I used a small screwdriver (think computer repair screwdriver), and wrapped it in a microfiber towel, and it pops right out. Just gotta be careful to not pry too hard and break the clips. And don't scratch your paint! I pryed along the bottom just in case too, so if I damaged the paint it'd be below the badge and not as noticeable.Originally Posted by Darb ↑Good good, went down to my parent's house. Mostly relaxed. Today my and my girlfriend's 2nd anniversary.
Hey, while you're here. I'm looking at the thread on replacing the front badge. You said you used a screwdriver, how easy was that? I've found my fingers are too big for the grille method. May have to pop the bumper clips.
Unfortunately, there is no DIY with photos. I may do that up in the process.
What are you doing right now?
26,814 posts · 3,433,291 views · page 320 of 537
Replies continued
And Hi Mike/Long.
Morning everyone. I have been busy catching up on some comedy shows and thought I would drop in and and say hello! :]
Hi baby. 😎Originally Posted by Sami ↑Morning everyone. I have been busy catching up on some comedy shows and thought I would drop in and and say hello! :]
Hello darling. 😁Originally Posted by ryank ↑Hi baby. 😎
Hope work is going swell for everyone! Well I am going to go and watch 'Easy Virtue' online and maybe finish up my book. 😁 I shall talk to you all later.
Later, have a good day! 👍Originally Posted by Sami ↑Hello darling. 😁
Hope work is going swell for everyone! Well I am going to go and watch 'Easy Virtue' online and maybe finish up my book. 😁 I shall talk to you all later.
Morning, Sami.
🙄Originally Posted by KCALB SIRAY ↑Nice place, and good call on going with the woman. It was a trick question to begin with haha
Hmm, I have a bad relationship with clips... I tend to break them. I'll see if that works... lightly. Thanks for the info.Originally Posted by ryank ↑I used a small screwdriver (think computer repair screwdriver), and wrapped it in a microfiber towel, and it pops right out. Just gotta be careful to not pry too hard and break the clips. And don't scratch your paint! I pryed along the bottom just in case too, so if I damaged the paint it'd be below the badge and not as noticeable.
enjoy your day YW, I'm off to get on the road. Darryl, I'll wave to you as I drive by. I have to go to Woodland Crossing and Franklin Farm today. See ya!
Later, Mike. Have a good drive.
darb, it is apr 26 in framingham, ma, its on the calendar.
I see. No can do. Mom's birthday.Originally Posted by AlexNet0 ↑darb, it is apr 26 in framingham, ma, its on the calendar.
Good morning, YW! =) Happy Monday!!
Hullo Lisa. How's it going?
For a Monday, it's going pretty well, thanks.
How are you?
How are you?
Doing well, slow day at work. Poking around the tires and rims section.
G'morning everyone. Just trying to do some homework at the moment...errr...searching YW actually. Shouldn't be too long of a day, depends on how my group project goes this afternoon.
Just finished re-doing homework!
Off to class... Laters YW
Off to class... Laters YW
Just got back from Subway.
Just got back from lunch. Club sandwich, here.Originally Posted by ryank ↑Just got back from Subway.
Argh, just got a minor crisis to deal with. Yay...
Hi guys =) I am bored subbing for the receptionist at my work. *yawn* Mondays =( One of my kitties is probably in surgery about now =( He has a growth on his belly and they don't know what it is.
RYAN, car looks good with pieces in black. you should do black side skirts also.....
Is there such a thing? 😆Originally Posted by SIPNGAS ↑Happy Monday!!
If we pretend maybe we can make is so....Originally Posted by eTiMaGo ↑Is there such a thing? 😆
maybe.... 😁
On the road, just wanted to say howdy. Howdy!
Howdy!Originally Posted by KCALB SIRAY ↑On the road, just wanted to say howdy. Howdy!
Forums and driving at the same time?
no, I'm over on Sunrise valley Dr
There's something oddly satisfying about informing rabid "Pro-Big 3, buy American" car enthusiasts that their vehicle is assembled in Canada or Mexico...
"I see," said the blind man.Originally Posted by KCALB SIRAY ↑no, I'm over on Sunrise valley Dr
and parts made in China and India👍Originally Posted by Darb ↑There's something oddly satisfying about informing rabid "Pro-Big 3, buy American" car enthusiasts that their vehicle is assembled in Canada or Mexico...
What's going on over at Sunrise Valley?
I'll keep an eye out for you when I get out of here in 30.
I'll keep an eye out for you when I get out of here in 30.
A few months ago I was at a gas station and this old guy started talking in a really loud voice to a Harley owner/rider who was filling up behind me about how he was happy to see someone who "stayed true" and bought American made products.
Wow, he found out pretty quickly that he picked the wrong girlie to mess with. Since HD is one of our biggest customers I was able to tell the dude exactly where each and every flipping part of that bike came from, from the wheels produced in Australia to the speedometer from Japan. The only thing American about those bikes anymore is that they are ASSEMBLED here.
Neither one had much to say after I was finished. =)
Wow, he found out pretty quickly that he picked the wrong girlie to mess with. Since HD is one of our biggest customers I was able to tell the dude exactly where each and every flipping part of that bike came from, from the wheels produced in Australia to the speedometer from Japan. The only thing American about those bikes anymore is that they are ASSEMBLED here.
Neither one had much to say after I was finished. =)
where are you located, is it a store front or office? I'm at Woodland Crossing
Hey Lisa, I'll tell Long your starp-on is waiting, lol
NICE. 🤣Originally Posted by KCALB SIRAY ↑Hey Lisa, I'll tell Long your starp-on is waiting, lol
ok, I'm out, gotta go...later
Office, at the very back of Business center drive.Originally Posted by KCALB SIRAY ↑where are you located, is it a store front or office? I'm at Woodland Crossing
Awesome, Lisa.
What do you do that HD is a customer? Import?
What do you do that HD is a customer? Import?
Thanks, and I tried the side skirts and didn't like them. They come up too far on the side.Originally Posted by BLAZINBLUEVITZ ↑RYAN, car looks good with pieces in black. you should do black side skirts also.....
We package parts to sell in the retail HD stores. We calibrate speedometers for those who are replacing or up-grading. Also, we ship complete bikes (in pieces, in crates) to Brazil. Where they are reassembled and sold.Originally Posted by Darb ↑Awesome, Lisa.
What do you do that HD is a customer? Import?
We also export bike parts to China.
A little over an hour to go..
Ah, yeah, he did pick the wrong person to mess with. 👏
Welcome back, Ryan.
Welcome back, Ryan.
I was just so mad that he was talking loud enough for me to hear insulting my gas-saving car in favor of a bike so NOT American and his gas guzzling Chevy Malibu. As much as I wanted to ignore, I couldn't. =)
Taking an extended weekend so I can nap all day
can't tell, what kit is that?Originally Posted by ryank ↑Thanks, and I tried the side skirts and didn't like them. They come up too far on the side.
Kaminari lip kitOriginally Posted by BLAZINBLUEVITZ ↑can't tell, what kit is that?
YEAH, skirts are kinda undesirable to me as well......Originally Posted by ryank ↑Kaminari lip kit
Maybe later on I'll look for some better skirts. Right now $$ is tight. 🙁
Leaving work. Later all.
been up for a little while.. ate my leftover ribs for breakfast & watched BOLT.. super cute movie....
Doing School work which is Homework but I'm calling it school work because I'm at schoool doing Homework.
bolt...isn't that hamster cute?!@?!
bolt...isn't that hamster cute?!@?!