cali yarisOriginal postCanoga Park, CA · Aug 22, 2007#1OK, I called and spoke to Todd the owner.
The "kit" you see on the website is the parts shown only, it's not a complete kit. That is because it was never installed in their Yaris. He got to a certain point, then did a 2ZZ celica motor swap instead. (This is the red Yaris shown on the site).
So, there are no more pictures, no installed pics, no dynos, etc. Todd was very nice and honest on the phone about all this information. It is also missing intercooler piping.
As for injectors, he suggested stock tC or RC 440cc for the Yaris 1.5L, but they don't come with the "kit".
As for management, he agreed with the current consensus that you have to "fool" the ECU with any piggyback system (by unplugging O2 sensor, for example), or go standalone (expensive).
OK, so that's where we stand with that one.
Why Industries, llc
PO Box 50281
Mesa, AZ 85208
Ph. 480-254-1865
Fax 480-380-6949
Replies 23
staticorexcivilwar town. · Aug 22, 2007#2👏 Thanks.
cali yarisThread starterCanoga Park, CA · Aug 22, 2007#3this one: (looks red to me?):
Picture not included in this copy
reznuntSocal · Aug 22, 2007#4that looks so sick. i think the sedans are ugly... but this one makes me want to trade in my lb.
RShatchbackNY · Aug 22, 2007#5 Originally Posted by
reznunt ↑ that looks so sick. i think the sedans are ugly... but this one makes me want to trade in my lb.
Its not bad looking - but it would take an act of god to get me to trade my LB for a sedan..
cm07yarisAppleton, WI · Aug 22, 2007#6 Originally Posted by
RShatchback ↑ Its not bad looking - but it would take an act of god to get me to trade my LB for a sedan..
+1
cdmyarisCalifornia, SoCal · Aug 23, 2007#7damn that seden looks sick...
btw thats good info on turbo...
NutzoidsPhiladelphia · Aug 23, 2007#8 Originally Posted by
RShatchback ↑ Its not bad looking - but it would take an act of God to get me to trade my LB for a sedan..
+2
😈
JerkrattFair Lawn, NJ · Aug 23, 2007#9i think the red one was in SEMA?
Turbo&Autohome · Aug 23, 2007#10440cc injectors, quite overkill!! Some XRS 330's would be fine.
Vic-2NZFEPanama · Aug 23, 2007#11that sedan is sitting very low 🤤
Looks very nice.
jetaimejscBville, TN · Aug 23, 2007#12WOW, THAT SEDAN LOOKS AWESOME
whooppee777Maryland · Aug 23, 2007#13how much longer do i have to wait for a standalone ecu? not worried about the cost i just dont wanna turbo my yaris and not do it the way it should be done.
lifthard1alabama · Aug 23, 2007#14 Originally Posted by
whooppee777 ↑ how much longer do i have to wait for a standalone ecu? not worried about the cost i just dont wanna turbo my yaris and not do it the way it should be done.
Talk to Andrew at Hydra he might give you some insight on a standalone
TrishSouth Shore · Aug 23, 2007#15I want my sedan looks like this one!!! Ohhh god....I want a turbo so much....but it's expensive...how many psi his turbo kit is running?
Biggie™Miller Motorsports Park · Aug 23, 2007#16 Originally Posted by
whooppee777 ↑ how much longer do i have to wait for a standalone ecu? not worried about the cost i just dont wanna turbo my yaris and not do it the way it should be done.
I guess you are going to wait forever since there are already a TON of standalones on the market.
But if you are series about it, get a Motec. An M4 can run individual coils and injectors, VVTi, control boost, water or alcohol injection, NOS, launch control, anti lag, flat foot shifting, intercooler sprayer, cooling fans, etc... I love mine and would highly recommend!
cali yarisThread starterCanoga Park, CA · Aug 23, 2007#17MoTec FTW, that's what I have on my tC.
AEM makes a good standalone, and there are a couple of shops around here that do installations and tuning.
Here is the IMPORTANT thing -- choose a shop FIRST and choose them WISELY. They will be managing your project, and they will probably have a preference and/or comfort level with a particular system (motec, aem, etc.).
That's the best advice I can give after going through three shops with my tC and taking nearly eight months to get the car set up and tuned properly. Whew.
ChinoCharlesOH · Aug 23, 2007#18 Originally Posted by
cali yaris ↑ Here is the IMPORTANT thing -- choose a shop FIRST and choose them WISELY. They will be managing your project, and they will probably have a preference and/or comfort level with a particular system (motec, aem, etc.).
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
JosephDocCA, USA · Sep 20, 2007#19Picture not included in this copy
I believe my eyes touched this car in SEMA 06. Love that Jap tunami tatoo outside, and I agree USDM Belta is ugly. 🙄
TurboNut33Arizona · Sep 23, 2007#20I'll be darned....I live 40 miles away from WHY industries.
TurboNut33Arizona · Sep 23, 2007#21I talked to Zack from this website, and he said a guy is tuning the WHY type turbokit at Titan in Florida, and I think he is using an AEM fic. I'll post updates as soon as I get updates from him.
http://www.365motorwerks.com/motorwerksinfo.html punchBarrie, ontario · Sep 24, 2007#22 Originally Posted by
cali yaris ↑ OK, I called and spoke to Todd the owner.
did i just read elsewhere that the guys from speakermans install (what was that company again?) is partners with this company...
cali yarisThread starterCanoga Park, CA · Sep 24, 2007#23dunno about partners!
I'm not familiar with the AEM fic, but I know a lot of people are talking about it.
How will the AEM fic differ from a piggyback like the eManage? In other words, why won't the ECU "know" what's happening with that unit and compensate as it does with piggyback products?
smokinyarisSoCal · Sep 25, 2007#24thats the yaris from my boys @street image