eTiMaGoOriginal postBangkok, Thailand · Sep 20, 2007#1In preparation for the long awaited 3rd GB, I'm looking into some more cool stuff.
EXHAUSTS
There's a very reputable exhaust manufacturer here who has a few goodies for our cars:
Complete headerback exhaust (including high flow cat) for Yaris and Vios (aka sedan)
and axleback exhausts for Yaris and Vios (i.e. the same type as all the other ones on the market)
The headerback for Yaris would be roughly $260 and for Vios $270
The axlebacks I will get a price confirmation tomorrow, but it should not be more than $150. I'll also know the exact pipe diameter then.
The style of the exhaust is the long canister kind:
Picture not included in this copy
REAR DISC BRAKE CONVERSION KIT
This is supposed to be a complete bolt-on upgrade kit, i.e. no modification of your existing car is required. It comes with 240mm (9.4") discs and 2-pot calipers. But, it's quite pricey, we're looking at roughly $880 for the kit.
So, what I need to know now, any more information you would like me to find out, and who would be seriously interested in any of these?
Replies 58
blueskanaSan Antonio, TX · Sep 20, 2007#2Header-back for absolutly sure.
Disc conversion, depending on when you need the $ by (aka; how long I have to save/beg/borrow/steal/etc).
#1
eTiMaGoThread starterBangkok, Thailand · Sep 20, 2007#3well basically the GB would run as before, a couple of weeks to place order, a week to pay for them until I order the stuff, so basically you'd have until mid to end of october.
slvryarisIndiana · Sep 20, 2007#4Wish I had a pipe bender I would make exhausts for this baby. It upsets me to see how many people and companies suffer due to lack of products that are in demand. If I had the resources I would be all over building these. I guess thats why I majored in Business.
death is my giftdallas · Sep 20, 2007#5After my ICE I'm getting a new exhaust. I love the way my car looks on the outside EXCEPT for that stock pipe sticking out the back. Yuck! It's all wimpy and stupid looking.
Is the stock muffler/exhaust welded or bolted on? Can I remove it myself?
RShatchbackNY · Sep 20, 2007#6I'd like to see some more info on that header back...
bladesmith6PA · Sep 20, 2007#7Death,
it depends on what you want to take off. The muffler and tailpipe have a bolt on joint right at the rear axle, all you need is the right wrench or socket and pull the hangers out of the rubber connectors, it's off. The rest is just bolted to the stock exhaust manifold but it's a long piece to get out, might be a little tricky I haven't looked that hard. I'm not replacing anything until I'm ready to do the whole deal, header, cat(maybe, stock one might be okay) and the exhaust all the way back. I like the idea of the headerback unit but I kind of wanted a magnaflow or a flowmaster muffler. decisions,decisions!
yrsdrgnSF,CA · Sep 20, 2007#8i'd like to know a bit more about the exhaust. maybe does it come with a silencer and how high is the db rating on it ^^ thanks
kurokoma-kunmy own little world · Sep 20, 2007#9Re headerback: can i replace cat and still pass emissions/inspection?
bladesmith6PA · Sep 20, 2007#10I think it depends on your state, you are never supposed to replace the cat unless it is defective(according to the law), but some states don't do a visual inspection of your car as long as it passes the sniffer test or like certain places in PA if your car is new enough and you don't have a check engine light you're good to go.
thebarberGrand Rapids, MI · Sep 20, 2007#11im interested in a mandrel bent, stainless steel header-back exhaust...
redduckPittsburgh · Sep 20, 2007#12If it will pass emissions I am in on the exhaust. also will this be available after the group buy? there is so much stuff popping up at once and mainly for GBs its almost impossible to do it all so if its possible to buy this stuff later that would be great. I am excited about the rear disc conversion.
Kaotic LazagnaCentral Valley, CA · Sep 20, 2007#13just interested, would that catalytic converter be able to pass emission here in Cali? i'm pretty sure that Thailand has lower standards than Cali (like everyone else). i may be interested in the axle-back for the Vios, but i don't think a canister type will look right on it...
slvryarisIndiana · Sep 20, 2007#14I wouldnt think the 1.5 would give off that bad of an emissions test stock. Or is the tests hardcore now? Just move to Indiana we dont even have them :)
JerkrattFair Lawn, NJ · Sep 20, 2007#15find out the specs on the headerback emistions n uch....maybe some installed pics
CrandallNo Funswick · Sep 20, 2007#16That's a good price for a and exhaust! I would fore sure be interested.
