Yarisworld Archive

Weapon R Header Broke

56 posts · 14,563 views · page 1 of 2

Malaya1221Original postTorrance, Ca · Oct 19, 2008#1
😠

Replies 55

Black YarisToledo, OH · Oct 19, 2008#2
this mostly happened due to the spherical joint being removed when an aftermarket header is installed.... My exhaust guy fixed this for me by adding a new one so their will be some flex
cleongSingapore · Oct 19, 2008#3
Seems like the header's flange didn't meet the midpipe's flange well enough and was "pulled" into meeting up and screwed up. Eventually the repeated heating caused metal fatigue that sheared the header's tube at a weak point.
PetersRedYarisThe Black Hills of South Dakota · Oct 19, 2008#4
I thought Weapon R was a descent brand?
Malaya1221Thread starterTorrance, Ca · Oct 19, 2008#5
Originally Posted by kurokoma-kun ↑
holy crap, sorry to hear that malaya 😲 looks like the weld right before sensor bung failed?
not sure yet where it failed kuro, haven't taken out the header yet....from what we could c u r correct, it seems like it broke from the o2 sensor but will take another pic once it's out!
kounj · Oct 19, 2008#6
Originally Posted by Malaya1221 ↑
yes, it's split in half by the o2 sensor!😠

calling WEAPON R....i need warranty on this!

hey garm, still thinking about the DC header that you got.....might just install the oem header!

Attachment 8427
that wouldnt have happened if you had the springs on those bolts.👍

1 attachment not included in this copy

TEHxFALLEN V1.2Calabasas, CA · Oct 19, 2008#7
Oh man, that doesn't look good at all!
largeorangefontSo Cal, OC · Oct 19, 2008#8
Originally Posted by kou ↑
that wouldnt have happened if you had the springs on those bolts.👍

Absolutely. That failed for two reasons, install error, and inferior fit.

Get a DC.
kounj · Oct 19, 2008#9
the only problem with fit is the pipe needs to cut down where they meet if cut prior to install it is fine. that nitto pipe looks to small.
PETERPOOPOahu · Oct 19, 2008#10
everyone knows weapon R sucks
SabretoothSt Cloud FL · Oct 19, 2008#11
First intakes that get "8hp" gains...now cracked headers...not looking good for them.
AstromanWenatchee, WA · Oct 19, 2008#12
Yet another reason I'm glad I got a DC header.
SabretoothSt Cloud FL · Oct 19, 2008#13
Hell even nobody is having issues with the Megan Headers....and everyone thought that was going to be the first to give problems.
ecoAtlanta · Oct 19, 2008#14
Megan header here,NP.And it was from the GB way back then.
saplaymateSATX · Oct 19, 2008#15
That wasn't the headers failure, thats all from modifying way the pipe mounts!

yes in general weapon does suck
llimoncevenezuela · Oct 19, 2008#16
you need the springs.. men .. because without the springs , the torque broke the header ..

the springs are a torque absorber .. be carefull
Malaya1221Thread starterTorrance, Ca · Oct 19, 2008#17
with this particular setup, i don't get the spring issue...maybe someone could enlighten me...🙂
AznGoukiCalgary · Oct 19, 2008#18
Crossing Weapon R off my list and adding DC
ROCKLAND TOYOTAROCKLAND COUNTY NY · Oct 19, 2008#19
😆 funny hearing all the THEY SUCK talk. maybe if installer had used proper hardware this would never had happened....
ChinoCharlesOH · Oct 19, 2008#20
Does the Weapon install guide call for using those springs? Did they even send one?

Come to think of it I don't think I've got mine on... hmmmmm.
ROCKLAND TOYOTAROCKLAND COUNTY NY · Oct 19, 2008#21
^^ KOU and i had this discussion this afternoon. it needs the springs...........
ChinoCharlesOH · Oct 19, 2008#22
I have to change my oil tomorrow anyway. Dammit, I was so ready to be done with the big ratchet...
PHXDEMONPhoenix, AZ · Oct 19, 2008#23
Like all the previous have said, this probably would not have happened if it was properly installed.
ROCKLAND TOYOTAROCKLAND COUNTY NY · Oct 19, 2008#24
Originally Posted by Malaya1221 ↑
with this particular setup, i don't get the spring issue...maybe someone could enlighten me...🙂
what so different about this setup????
ChinoCharlesOH · Oct 19, 2008#25
Without the springs, it isn't like the play between the header and center pipe is gone. It is still there, just without the constant push outward. I'm kind of confused myself to be honest.
Thej3sta2Orlando, FL · Oct 19, 2008#26
I just want to here how the damn thing sounds like that Loud As F___ im guessing
kounj · Oct 19, 2008#27
the springs are to hold the pipe against the header so when the motor move's it is not trying to pick up and put down the entire exhaust system,there is movement in every direction with the springs. without springs the torquing back and forth will fatigue the metal and crack.dont blame the manufacture for your own mistakes. i have been using this for over a year and it still looks as good as the day i got it.

