Replies continued
kroloswa state · Sep 5, 2010#51 Originally Posted by
rningonfumes ↑ http://www.google.com/search?hl=en&s...&aq=f&oq=&aqi= It's best to have the oil level as close to the middle mark as possible or at least from half to full. The oil level isn't like the brake fluid or other fluids where you should be at the full mark.
For now you should be okay.
I don't know If you got that Right my Friend???
factory fill level is above the full mark by a 1/4"+,I get my OIL change at a very trusted shop , they specialize in Toyota and other Imports,they fill it
to spec 4 qt. and it comes to above the full mark 1/4''+, same thing at the
dealer where I had my 1st oil change .
Yes I know how to read a Dip Stick.?
sickpuppy1Kansas · Sep 5, 2010#52FYI, for those of you that have Oreilly auto around you, they have an add today selling 5 qts of irelly full sythetic oil and a Wix filter for 19.99 good price!
The wife Highlander is due anyways!
Chuck GThe Great Northwest · Sep 5, 2010#53 Originally Posted by
krolos ↑ I don't know If you got that Right my Friend???
factory fill level is above the full mark by a 1/4"+,I get my OIL change at a very trusted shop , they specialize in Toyota and other Imports,they fill it
to spec 4 qt. and it comes to above the full mark 1/4''+, same thing at the
dealer where I had my 1st oil change .
Yes I know how to read a Dip Stick.?
My 2010 was above the full mark as well.
RedRideMiddletown, NY · Sep 6, 2010#54I have no idea why now, some are saying that you shouldn't add oil to the full mark. That's what the *&%* mark is for!
In fact, if it's slighty above the fiull mark it perfectly OK.
Als long as there is no indication of oli foaming when the enging is run hard, you are fine no matter how high the level is.
kroloswa state · Sep 8, 2010#55 Originally Posted by
RedRide ↑ I have no idea why now, some are saying that you shouldn't add oil to the full mark. That's what the *&%* mark is for!
In fact, if it's slightly above the full mark it perfectly OK.
Als long as there is no indication of oil foaming when the engine is run hard, you are fine no matter how high the level is.
If you fill it to factory spec. it is going to be a little above the full mark, {4qt}
anyone who says otherwise is just simply wrong.
2007yarizNorthern Virginia · Oct 26, 2010#56Hey guys! Just to be sure, the oil pan and its drain plug are underneath the front passenger seat(shotgun)??
I am so jealous that the OP has a metal dipstick, mine is plastic plus the color is YELLOW! Why Toyota? Motor oil is YELLOW!
What kind of dipstick do you guys have(metal or plastic)?
Klink10910 · Oct 26, 2010#57Plastic
rningonfumesThread starterSoCal · Oct 26, 2010#582007Yariz,
Yes the oil pan and the drain are under the passenger side. I'm sorry about the metal dipstick, lol. Maybe 2008 was when they changed the dipstick?
Good luck with the change!
AltitudeColorado · Oct 26, 2010#592008 - Metal dipstick.
2009-metal.
why?harnett county NC · Oct 28, 2010#61is it bad i don't know this?
bail_wBay Area, CA · Oct 30, 2010#62Why no Fram?
rningonfumesThread starterSoCal · Oct 30, 2010#63Why? - Nothing wrong with the plastic dipsticks.
Bail - In the past regarding the lower end Fram filters, they aren't very high quality in relation to their competitors.
bail_wBay Area, CA · Oct 31, 2010#64How about now then?
Klink10910 · Oct 31, 2010#65Not to but in....but Frams are out. I know Wally World sells them in abundance but they also sell Supertech which gets much better reviews. Check my garage for the size as I don't remember right off hand.
bail_wBay Area, CA · Oct 31, 2010#66Yep, Wally World sells them. I was looking into the Fram Xtended Guard series, and i don't think it was as bad as the Extra and Tough Guard series filters. Anyway, I installed a Xtended Guard on my 98 Corolla, i will cut it out for inspection after 3k mileage.
TXyarisTX · Aug 12, 2011#67 Originally Posted by
RedRide ↑ Yes. Most service depts and local garages do not prefill a filter.
While it is a good thing to do no harm will come to an engine if you don't.
As Yaris Hilton said, it only takes a couple of seconds for it to fill and oil pressur to build up.
Just don't redline it the second you start it and it will be fine. 😉
damn.. thats what i always do! lol
biggyjiggyMoreno Valley, Ca · Jul 18, 2012#68just did my first oil change on my yaris :) since ive had it. Thank you very much for the write up it helped alot :)
junorico24Sydney · Jul 18, 2012#69I have worn the thread of my sump bolt.Anyone know where i can get a new one?
rningonfumesThread starterSoCal · Jul 19, 2012#70Try your local autoparts sort, the worse they can say is "no". Then you'll have to try the dealership.
edmscanCanada · Jul 19, 2012#71I have a plastic dipstick 👎... I was shocked when I first saw it. Even my old 87 Honda Accord had a metal dipstick.
tooterLos Angeles · Jul 19, 2012#72Mine is metal (2012)... I put 4 quarts in and run it a little high with no foaming issues. On the first oil change I drilled the drain plug and stuck in a really strong neodymium magnet to catch the iron powder. 🙂
jRossIndianapolis, IN · Jan 1, 2013#73I just did an oil change with penzoil platinum synthetic oil and a fram tough gaurd filter. I must ask, what's ur beef with fram? I've always used fram...
bronsinnj · Jan 2, 2013#74 Originally Posted by
jRoss ↑ I just did an oil change with penzoil platinum synthetic oil and a fram tough gaurd filter. I must ask, what's ur beef with fram? I've always used fram...
