I gotta tell you guys. This + Garms +3incher is like... buttsekks.
NST (NonStopTuning) Short Shift Kit Info, Specs, User Data...
193 posts · 99,209 views · page 3 of 4
Replies continued
I have the NST SSK engine bay one, and got the two shifter cable linkage bushings a few months ago. After driving with the engine SSK it didn't feel as firm as it use to, but after putting the shift cable bushings it feels alot firmer again. So yes it does make it feel better. 👍Originally Posted by MGargano ↑I installed both NST SSKs (in cabin and engine bay) and am loving them both! Installation was quick and painless and the feel is amazing. Of course, now I have my sights set on the cage and linkage bushings, but I have to ask: will there be a notable difference in feel and/or performance by installing the cage and linkage bushings?
Excellent. Glad to hear it 😁Originally Posted by ruimond ↑I have the NST SSK engine bay one, and got the two shifter cable linkage bushings a few months ago. After driving with the engine SSK it didn't feel as firm as it use to, but after putting the shift cable bushings it feels alot firmer again. So yes it does make it feel better. 👍
Can't wait to get these goodies for my girl's new '09 Carmine Red liftback. 😁
i have a yaris seddan 2008 and i've read like a warning for the nst ssk engine bay one that says:
NOTE: Toyota sourced linkage from two sources from 2008 on. This shifter kit may not fit some 2008-09 models. If it doesn't fit your car, we recommend the SSK-2 in-cabin short shift kit instead.
it's true? how can i know if it fits or not?
NOTE: Toyota sourced linkage from two sources from 2008 on. This shifter kit may not fit some 2008-09 models. If it doesn't fit your car, we recommend the SSK-2 in-cabin short shift kit instead.
it's true? how can i know if it fits or not?
Well this weekend I installed the engine bay kit and I was only able to get the pin that you guys supply with the kit. I could not get the OEM pin on. Either way I installed it and amazed what a difference it made together with the 3" extension.
I also installed one of the cable bushings(the one that goes on top of the SSK). The problem with the smaller bushing is that I could not remove it from the OEM piece. I tried to pry it out like I did with the other but no luck. It looks like I would have to cut the rubber bushing out to install the new one. I do have an 09' liftback.
I also installed one of the cable bushings(the one that goes on top of the SSK). The problem with the smaller bushing is that I could not remove it from the OEM piece. I tried to pry it out like I did with the other but no luck. It looks like I would have to cut the rubber bushing out to install the new one. I do have an 09' liftback.
You shouldn't have a problem getting it in there. It needs to fit just right (not too tight or too loose). The only way you can figure that out is by trying. 🙂Originally Posted by t0m4s ↑i have a yaris seddan 2008 and i've read like a warning for the nst ssk engine bay one that says:
NOTE: Toyota sourced linkage from two sources from 2008 on. This shifter kit may not fit some 2008-09 models. If it doesn't fit your car, we recommend the SSK-2 in-cabin short shift kit instead.
it's true? how can i know if it fits or not?
so this will work also on the new 2009 model?? (motor bay of course)
So far mine seems to be working good....really good actually.
perfect thx
Hi, im not sure where to ask. I bought SSK 2 and it didnt come with plastic thing removal thing. Is there other ways to take it out?
Both versions of the NST SSK are again in stock and ready for immediate delivery via USPS Priority Mail with Delivery Confirmation...
http://www.nonstoptuning.com/pShiftNST.htm
Come and get 'em!!!
http://www.nonstoptuning.com/pShiftNST.htm
Come and get 'em!!!
dear NST... does the item NSTSSK09 will fit on 1.33 dual VVTi (the new 2009 1.3 engine AKA NR-FE1) ?? thx
if not which item should I get?
if not which item should I get?
Unfortunately we have not tested with this engine. You are welcome to place an order with us (SSK, SSK-2, or both) and return them if they do not fit.Originally Posted by suiller ↑dear NST... does the item NSTSSK09 will fit on 1.33 dual VVTi (the new 2009 1.3 engine AKA NR-FE1) ?? thx
if not which item should I get?
Please feel free to contact us by phone, 281-917-0221 ... or look for me on AIM at the screen name "NSTonAIM" should you wish to chat further.
Thank you 👍
Anyone else?!
uk 1.3 (2sz-fe) for in cabin and short shifter
I'm not sure I follow you on this one...Originally Posted by lammy29 ↑uk 1.3 (2sz-fe) for in cabin and short shifter
just wondering will it fit 2007 1.3 yaris?Originally Posted by NonStopTuning ↑I'm not sure I follow you on this one...