Kaotic LazagnaCentral Valley, CA · Sep 20, 2007#17 Originally Posted by
slvryaris ↑ I wouldnt think the 1.5 would give off that bad of an emissions test stock. Or is the tests hardcore now? Just move to Indiana we dont even have them :)
i just know that Cali is pretty harsh. shoot, when i had my GTI, it didn't pass because i didn't have the stock air box in.
pp.sweetSunny,Florida · Sep 20, 2007#18eTiMaGo..what about the other stuff..body kits,side skirts..which I'm really thinking about now.Headlights,JDM rear lights,wheels..etc
Well like whats on the menu .. 😉
cleongSingapore · Sep 20, 2007#19How 'bout that rear disc? Is that off the RS Spec Yaris, or made by the aftermarket?
eTiMaGoThread starterBangkok, Thailand · Sep 20, 2007#20OK, we'll be finding out more information today, pipe diameter and so on, pictures and video if possible. We'll also find out if it's possible to get just the midpipe on its own.
As for the catalyzer, I'm quite sure it will be functional, but honestly, no idea if it will pass CA emissions, but I would imagine no.
cleong, the rear discs are aftermarket, from what I understand, swapping for the OEM S/RS discs is a big undertaking that basically requires changing the complete torsion bar too.
pp.sweet, yes, all those things, and a few others, will be on the menu 😉
Kaotic LazagnaCentral Valley, CA · Sep 20, 2007#21how about a Vios grill, Thomas?
eTiMaGoThread starterBangkok, Thailand · Sep 20, 2007#22that might be one of the few other things on the menu 😁
pp.sweetSunny,Florida · Sep 20, 2007#23eTiMaGo..great..watching and waiting..thank you
cm07yarisAppleton, WI · Sep 21, 2007#24 Originally Posted by
pp.sweet ↑ eTiMaGo..great..watching and waiting..thank you
+1!!!
DMartSouth GA · Sep 21, 2007#25im interested in the exhaust as well...i'll patiently wait for more info...
Kaotic LazagnaCentral Valley, CA · Sep 21, 2007#26 Originally Posted by
eTiMaGo ↑ that might be one of the few other things on the menu 😁
nice, since i'm not sure if the one i'm looking at will go through or not.
blueskanaSan Antonio, TX · Sep 21, 2007#27Any info on pipe diameter, cat/midpipe, muffler db specs yet? Sorry... just sitting here waiting with bated breath.... (pant, pant, pant...)....
😁
eTiMaGoThread starterBangkok, Thailand · Sep 21, 2007#28All right boys and girls, a bit more information...
The Exhaust:
Picture not included in this copy
The design is the same as the HKS one as I am using. The manufacturer says it is quite loud, but not as loud as the actual HKS one.
The Midpipe:
The OEM midpipe is one long piece but these guys split it into two sections, which is far more manageable...
Picture not included in this copy
Specifications are 1.6" stainless steel tubing, i.e. slightly bigger than stock, so you won't lose much low end torque. The catalysers are rated for a higher flow, but they cannot confirm they will be CARB legal, there's just, well, no such thing here... I'm not 100% sure if they are mandrel bent, can anyone tell from the picture? The bends do look smooth and even, with no crumpling.
The Header:
They also have a 4-1 header, no pictures of it, but it'll look just like any other 4-1 header for these cars 😁 They quoted a really good price, but I'm not sure it it includes a new gasket, mounting bolts, etc, still, I should be able to sell it not more than $150.
Other Stuff
Depending on the outcome of this group buy, we may very well end up official US distributors of Nitto products... They have a few more interesting items:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
The front and rear strut bars should be less than $100 each, and the bottom one about $150. I'm not sure, though, if the bottom bar can be used in conjunction with any rear sway bar.
If you look in the engine bay pic, there is also a torque damper in there:
Picture not included in this copy, which will go for roughly $150
Remember, the prices I put above and in the first post do not include shipping costs, due to the size of the items it probably won't be so cheap, but group shipping will help a lot!
I will probably get their midpipe myself soon, since I still didn't get my mangled one fixed 😳
03Z33SoCal · Sep 21, 2007#29Count me in on the lower rear torsion/sway bar. I'm also interested in the rear disc conversion... any pics?
blueskanaSan Antonio, TX · Sep 21, 2007#30Mmmmm.... higher flow cats... +DC and I'm good to go.
eTiMaGoThread starterBangkok, Thailand · Sep 21, 2007#31I'll have more information on the disc conversion next week, trying to get a peek at the instructions to see what level of skill is required, and most importantly to make sure it works on USDM cars!!! But AFAIK there is no difference in the suspension/brake setup back there, so we should be good to go 🙂
03Z33SoCal · Sep 21, 2007#32 Originally Posted by
eTiMaGo ↑ I'll have more information on the disc conversion next week, trying to get a peek at the instructions to see what level of skill is required, and most importantly to make sure it works on USDM cars!!! But AFAIK there is no difference in the suspension/brake setup back there, so we should be good to go 🙂
Sounds good, looking forward to it! 👍
Kaotic LazagnaCentral Valley, CA · Sep 21, 2007#33those look mandrel bent to me. but yes, i would like to hear how it sounds like first.
