut underneath, but I have done this alone before.
4. Adjust threaded end pieces to line up with bracket holes.
5. Install bar to the brackets.
6. Tighten everything, put wheels on, lower car. DONE.
Did I miss anything?
asproToronto, Canada · Aug 15, 2014#58Nope you got everything. I would suggest to just inspect the install after driving the car around a bit to make sure everything is still tight and secure.