What are the odds of this NST I ordered fitting my 09 3D LB and if it doesn't fit can I send it back to micro-image for the in-cabin version?
i know i needed to mod it to fix onto 1.5 sedan :(
For anyone who may be concerned...
Order an NSK SSK from NonStopTuning for your Yaris, and if for any reason it does not fit, we would be more than happy to authorize a return and offer a full refund. All you would have to do would be to call us up or send us a quick email.
I'm pretty sure MicroImageOnline has a very similar/same policy.
99% of our customers that I am aware of, have had no issues to speak of.
NST FTW 😁
Order an NSK SSK from NonStopTuning for your Yaris, and if for any reason it does not fit, we would be more than happy to authorize a return and offer a full refund. All you would have to do would be to call us up or send us a quick email.
I'm pretty sure MicroImageOnline has a very similar/same policy.
99% of our customers that I am aware of, have had no issues to speak of.
NST FTW 😁
Anyone else?!
So far I've installed the SSKv1, SSKv2 and shifter cable bushings. Along with some Redline MT90 tranny oil and some WD40 here and there, it's the best economy-level setup you can have on the Yaris IMO. Short throws, and almost no effort when shifting gears.
Can't wait to see what other goodies you have in store for us, Mike... NST FTMFW! 🤘
Can't wait to see what other goodies you have in store for us, Mike... NST FTMFW! 🤘
Originally Posted by tk-421 ↑So far I've installed the SSKv1, SSKv2 and shifter cable bushings. Along with some Redline MT90 tranny oil and some WD40 here and there, it's the best economy-level setup you can have on the Yaris IMO. Short throws, and almost no effort when shifting gears.
Can't wait to see what other goodies you have in store for us, Mike... NST FTMFW! 🤘
Glad to hear it sir 👍👍
I'm going to go out on a limb here and actually give the NST SSK a BAD review. I ordered the SSK and shifter cable bushings at the same time (easier to install both at once!). I absolutely LOVE LOVE LOVE the shifter cable bushings. They really tightened up the shifts a whole lot more than I expected.
However, the SSK is a GREAT idea that was poorly implemented. What I mean is that the actual part they send you works perfectly and is pretty easy to install (takes a little elbow grease). The kit does not include a cable relocation plate, though. The cable is at such an angle that it makes installation more difficult, shifting MUCH harder (really takes some umph to get the car into/out of gear), and it seems as if putting the cable at such a dramatic angle would cause damage over time, for it's obviously not meant to bend like that.
I put the shifter in yesterday and after a pretty full day's worth of driving I'm uninstalling it and selling it. I'd love to make a bracket myself, but I'm a college student working an internship and therefore have zero free time. I'm going to try out the TWM in-car shift lever (it makes the shifter shorter height-wise which is something I REALLY want too! - yeah, I know this will mean more difficulty shifting due to leverage reduction, but it CAN'T be worse than it is now) and see how I like it. No offense to NST (you make a good product!), I just feel like a cable relocation bracket is a necessary addition to your kit.
However, the SSK is a GREAT idea that was poorly implemented. What I mean is that the actual part they send you works perfectly and is pretty easy to install (takes a little elbow grease). The kit does not include a cable relocation plate, though. The cable is at such an angle that it makes installation more difficult, shifting MUCH harder (really takes some umph to get the car into/out of gear), and it seems as if putting the cable at such a dramatic angle would cause damage over time, for it's obviously not meant to bend like that.
I put the shifter in yesterday and after a pretty full day's worth of driving I'm uninstalling it and selling it. I'd love to make a bracket myself, but I'm a college student working an internship and therefore have zero free time. I'm going to try out the TWM in-car shift lever (it makes the shifter shorter height-wise which is something I REALLY want too! - yeah, I know this will mean more difficulty shifting due to leverage reduction, but it CAN'T be worse than it is now) and see how I like it. No offense to NST (you make a good product!), I just feel like a cable relocation bracket is a necessary addition to your kit.
I got my SSK on Thursday afternoon and installed it right away, even though I was supposed to leave on a camping trip on Friday morning. I took the risk ;-) I went for the full package ordering all 4 parts, the SSK (both engine bay and cabin parts) and the bushings (2 cable and 4 cage).