1 attachment not included in this copy

ROCKLAND TOYOTAROCKLAND COUNTY NY · Oct 19, 2008#28
over a year and been on 2 yari........
ChinoCharlesOH · Oct 19, 2008#29
Thanks for the clarification kou.
kounj · Oct 19, 2008#30
your welcome, just want to make sure that everyone knows that this can happen to any header overtime without the springs,toyota put them there for a reason.
Malaya1221Thread starterTorrance, Ca · Oct 19, 2008#31
Originally Posted by kou ↑
the springs are to hold the pipe against the header so when the motor move's it is not trying to pick up and put down the entire exhaust system,there is movement in every direction with the springs. without springs the torquing back and forth will fatigue the metal and crack.dont blame the manufacture for your own mistakes. i have been using this for over a year and it still looks as good as the day i got it.
got it and i'm glad that yours is still in good condition!👍

it looks like u r an expert on this, so is it fair to ask that when fabricating a header back exhaust or turbo exhaust, the weld will not hold because of the vibrations, movements and weight of the entire exhaust system unless a spring bolt is used to bolt them on?
ecoAtlanta · Oct 19, 2008#32
Another reason to buy a torque damper for the engine.
kounj · Oct 19, 2008#33
Originally Posted by Malaya1221 ↑
got it and i'm glad that yours is still in good condition!👍

it looks like u r an expert on this, so is it fair to ask that when fabricating a header back exhaust or turbo exhaust, the weld will not hold because of the vibrations, movements and weight of the entire exhaust system unless a spring bolt is used to bolt them on?
header back exhaust should always have some kind of flex joint so that the is some play.turbo is another story as alot of the manifolds are shorter and cast pieces with extra support brackets for the weight of the turbo and down pipe but after that there should be a flex joint.
Malaya1221Thread starterTorrance, Ca · Oct 20, 2008#34
thanks kou.
Malaya1221Thread starterTorrance, Ca · Oct 20, 2008#35
Originally Posted by ROCKLAND TOYOTA ↑
what so different about this setup????
have the nitto mid-pipe with the weapon r and while installing it using the oem bolt spring, the screw was all the way to the end of the treads but it still had a gap(fit was not snug) so comes the air leak!
YodaFL · Oct 20, 2008#36
Originally Posted by eco ↑
Another reason to buy a torque damper for the engine.
^^+
SplitEdmonton · Oct 21, 2008#37
Originally Posted by Malaya1221 ↑
yes, it's split in half by the o2 sensor!😠

calling WEAPON R....i need warranty on this!

hey garm, still thinking about the DC header that you got.....might just install the oem header!
can we get a video clip of this thing at WOT from inside the car?
Malaya1221Thread starterTorrance, Ca · Oct 21, 2008#38
^ IT IS LOUD!😁

if u close ur eyes u wouldn't believe it's the yaris!

on idle, bog bog bog bog!😛
White YarisWarm Orange County · Oct 21, 2008#39
that sucks... Hey you had fun with it right?
Malaya1221Thread starterTorrance, Ca · Oct 21, 2008#40
^ absolutely! i like the 4-2-1 type header but the weld on the o2 sensor where it broke had rust on them...IMO, the weld on the last tube was not primo!

got me a dc header (4-1) from garm for a very reasonable price!😁
ztrack157Biggs, CA · Nov 15, 2008#41
I have thought about this over the last few weeks and I have the answer to why this happened. There is a flaw in Weapons design of the header that Megan and Toyota didn't have. Do you remember the side bolt that was on the bottom of the stock exhaust? That is for this very sort of occurence. It prevents the exhaust from rattling around and reduces vibrations. This is why I haven't had a problem with my megan. Other people who have other headers maybe even the Weapon itself might not have the same issue as you did. But not having that extra anchoring point is likely the culprit.
kounj · Nov 16, 2008#42
read the entire thread the reason has already been found.
ztrack157Biggs, CA · Nov 16, 2008#43
Just because your theory on what happened is accepted doesn't mean it was the only factor. I'm just offering more into what caused the malfunction. Theres a bunch of things wrong with this set up.
kounj · Nov 16, 2008#44
how, it bolts on the same way.if you dont put the springs back on the bolts like it is stock any header will snap with fatigue.
Malaya1221Thread starterTorrance, Ca · Nov 16, 2008#45
no need to argue boys, weapon r gave me a warranty on this!😉

yup, only weapon r header doesn't have a side bolt!
kounj · Nov 16, 2008#46
nice of them to do that.
Malaya1221Thread starterTorrance, Ca · Nov 16, 2008#47
yup, they decided it was their fault and i'm one happy customer!
bobobitchAmarillo TX · Nov 16, 2008#48
so do you know if weapon r is going to fix that problem?
ztrack157Biggs, CA · Nov 16, 2008#49
They should for future models.
kounj · Nov 16, 2008#50
i suppose it could be a problem but i have had know issues for 2 years and 2 cars. the point is you need the springs, they have to be there..