Yarisworld Archive

Only with bolt ons

4 posts · 8,140 views

GustavoPROriginal postPuerto Rico · Oct 6, 2026#1
And that’s with the factory cat. The high-flow one is coming soon.

3 attachments not included in this copy

Replies 3

GustavoPRThread starterPuerto Rico · Oct 6, 2026#2
I forgot to mention that that was the result after the reflash.
Neinris‘Murica! · Oct 7, 2026#3
If you don't do the reflash, would cold starts have high rev similar to changing the throttle body with one from the 1ZZ?
GustavoPRThread starterPuerto Rico · Oct 10, 2026#4
Originally Posted by Neinris ↑
If you don't do the reflash, would cold starts have high rev similar to changing the throttle body with one from the 1ZZ?
A reflash won't change your cold-start idle speed; you need to adjust the Allen-head screw on the throttle body—the one with the locking compound on it—to fix that. I adjusted mine with the A/C on so that when the compressor kicks in, the RPMs don't drop too low and cause the engine to stall or start shaking. Before the adjustment, it would rev to 3,000 RPM or higher on a cold start; after adjusting it, it goes up to between 1,900 and 2,100 RPM, depending on the ambient temperature. I’ve tested this with both the 1ZZ and 2ZR throttle bodies.