drknss99Original postVancouver, BC · Sep 13, 2007#1Hi.. I'm new here.. Just posting some pics on a retrofit I did for a member of this board (tca4).
Projectors: Infinity FX35/45 bi-xenon (textured lens) 🙁
Bulbs: Philips D2S 4300k (85211+)
Ballasts/Igniters: resued from previous h4 hid kit (xetronic)
I used Infinity FX35/45 bi-xenon projectors with some textured/fuzzy lenses. I was hoping to get some clear ones but this was what I got in the mail 🙁. I reused the ballasts and igniters from an existing pnp kit the owner had to save costs. In order to reuse the ballasts from the pnp kit, a pair of amp-d2s adaptors were required. I also made a harness to activate the high beam solonoids as well as to keep the ballasts from turning off when the high beam is engaged. The shrouds are made from 4"-2" pipe reducers I found at Rona.
I didn't get a chance to take any nice beam shots so maybe tca4 can post some in the future. 🙂
Here are the pics!
Before
After
Was aimed kind of low when I took this pic. I reaimed them for tca4 later on.
Lens/Cover taken off
Made opening larger to fit the projector in
M4 stainless screws that directly replaces the existing short ones that hold the bowl to the rest of the projector. These were the longest I could find (7cm)
Test fit
Comparison - left 4300k d2s in fx projector, right 6000k? h4 pnp
Shrouds were cut, sanded(left), and polished(right)

Replies 18
Kaotic LazagnaCentral Valley, CA · Sep 13, 2007#2nice job. you make it look so easy. i want projectors...*sigh*
Kaotic LazagnaCentral Valley, CA · Sep 13, 2007#3oh, and welcome to YarisWorld.
Nexus1155Dorchester · Sep 13, 2007#4wow very nice work and clean too...
yrsdrgnSF,CA · Sep 13, 2007#5How much did that cost him?
Black YarisToledo, OH · Sep 13, 2007#6 Originally Posted by
Kaotic Lazagna ↑ nice job. you make it look so easy. i want projectors...*sigh*
I want that jdm RS front bumper 😁
drknss99Thread starterVancouver, BC · Sep 13, 2007#7 Originally Posted by
Kaotic Lazagna ↑ nice job. you make it look so easy. i want projectors...*sigh*
Thanks! It's not too hard to do but it sure takes a lot of time. This is my first time working on a yaris as well. The shrouds took a long time to do because the only tools I used to trim them was a hack saw and a file. Sanding the chrome off of the reflector was also really difficult due to all the curves and bumps. I'm just glad that everything worked out at the end.
yrsdrgnSF,CA · Sep 14, 2007#8should do some more retrofits on extra headlights and sell them ^^ =P
Kaotic LazagnaCentral Valley, CA · Sep 14, 2007#9really tho.
drknss99Thread starterVancouver, BC · Sep 14, 2007#10 Originally Posted by
yrsdrgn ↑ How much did that cost him?
Parts alone was around US$300. This includes projectors, bulbs, relays, wires, paint, etc.. This would have been more expensive if ballasts/igniters were required.
Kaotic LazagnaCentral Valley, CA · Sep 14, 2007#11no ballast? i thought every HID kit requires a ballast?
Kaotic LazagnaCentral Valley, CA · Sep 14, 2007#12man, i can get a pair of TSX that come complete with bulb holder clips, reflectors, and newdessicant pouches to prevent moisture build-up in the headlight housing for 100 bucks. i was wondering if i can use them with the OEM lights...sorry for the tangent.
drknss99Thread starterVancouver, BC · Sep 14, 2007#13 Originally Posted by
yrsdrgn ↑ should do some more retrofits on extra headlights and sell them ^^ =P
I would, except it takes too much time to do these retrofits. It's also hard to get the rotation correct without having the headlight mounted on the car. Maybe if I had more free time.. 🙂
drknss99Thread starterVancouver, BC · Sep 14, 2007#14 Originally Posted by
Kaotic Lazagna ↑ no ballast? i thought every HID kit requires a ballast?