First, a word on quality and craftmanship: the parts themselves are beautiful. Perfectly crafted, smooth and shiny, I enjoyed to just hold them in my hand and look at them :-) Second, the fit: perfect!
Mike was very nice and explained to me in an email what all the separate kits were for and pointed me to a detailed DIY. The only hiccup was that I couldn't take off the little plastic cup from the end of the stock shifter the first time I tried, and I panicked a little because it was getting late. On a second try, I pulled harder and it came off. After putting everything back together I took the car out for a test drive and could not believe the difference.
The shifts are short and crisp, I love it! It feels very "high-end" :-)
I cannot imagine myself going back to the stock configuration. Besides, I get to exercise my forearm and triceps ;-)
Thank you Mike and thank you NST.
First, a word on quality and craftmanship: the parts themselves are beautiful. Perfectly crafted, smooth and shiny, I enjoyed to just hold them in my hand and look at them :-) Second, the fit: perfect!
Mike was very nice and explained to me in an email what all the separate kits were for and pointed me to a detailed DIY. The only hiccup was that I couldn't take off the little plastic cup from the end of the stock shifter the first time I tried, and I panicked a little because it was getting late. On a second try, I pulled harder and it came off. After putting everything back together I took the car out for a test drive and could not believe the difference.
The shifts are short and crisp, I love it! It feels very "high-end" :-)
I cannot imagine myself going back to the stock configuration. Besides, I get to exercise my forearm and triceps ;-)
Thank you Mike and thank you NST.
Well, since you're a college student, you should know that you cannot reduce the travel without increasing the force, come on, it's simple physics. No matter where the reduction is, whether in the engine bay or shift lever, you will need MORE force to shift.Originally Posted by nickav21 ↑I'm going to go out on a limb here and actually give the NST SSK a BAD review. I ordered the SSK and shifter cable bushings at the same time (easier to install both at once!). I absolutely LOVE LOVE LOVE the shifter cable bushings. They really tightened up the shifts a whole lot more than I expected.
However, the SSK is a GREAT idea that was poorly implemented. What I mean is that the actual part they send you works perfectly and is pretty easy to install (takes a little elbow grease). The kit does not include a cable relocation plate, though. The cable is at such an angle that it makes installation more difficult, shifting MUCH harder (really takes some umph to get the car into/out of gear), and it seems as if putting the cable at such a dramatic angle would cause damage over time, for it's obviously not meant to bend like that.
I put the shifter in yesterday and after a pretty full day's worth of driving I'm uninstalling it and selling it. I'd love to make a bracket myself, but I'm a college student working an internship and therefore have zero free time. I'm going to try out the TWM in-car shift lever (it makes the shifter shorter height-wise which is something I REALLY want too! - yeah, I know this will mean more difficulty shifting due to leverage reduction, but it CAN'T be worse than it is now) and see how I like it. No offense to NST (you make a good product!), I just feel like a cable relocation bracket is a necessary addition to your kit.
Hello All,
I am really interested in installing this on my Yaris. I am experiencing some squeaking right now with my shifter which I think is a result of an original crunchy shift into second gear. I am hoping that when I lube the parts today that it will resolve the problem, though I have a lot of time left on my warranty in case this does not work.
While I have read that shifting will require more effort with this part, I am worried that it will increase the crunchy shift centralized around second gear. I experience problems shifting from 1-2, 2-1 and somewhat from 3-2. Having driven many manual tranmissions before, if feel that the yaris shifting assembly was very poorly designed...loose and blocky, allowing for too much play in the wrong places...thus allowing for wear. (I am not a mechanic, but I know what shifting gears is supposed to feel like) Has anyone been in the same situation? My hope is that with the installation of this mod, it will reduce the play felt in shifting and thus reduce the "wear and tear". Thoughts??
Perhaps I should just take it in and have them replace? My fear is that they will just say - oh it just needs a lube. My thought on that is that a car with only 27,000kms shouldn't ever present a problem like that to begin with. If it requires a lube, it's indicitave of a greater problem. Thoughts?
Thanks!!
I am really interested in installing this on my Yaris. I am experiencing some squeaking right now with my shifter which I think is a result of an original crunchy shift into second gear. I am hoping that when I lube the parts today that it will resolve the problem, though I have a lot of time left on my warranty in case this does not work.
