Yarisworld Archive

Speed signal wire

13 posts · 13,273 views

drecianOriginal postSouth Australia · Sep 17, 2007#1
Anyone know which wire leading to the OBDII connector/port is the speed signal wire?

Cheers

Replies 12

joey1320Lakewood, Ohio · Sep 17, 2007#2
you mean car speed or engine speed?

if you are looking for vehicle speed the only one i was able to find was the signal to the speedometer, heres the link for the repair manual, is on pages 226 and 227.

http://www.etimago.com/yaris/repairmanual/EWD.pdf


and heres the pic for the tach/engine speed.

Attached picture not available
project yiowa · Sep 17, 2007#3
trying to bypass the speed cutout?
drecianThread starterSouth Australia · Sep 17, 2007#4
Originally Posted by project y ↑
trying to bypass the speed cutout?
Heh not really. I have an APEXi Rev/Speed meter that I've currently got hooked up to display revs and g-forces (front/back and lateral), and was just thought if it was easy enough I may as well give it a speed input so I can record and replay laps at the track...
gonzo452001French Lick,IN · Sep 18, 2007#5
this will tell you where the vss wire ishttp://www.thecruisecontrolstore.com/newyarisinst.pdf
lunjiaowPerth, Australia. · Feb 3, 2009#6
i just got an RSM. Hooked it up, but the RSM isn't getting any signal. Spliced into PIN 26 (Purple) which is supposed to be the VSS. Can anyone confirm if its the right wire? Maybe i have to change settings on the RSM itself.
lunjiaowPerth, Australia. · Feb 7, 2009#7
Anyway. Had a look into the Manual. Found a working speed sensor wire which connects to the instrument cluster 24pin plug. Its pin 17 (pink).
aucoriumSouth Africa · Sep 8, 2009#8
Originally Posted by lunjiaow ↑
Anyway. Had a look into the Manual. Found a working speed sensor wire which connects to the instrument cluster 24pin plug. Its pin 17 (pink).
where on the OBD2 port connector can i find the speed signal wire ?
KizBrisbane, Australia · Sep 8, 2009#9
Originally Posted by aucorium ↑
where on the OBD2 port connector can i find the speed signal wire ?
It's not on the OBD2 port connector. The OBD interface sends serial data, there aren't individual wires for different sensors. You'll need to get the speed signal from the cluster loom or ECU loom.
aucoriumSouth Africa · Sep 8, 2009#10
ahhh. i thought maybe where i got the Tach wire signal from , there might be a wire i can piggback off. then how does the Scangauge get speed data from the OBD2 port ? must be one of those wires sending speed info ?
KizBrisbane, Australia · Sep 8, 2009#11
Originally Posted by aucorium ↑
then how does the Scangauge get speed data from the OBD2 port ? must be one of those wires sending speed info ?
Originally Posted by Kiz ↑
The OBD interface sends serial data, there aren't individual wires for different sensors. You'll need to get the speed signal from the cluster loom or ECU loom.
😉

As mentioned in lunjiaow's post, he got the speed signal from the pink wire going to the gauge cluster. You'll need to find the wire going to the gauge cluster with the tach signal for your application.

For reference, the common wires in the OBDII connector are simply 2xData, 1xground and 1xpower. The scanguage reads the serial data and processes it for it to display to you.
aucoriumSouth Africa · Sep 9, 2009#12
ahh ok cool !! thanks alot buddy !! appreciate the help ! will have a look for that illusive pink wire , hehe !!
bzinn 1University Place,WA · Jun 14, 2010#13
Hooked up Avic D3 today in 2008HB and the pink wire in the speedo harness,is indeed a god wire to hook to for speed pulse,navi is now learning....hope this confirmation helps other looking for the VSS wire in an easy place.