Yarisworld Archive

Microfiber from hell!!!

31 posts · 7,422 views

jenaraeOriginal postAnaheim · Sep 21, 2007#1
OK, so today I went out to Pep Boys to buy a Microfiber glove since my bro got one and said it works very well, so i decided to get one...

Picture not included in this copy

I get back in my car with my friend and decide to test it out on my semi-dusty dash. It worked just as planned. 👍 As I'm leaning over my friend to put it away in my glove box, my friend notices something weird going on with the clock display thing. I look up and i see this:

Picture not included in this copy

WTF!!???!? The display was like bleeding or something!? I was so upset! I couldn't come up with any other explanation other than the micro fiber glove and maybe some sort of static electricity messing with the display. My friend said she heard static when i was wiping away.

As I'm driving away and calling my dealer to see if i can take it in tomorrow morning to get this taken care of i notice that the globs of bleeding are disappearing and it's going back to normal. Eventually the display looks normal again and there are no globs of crystal or whatever that stuff is made of.

I'm so confused! What do you guys think caused this? The microfiber? Static electricity from it? Even though there is the plastic covering to protect the speedometer and what not...

My brother uses the same one and this has not happened to him and the packaging of the glove has no warning of any type. I want to throw out that glove now, but i don't really know if it was the cause or it was just coincidence? 🤷 A little help guys...

Replies 30

eTiMaGoBangkok, Thailand · Sep 21, 2007#2
hmmm it may be static, acter all, these LCDs work by using electricity to turn them transparent or opaque.

As for your brother, if I recall properly, the LCD screen on the sedan is directly exposed, while on the LB, there is an angled plastic shield in front of the gauges?
jenaraeThread starterAnaheim · Sep 21, 2007#3
Originally Posted by eTiMaGo ↑
hmmm it may be static, acter all, these LCDs work by using electricity to turn them transparent or opaque.

As for your brother, if I recall properly, the LCD screen on the sedan is directly exposed, while on the LB, there is an angled plastic shield in front of the gauges?

Finally someone responded!🙇lol
And no i have the shield too! Just like the LB...that's why i was like wtf? Did it go through the plastic? lol
eTiMaGoBangkok, Thailand · Sep 21, 2007#4
now that's just plain weird, I doubt a glove could generate that much static, unless you were really giving your dash a vigorous rub...

I guess, next time you use that glove, be sure to check the display, if it does it again, it's gotta be linked somehow...
slvryarisIndiana · Sep 21, 2007#5
Is that LCD??? Its bleeding from all sides so I doubt you might have accidentally pressed too hard, but ya that is weird.
CrandallNo Funswick · Sep 21, 2007#6
You need some gas!

On that note if you're friend put too much pressure on the lcd that would also cause it to bleed. I've seen people do it to laptops and computers all to much, they'll go to point at something at the screen and poke it and then it'll mess up.
eTiMaGoBangkok, Thailand · Sep 21, 2007#7
Yeah but that's the thing, guys, go look in your car, you can't press directly on the LCD, there is a plastic window thing in the front of the gauges blocking access...
CrandallNo Funswick · Sep 21, 2007#8
Doesn't make sense how it would happen to me then. Generally any type of static shock near direct or near direct contact to short anything. Regardless it should be under warranty, see if they're raplce the entire cluster for one with a tach :P
xedNC USA · Sep 21, 2007#9
I'm so confused! What do you guys think caused this? The microfiber? Static electricity from it? Even though there is the plastic covering to protect the speedometer and what not...
I vote static. You used the glove to wipe the dash which built up a large static charge. Some of that charge got transferred to the plastic cover which sits in front of the LCD. The static charge on the plastic cover generates an electric field and that field interacted with your LCD which made it discolor. Over time the charge on the plastic cover dissipates naturally which meant that your LCD returned to normal.