While I have read that shifting will require more effort with this part, I am worried that it will increase the crunchy shift centralized around second gear. I experience problems shifting from 1-2, 2-1 and somewhat from 3-2. Having driven many manual tranmissions before, if feel that the yaris shifting assembly was very poorly designed...loose and blocky, allowing for too much play in the wrong places...thus allowing for wear. (I am not a mechanic, but I know what shifting gears is supposed to feel like) Has anyone been in the same situation? My hope is that with the installation of this mod, it will reduce the play felt in shifting and thus reduce the "wear and tear". Thoughts??
Perhaps I should just take it in and have them replace? My fear is that they will just say - oh it just needs a lube. My thought on that is that a car with only 27,000kms shouldn't ever present a problem like that to begin with. If it requires a lube, it's indicitave of a greater problem. Thoughts?
Thanks!!
I've driven a lot of manual transmission cars as well, since I lived in Europe before moving to the US 5 years ago, so in my experience, all cars I've seen have a little bit of a "crunch" when shifting from 2nd into 1st gear, unless you move the stick left to right and back a couple of times in neutral (which I hate doing by the way) or shift really slowly and carefully.
Having said that, I didn't notice any issues on my Yaris' stock manual transmission, so I'm guessing your problem is an isolated issue and not a problem plaguing this car. If I were you I'd try doing a visual inspection along the cables and bushings and see if you notice anthing unusual, such as lose screws, cracked plastic, etc.
Having said that, I didn't notice any issues on my Yaris' stock manual transmission, so I'm guessing your problem is an isolated issue and not a problem plaguing this car. If I were you I'd try doing a visual inspection along the cables and bushings and see if you notice anthing unusual, such as lose screws, cracked plastic, etc.
Actually a lot of people are experiencing this with Toyota right now. (not limited to the Yaris) Anywho, I lubed it with silicone lubricant, worked it around and it's squeak free...
I already acknowledged that. I accept that I'm going to face some more energy needed to shift, but that energy should come from the leverage (physics) aspect, not the poor design that puts the shifter cable at a terrible angle (something that could be resolved by raising the cable up an inch along with raising the connection up an inch).Originally Posted by fmicle ↑Well, since you're a college student, you should know that you cannot reduce the travel without increasing the force, come on, it's simple physics. No matter where the reduction is, whether in the engine bay or shift lever, you will need MORE force to shift.
I drove a friend's yaris the other day with the TWM shifter only, and I gotta say, TWM really got it right. Shifts are shorter (and more difficult due to LEVERAGE, not poor connection angles), and I'm not worried about bending my shifter cable out of whack. Not to put down NST, for all the other products I've tried from them (cable bushings, cage bushings) are quite amazing! Enough ranting, it's time for breakfast!
Does anyone know if this will work on a 05 Echo???? Im assuming it will but I have messaged people about it with no response.....
I really don't think the angle is that bad, I checked mine again, after you mentioned it and I don't think it's more than 15 degrees from the stock connection...Originally Posted by nickav21 ↑I already acknowledged that. I accept that I'm going to face some more energy needed to shift, but that energy should come from the leverage (physics) aspect, not the poor design that puts the shifter cable at a terrible angle (something that could be resolved by raising the cable up an inch along with raising the connection up an inch).
I drove a friend's yaris the other day with the TWM shifter only, and I gotta say, TWM really got it right. Shifts are shorter (and more difficult due to LEVERAGE, not poor connection angles), and I'm not worried about bending my shifter cable out of whack. Not to put down NST, for all the other products I've tried from them (cable bushings, cage bushings) are quite amazing! Enough ranting, it's time for breakfast!
Glad you like your NST SSK sir. Thank you for the kind words.Originally Posted by fmicle ↑I really don't think the angle is that bad, I checked mine again, after you mentioned it and I don't think it's more than 15 degrees from the stock connection...
👍👍
Originally Posted by nickav21 ↑I'm going to go out on a limb here and actually give the NST SSK a BAD review. I ordered the SSK and shifter cable bushings at the same time (easier to install both at once!). I absolutely LOVE LOVE LOVE the shifter cable bushings. They really tightened up the shifts a whole lot more than I expected.
However, the SSK is a GREAT idea that was poorly implemented. What I mean is that the actual part they send you works perfectly and is pretty easy to install (takes a little elbow grease). The kit does not include a cable relocation plate, though. The cable is at such an angle that it makes installation more difficult, shifting MUCH harder (really takes some umph to get the car into/out of gear), and it seems as if putting the cable at such a dramatic angle would cause damage over time, for it's obviously not meant to bend like that.
