where can I get a full cat-back exhaust for the hatchback/liftback?
Full Cat-Back Exhaust?
17 posts · 6,826 views
Replies 16
You can't cause it only unbolts at the rear axle and the header.
isn't the Greddy Ti-C a catback?
TOY YARIS 2006-ON 50mm, rear section only cat-back HB 10117902 355.00
ahhh, no idea?
well I copied that from the Greddy website, so I would say their exhaust is catback.
oo, I wonder if it's any good - anyone have it?
I have the greddy - its axle back only. Notice how the part description says "rear section only"
Like said above - after the axle back section is removed, the exhaust is basically one long peice all the way up to the front...
I noticed you looking at the tanabe exhausts and the TRD in other threads. If thats the style that you want - you wont like the greddy, its pretty big - extremely noticable and although it sounds very good - its no where near as quiet as those other exhausts.
Like said above - after the axle back section is removed, the exhaust is basically one long peice all the way up to the front...
I noticed you looking at the tanabe exhausts and the TRD in other threads. If thats the style that you want - you wont like the greddy, its pretty big - extremely noticable and although it sounds very good - its no where near as quiet as those other exhausts.
ahh, I stand corrected. Well, sit actually. I have the Tanabe Medallion Touring, and I love it. I will probably get the exhaust guy to change the mid-pipe for me next -- good to know there is some welding involved.
Thanks RShatchback.
Thanks RShatchback.
ahh i c, unless I turn the axle back and extend it to a cat back? get it customized?
I think that would be your best bet because the axle back section has a good muffler with good welds and the hangars are properly positioned. Basically less prone to becoming a butcher job.
I think I would ask to have flanges put on a few inches after the catalytic converter and save your factory exhaust system. This way you will have a full cat-back that can be removed and swapped out when Officer Swine gives you a ticket or other reasons. 👍
I think I would ask to have flanges put on a few inches after the catalytic converter and save your factory exhaust system. This way you will have a full cat-back that can be removed and swapped out when Officer Swine gives you a ticket or other reasons. 👍
Originally Posted by Nabisco ↑I think that would be your best bet because the axle back section has a good muffler with good welds and the hangars are properly positioned. Basically less prone to becoming a butcher job.
I think I would ask to have flanges put on a few inches after the catalytic converter and save your factory exhaust system. This way you will have a full cat-back that can be removed and swapped out when Officer Swine gives you a ticket or other reasons. 👍
oOooo yah true, Iunoo if there that anal here in canada about loud exhaust - cause my bro's exhaust is pretty loud as well - you can hear his from down the block - lol
ill be waiting for catback, which as most dont know, you usually have to cut and weld to your stock exhaust behind the cat....
otherwise, i might go custom...
otherwise, i might go custom...
I have owned several different makes and models of cars, and installed dozens of cat-backs on friends cars..civics,tiburon,jettas,eclipses.etc...lots... My brother and I do installs for a local performance shop from time to time...Originally Posted by thebarber ↑ill be waiting for catback, which as most dont know, you usually have to cut and weld to your stock exhaust behind the cat....
otherwise, i might go custom...
I have never...ever yet had to cut or weld anything to install a purchased cat back exhaust on any of those cars...
Cat-back on the Scion tC is bolt-on.
touche then
my matrix was cut and welded
either way, ill be going header-back eventually anyways, and not wasting money on an axleback
my matrix was cut and welded
either way, ill be going header-back eventually anyways, and not wasting money on an axleback
yep, that's the way to do it!!
i don't think anyone is gonna come out with a catback for our cars. i might have just my center pipe made and keep my trd muffler....