That's my guess.
eTiMaGoBangkok, Thailand · Sep 21, 2007#10
that is a possibility, I guess

*goes off to vigorously rub his cluster panel*
YamilRSan Diego, CA · Sep 21, 2007#11
Thats why I use Swiffer to wipe the dust of the dash
aca72Santa Clara, CA · Sep 21, 2007#12
Microfiber fabric is best for underwear, like microfiber seamless thong! 😁

I'm glad your LCD display is back to normal and thanks for the heads up about those cleaning stuff.
sherryberryIllinois · Sep 21, 2007#13
I usually use microfiber cloth for waxing and putting on rain-x.. i've yet to use it on the inside.
jenaraeThread starterAnaheim · Sep 21, 2007#14
Yeah, I didn't press hard or anything! I didn't even wipe the plastic shield thing just the actual dash in front of the speedometer. It's just odd because my brother uses the same thing in his LB...so unless the LCD's are made differently in the sedan than the LB that's all i can think of...and I'm scared to test it again in case this time it does not go back to normal!
cdmyarisCalifornia, SoCal · Sep 21, 2007#15
wtf. I use my mircofiber towel to wipe anything on my dashboard. Never to this problem before.
jenaraeThread starterAnaheim · Sep 21, 2007#16
Originally Posted by cdmyaris ↑
wtf. I use my mircofiber towel to wipe anything on my dashboard. Never to this problem before.

SEE WHAT I MEAN!? What's wrong with my car? Fix it. 🙁
sherryberryIllinois · Sep 21, 2007#17
ya just send it my way.. and um.. i'll "fix" it.
jenaraeThread starterAnaheim · Sep 22, 2007#18
Originally Posted by sherryberry ↑
ya just send it my way.. and um.. i'll "fix" it.

k, give me your address. 🙄
cdmyarisCalifornia, SoCal · Sep 22, 2007#19
just take it in dealer and lie to them. That it just happened for no reason.
tiksmanAtlanta · Sep 22, 2007#20
I have the same identical glove . I have never had that problem at all.
jdiumHillsboro · Sep 22, 2007#21
There was someone on here that had his gauge replaced because it was "bleeding" on hot days...can't find the post through search for some reason...
Yaris OmegaThe Ark "Wake Me When You Need Me" · Sep 23, 2007#22
thats just weird maybe your car is just haunted no just joking
RazrChiangmai, Thailand · Sep 24, 2007#23
The other thing than can make monochrome LCD's bleed like that is heat.. Maybe a longshot, but worth mentioning.
Benggolf2Richmond, B.C., Canada · Nov 7, 2008#25
I use microfiber towel to wipe off my dashboard all the time and that never happened to me. 😎
nsmitchellRichmond, VA · Nov 7, 2008#26
WOW! This is an old thread!

A Little squirt of water on the microfiber would help the static issue as well.
marcustoronto, canada · Nov 7, 2008#27
i think ur friend jsut pressed it too hard...
YAR1SRaleigh, NC · Nov 7, 2008#28
i use microfiber because unlike cotton rags it doesnt leave little "fuzzies" befhind, which by the way bug the shit out me.
Red HorseCosta mesa, California · Nov 7, 2008#29
maybe there a magnet around.
ChupacabraCT · Nov 22, 2008#30
I have detailed hundreds of cars and I have never seen this. All I use is microfiber...I honestly believe that this was/is a coincidence.
CB900F2Toronto · Nov 23, 2008#31
I had the same thing happen to me... Used a micro fibber towel and then noticed the bleeding in the LCD panel... Mine was not as bad as yours.

Happened on the Friday night, by Sunday morning, the display was back to normal...

How is your now? did you notice if the bleeding is receding?

Originally Posted by jenarae ↑
OK, so today I went out to Pep Boys to buy a Microfiber glove since my bro got one and said it works very well, so i decided to get one...

Picture not included in this copy

I get back in my car with my friend and decide to test it out on my semi-dusty dash. It worked just as planned. 👍 As I'm leaning over my friend to put it away in my glove box, my friend notices something weird going on with the clock display thing. I look up and i see this:

Picture not included in this copy

WTF!!???!? The display was like bleeding or something!? I was so upset! I couldn't come up with any other explanation other than the micro fiber glove and maybe some sort of static electricity messing with the display. My friend said she heard static when i was wiping away.

As I'm driving away and calling my dealer to see if i can take it in tomorrow morning to get this taken care of i notice that the globs of bleeding are disappearing and it's going back to normal. Eventually the display looks normal again and there are no globs of crystal or whatever that stuff is made of.

I'm so confused! What do you guys think caused this? The microfiber? Static electricity from it? Even though there is the plastic covering to protect the speedometer and what not...

My brother uses the same one and this has not happened to him and the packaging of the glove has no warning of any type. I want to throw out that glove now, but i don't really know if it was the cause or it was just coincidence? 🤷 A little help guys...