I put the shifter in yesterday and after a pretty full day's worth of driving I'm uninstalling it and selling it. I'd love to make a bracket myself, but I'm a college student working an internship and therefore have zero free time. I'm going to try out the TWM in-car shift lever (it makes the shifter shorter height-wise which is something I REALLY want too! - yeah, I know this will mean more difficulty shifting due to leverage reduction, but it CAN'T be worse than it is now) and see how I like it. No offense to NST (you make a good product!), I just feel like a cable relocation bracket is a necessary addition to your kit.
Hard shifting is a common complaint when installing the metal bushing kits...
But in my case the fix was just as easy as some WD-40 on the bushings and ssk pin...
After some lubrication the gears went in and out like butter..! I was amazed of the change....
You can try the SSk with the OE rubber bushings and you will see that it shouldn't take any extra effort to move in and out of gears.
Regarding the TWM kit... I actually had that kit on my car and change it for the NST kit. I don't recomedn the TWM unless you have Really long and strong arms.
It puts the knob a little to low and hard to reach. Gears with the TWM do take extra effort... at first is funny but it gets tire really quick.
Or get some bucket/sport seats that sit lower, then it's a perfect match 👍Originally Posted by CASTREX ↑Regarding the TWM kit... I actually had that kit on my car and change it for the NST kit. I don't recomedn the TWM unless you have Really long and strong arms.
It puts the knob a little to low and hard to reach. Gears with the TWM do take extra effort... at first is funny but it gets tire really quick.
But really, the NST cable bushings, I didn't think they could really make that much of a difference, but wow... clunk-clunk-clunk smoothly into each gear, I love it!
Or get some bucket/sport seats that sit lower, then it's a perfect matchWe are all not as rich as you sir!, lol j/k =D
Mine was doing this for a while, so I asked about it. Turns out it's just the springs involved with the clutch stuff, and you can fix by lubing.Originally Posted by watersoilair ↑Actually a lot of people are experiencing this with Toyota right now. (not limited to the Yaris) Anywho, I lubed it with silicone lubricant, worked it around and it's squeak free...
Can someone explain to me the differences, pros/cons of the engine bay kit vs. the in cabin kit? I'm new to manual transmissions and shift kits. Thanks,
it should fit if you have the 2NZFE 1300 , i have a NST crank pulley made for the 1,5 on my 1.3 , fits and works 100% next i need the short shifter setup ;-)Originally Posted by lammy29 ↑just wondering will it fit 2007 1.3 yaris?
where does this kit fit ? and how is it different from the other short shift kit ?
http://www.nonstoptuning.com/pShiftNST.htm
??
http://www.nonstoptuning.com/pShiftNST.htm
??
Those of you who may be interested in seeing exactly where the NST SSK and NST SSK-2 are installed, what the differences are, how they work together, etc. should definitely check out the following article...
http://www.subcompactculture.com/200...nst-short.html
Good luck and have fun with all your projects everyone!
👍👍
http://www.subcompactculture.com/200...nst-short.html
Good luck and have fun with all your projects everyone!
👍👍
Do all those bushings and short throw components fit on the 09 w/o a problem?
yesOriginally Posted by RacerFreakXXX ↑Do all those bushings and short throw components fit on the 09 w/o a problem?
nice... I've been having to throw my shifts really hard in order not to bog the car in between shifts.
MIKE ONCE AGAIN THANKS FOR MAKING A GREAT PRODUCT WEDNESDAY WAS A GREAT BUY. I WILL BE BACK TO BUY MORE. THANKS MIKE.
Im going to order one of these. Looks like a great product and the installation looks super easy.
mike i have got to say now that i have both ssk1&2 this yarii feels much much better. Im glad i stopped in yesterday and got those parts. thanks again mike for making such a good product.
I am thinking that the question about the NST short shift working on ALL Yaris including the 09 is because of this.........Originally Posted by RacerFreakXXX ↑Do all those bushings and short throw components fit on the 09 w/o a problem?
NOTE: Toyota sourced linkage from two sources from 2008 on. This shifter kit may not fit some 2008-09 models. If it doesn't fit your car, we recommend the SSK-2 in-cabin short shift kit instead.
This is from the MicroImage website
I'm glad to hear that you are enjoying all your NST goodies 😁Originally Posted by jt258 ↑mike i have got to say now that i have both ssk1&2 this yarii feels much much better. Im glad i stopped in yesterday and got those parts. thanks again mike for making such a good product.
See you next time!
👍👍
Anyone else?!