The owner already had a ballast and igniter from a pnp kit. But yes, all hids require a ballast and igniter(some built into the ballast).
Kaotic LazagnaCentral Valley, CA · Sep 14, 2007#15oh, heh, okay.
drknss99Thread starterVancouver, BC · Sep 14, 2007#16 Originally Posted by
Kaotic Lazagna ↑ man, i can get a pair of TSX that come complete with bulb holder clips, reflectors, and newdessicant pouches to prevent moisture build-up in the headlight housing for 100 bucks. i was wondering if i can use them with the OEM lights...sorry for the tangent.
That's a pretty good deal.. The yaris headlights are pretty big.. I'm sure you can fit tsx projectors in. I chose the FX projectors because they're easy to work with and have high beams unlike the TSX. If the yaris had a seperate high beam reflector I would have chosen some TSXs or some other projector.
I just recalculated the prices..
Online parts - (Prices in US) FX Projector - $70 (shipping $30)
Philips D2S 4300k - $65 (shipping $10)
H4 to D2S adaptor - $30 (shipping $15)
Duties/Taxes/Brokerage Fees = i forogt..
Online Parts Total = US$220 Other Parts (Prices in Canadian) H4 socket (female) - $3.99 x2 = $7.98
Male Disconnects - $1.70
Relay 30AMP - $5.89 x2 = $11.78
Ring Terminals - $1.69
Wire - $4.69
M4 nylock nuts - $0.22 x16 = $3.52
Relay Socket - $2.00 x2 = $4.00
M4 stainless screws - $0.75 x8 = $6.00
ABS Reducing Coulping 4-2" - $5.89x2 = $11.78
Rubber Washers - $0.95 x4 = $3.80
Krylon Primer - $4.49
Krylon Fusion Paint (gloss blk) - $6.99
PST = $4.79
GST = $4.10
Parts Total = CAD$77.30
Parts Total = US$73.62
Parts Total - US$220 + US$73.62 =
US$293.62 reznuntSocal · Sep 14, 2007#17 Originally Posted by
Black Yaris ↑ I want that jdm RS front bumper 😁
i was thinking the same thing.
Kaotic LazagnaCentral Valley, CA · Sep 14, 2007#18 Originally Posted by
drknss99 ↑ That's a pretty good deal.. The yaris headlights are pretty big.. I'm sure you can fit tsx projectors in. I chose the FX projectors because they're easy to work with and have high beams unlike the TSX. If the yaris had a seperate high beam reflector I would have chosen some TSXs or some other projector.
I just recalculated the prices..
Online parts - (Prices in US)
FX Projector - $70 (shipping $30)
Philips D2S 4300k - $65 (shipping $10)
H4 to D2S adaptor - $30 (shipping $15)
Duties/Taxes/Brokerage Fees = i forogt..
Online Parts Total = US$220
Other Parts (Prices in Canadian)
H4 socket (female) - $3.99 x2 = $7.98
Male Disconnects - $1.70
Relay 30AMP - $5.89 x2 = $11.78
Ring Terminals - $1.69
Wire - $4.69
M4 nylock nuts - $0.22 x16 = $3.52
Relay Socket - $2.00 x2 = $4.00
M4 stainless screws - $0.75 x8 = $6.00
ABS Reducing Coulping 4-2" - $5.89x2 = $11.78
Rubber Washers - $0.95 x4 = $3.80
Krylon Primer - $4.49
Krylon Fusion Paint (gloss blk) - $6.99
PST = $4.79
GST = $4.10
Parts Total = CAD$77.30
Parts Total = US$73.62
Parts Total - US$220 + US$73.62 = US$293.62
dang! but then again, that's with the HID kit (right?) and the mounting hardware with paint.
drknss99Thread starterVancouver, BC · Sep 14, 2007#19The owner already had the ballasts and igniter so the price I've listed includes only the projectors, bulbs, wiring adaptor, custom wiring harness, and paint.