Me too. I dont know whats up with FRAM but I dont see cars on the side of the road with blown engines from using a FRAM filter....
...or car manufacturers warning against using them....
David CMontreal · Jul 28, 2016#75Thanks for the write-up, this should be a sticky or at least in the DIY compilation.
cocochannelMontreal · Sep 3, 2016#76I'm using Fram filters (tought and ultra synthetic) and Castrol Syntec from 2007 and no problems.
David CMontreal · Aug 2, 2017#77Bump for sticky.
IllusionXBrossard, QC · Aug 2, 2017#78Wow, this post has been around since 2008. :)
Nothing wrong with Fram except the filter ends inside is made of cardboard, so that might fail, if it does.
I've been sticking with OEM filters as they are cheaper than Fram anyways. But it did happen when I did not have time to get to the dealer, so I just grab a Fram from Walmart.
Else, I've used Amsoil EK filters.
Sent from my SM-G930W8 using Tapatalk
GibbsYaris07Charlotte, NC · Oct 16, 2017#79I just changed my own oil yesterday after wasting 1.5 hours of my life waiting for a service APPOINTMENT, then telling me they're extremely backed up (Could've gave me a heads up). I went home, jacked it up and changed my own oil/filter in 35 mins. Much easier to DIY rather than drive to a shop then wait. This car is easily accessible for oil changes. I was even able to explain step by step to my eldest daughter as she watched me. I told her this may be her car one day so pay attention. lol
IllusionXBrossard, QC · May 19, 2018#80Sure, depends on your hands and how big you are.
I'm able to slide under and reach over, but it's hard to remove the oil filter IMO
Originally Posted by BlackTy ↑
Can I do this without raising my car?
Sent from my ONE A2005 using Tapatalk
David CMontreal · May 19, 2018#81An easy inexpensive solution I found was to double stack 2 pieces of 2x6 lumber and place them in front of each wheels and drive on them. You then effectively raise the car by 3" off the ground with all 4 wheels leveled and the lumber is strong enough to support the weight of the car. That additional 3" really make a big difference in term of clearance under the car. Cheap and quick, instead of buying ramps that have the car slanted.
IllusionXBrossard, QC · Jan 9, 2019#82 Originally Posted by Jboss ↑
What kind of tools do you guys use to remove the oil filter if its tough to get off because of the awkward spot of being under the car? I've seen the one where you can tighten it on the filter, and there's a oil filter cap that you use with a wrench?
Any of these will do.
Sent from my CLT-L04 using Tapatalk
FunctionSpec626, Southern California · Jan 10, 2019#83Lisle 63600 Oil Filter Tool
dogsridewithUSAnotCA · Jan 10, 2019#84First change w/ a Lowe's Husky brand all black rubber strap wrench. (Much like the red ones in above photo.) Takes a touch, but this tool is an absolute must for the general purpose toolbox.
Second change filter (white SKS?) has a nice male hex about the size of a lug nut or a bit smaller.
Not ones in photo, but a couple of my cheap cup-type filter sockets were garbage.
dogsridewithUSAnotCA · Jan 10, 2019#85 Originally Posted by
David C ↑ An easy inexpensive solution I found was to double stack 2 pieces of 2x6 lumber and place them in front of each wheels and drive on them. You then effectively raise the car by 3" off the ground with all 4 wheels leveled and the lumber is strong enough to support the weight of the car. That additional 3" really make a big difference in term of clearance under the car. Cheap and quick, instead of buying ramps that have the car slanted.
On a part of my lawn that slopes just right, I drive the front wheels onto shallow plastic ramps. Vehicle is level. (What I do, w/ chocks and brakes. Not advice.)
LeegamerAshland, VA · Jan 10, 2019#86 Originally Posted by Jboss ↑
What kind of tools do you guys use to remove the oil filter if its tough to get off because of the awkward spot of being under the car? I've seen the one where you can tighten it on the filter, and there's a oil filter cap that you use with a wrench?
I've never had much luck with oil filter wrenches. If It's that tight I usually just shove a long flat head screwdriver through the filter and use it for leverage.
komichalCZ · Jan 11, 2019#87 Originally Posted by
Leegamer ↑ I usually just shove a long flat head screwdriver through the filter and use it for leverage.
That is a messy way. Filter is full of oil.
LeegamerAshland, VA · Jan 11, 2019#88 Originally Posted by
komichal ↑ That is a messy way. Filter is full of oil.
I have a pan under it, usually not that bad honestly.
Doesn't happen much, I can undo it by hand 95% of the time.
IllusionXBrossard, QC · Jan 11, 2019#89 Originally Posted by
komichal ↑ That is a messy way. Filter is full of oil.
Even with the tool, oil will leak all over the place as there is oil up in the engine as well, and can't be drained.
Sent from my CLT-L04 using Tapatalk