AstromanWenatchee, WA · Sep 21, 2007#34I am interested in the rear brake conversion, but don't have any money. 😢
RShatchbackNY · Sep 21, 2007#35I like what I see with that midpipe, There shouldnt be any difference with exhaust components compared to usdm models right? Does anyone know,
And The midpipe should work or "connect" to other axle back exhausts in the same location right - you dont HAVE to have their rear section, cause I'd like to keep my greddy.
Also like to see some shipping quotes!
LafiroNYC · Sep 21, 2007#36Rear disc conversion sounds good, need pictures though, and inforation on how this changes ABS.
03Z33SoCal · Sep 22, 2007#37I'd also buy the exhaust if they can sell just the center sections without the axle back portion? Any chance they can make a downpipe without any cats or resonators for track use? Just straight piping like the second section but bolt in...
Thanks!
Black YarisToledo, OH · Sep 22, 2007#38 Originally Posted by
RShatchback ↑ I like what I see with that midpipe, There shouldnt be any difference with exhaust components compared to usdm models right? Does anyone know,
And The midpipe should work or "connect" to other axle back exhausts in the same location right - you dont HAVE to have their rear section, cause I'd like to keep my greddy.
Also like to see some shipping quotes!
Originally Posted by
03Z33 ↑ I'd also buy the exhaust if they can sell just the center sections without the axle back portion? Any chance they can make a downpipe without any cats or resonators for track use? Just straight piping like the second section but bolt in...
Thanks!
my guess is they opened up the diamter of the pipe, so your axle backs will be useless, and they would choke it down anyway if they did mount up... but hey I have been saying axlebacks are a waste of money since day 1.... but what do I know
JerkrattFair Lawn, NJ · Sep 22, 2007#39....arent our axle backs slightly larger diam then stock?.... so if anything the end flange would have to be choped off and refit another one.. very ez task for a muffler shop
RShatchbackNY · Sep 22, 2007#40 Originally Posted by
Jerkratt ↑ ....arent our axle backs slightly larger diam then stock?.... so if anything the end flange would have to be choped off and refit another one.. very ez task for a muffler shop
+1, seems it would be pretty easy to change a flange and connect the axleback, either way I doubt that you would notice a significant difference - Axle back would be a waste if cat back was a possiblility - or exhaust shops around here could make up custom setups that didnt look like pep boy's doo doo specials. And imo square mufflers like flowmaster and such are out of place on such a car. - so I'll stick with My Ti-C axleback...
But I'm still waiting for more info on the midpipe...👍
Yaris OmegaThe Ark "Wake Me When You Need Me" · Sep 23, 2007#41finally some good stuff for the yaris it feels like the ugly ass fit is getting all the love wheres the love for the yaris, the yaris is way better than the fit anyways that brake conversion is swwweeeeettttttttt PEACE
vacantjSo Cal · Sep 23, 2007#42I be interested in the rear disc conversion kit..
KioshiFremont, CA · Sep 24, 2007#43If that hi flow exhaust can give a boost in hp and open it up a little more than the Tanabe and TRD.....then count me in for the GB..
thebarberGrand Rapids, MI · Sep 24, 2007#44are those both midpipes for the hatchback? does anyone have a pic of the underside of a yaris to see if itll fit. id like to know that the exhaust hangers and o2 sensor locations are the same....
Picture not included in this copy
Kaotic LazagnaCentral Valley, CA · Sep 26, 2007#45just curious, does anyone have a sound/video clip of the exhaust system?
RShatchbackNY · Sep 26, 2007#46 Originally Posted by
Kaotic Lazagna ↑ just curious, does anyone have a sound/video clip of the exhaust system?
In the For sale "group buy 3" Etimago said that he was going to have it in a few days and he would get pictures and clips. I think you'll have to wait until then...
RagnaCaTVillalba, Puerto Rico · Sep 26, 2007#47I'll be intrested in the sway bars and depending the price Rear Discs! Catback? Depends how loud although cops bother when they feel like bothering in Puerto Rico.
eTiMaGoThread starterBangkok, Thailand · Sep 26, 2007#48yeah had a bit of a delay in getting my own one, it sucks when people are sick and you gotta cover their work 😁
Kaotic LazagnaCentral Valley, CA · Sep 26, 2007#49oh, okay. no problem with me. i can wait.
LafiroNYC · Sep 26, 2007#50I cant, need pics/price for rear disc's!!!!!