Yarisworld Archive

Exhaust Pipe Size (Tamaño del tubo de escape)

12 posts · 21,426 views

carloshOriginal postPanama · Jul 26, 2007#1
Bueno este tema lo saque de www.scionlife.com me parece bueno que se sepa a la hora de hacerle la tuberia a nuestros autos que tamaño tomar de referencia.

Posted: 8/6/04 9:13AM Post subject: Exhaust Pipe Size.

This is just some ramble I thought of & had nothing better to figure out, this information is all done by me, so I know some of it might be wrong I am no math major. Use this information in any way you want, just dont blaim me for any problems you have with it.

American Standards:

Stock Pipe:
Pipe Size = 1.75"
Pipe Surface Area = 2.4"

Pipe 2:
Pipe Size = 2"
Pipe Surface Area = 3.14"

Pipe 3:
Pipe 3 Size = 2.25"
Pipe 3 Surface Area = 3.97"
------------------------------
Stock Pipe vs Pipe 2:
Increase in Diameter = .25"
% of Increase = 14.28%
Increase in SA = .74"
% of Increase = 30.83%

Stock Pipe vs Pipe 3:
Increase in Diamete = .5"
% of Increase = 28.57%
Increase in SA = 1.57"
% of Increase = 65.5%

Metric Standards*:

Stock Pipe:
Pipe Size = 45mm
Pipe Surface Area = 1590mm

Pipe 2:
Pipe Size = 50mm
Pipe Surface Area = 1963mm

Pipe 3:
Pipe Size = 55mm
Pipe Surface Area = 2375mm
---------------------------
Stock Pipe vs Pipe 2:
Increase in Diameter = 5mm
% of Increase = 11.1%
Increase in SA = 373mm
% of Increase = 23.5%

Stock Pipe vs Pipe 3:
Increase in Diameter = 10mm
% of Increase = 22.2%
Increase in SA = 785mm
% of Increase = 49.4%

* All the metric numbers are rounded for more simple math. Also The pipe 2 & pipe 3 size are different then the american standards, I did this to show if using mm to measure your exhaust & have pipes made in that size, its much easier to figure out.

Im sorry if information like this has been posted before. The infomation could be used for basics in helping you decide what size exhaust you want. It also shows how that just by increasing from 1.75" pipe to 2.25" pipe is a big difference, might make some people think about a full cat back in the 2" pipe size. This information is also just the pipe, when figureing exhaust flow one needs to know a lot more then just this information.

http://www.scionlife.com/forums/viewtopic.php?t=22925

Replies 11

Vic-2NZFEPanama · Jul 26, 2007#2
Buena informacion pero tengo una pregunta:
todas estas medidas se hicieron en el motor 1nz?
pregunto porque ese es el motor que traen los scion XA y XB

solo para aclarar, muchas gracias
titotengPanama · Jul 26, 2007#3
Originally Posted by Vic-2NZFE ↑
Buena informacion pero tengo una pregunta:
todas estas medidas se hicieron en el motor 1nz?
pregunto porque ese es el motor que traen los scion XA y XB

solo para aclarar, muchas gracias
IZ BARNIZ!!!!! 1NZ
carloshThread starterPanama · Jul 26, 2007#4
Originally Posted by Vic-2NZFE ↑
Buena informacion pero tengo una pregunta:
todas estas medidas se hicieron en el motor 1nz?
pregunto porque ese es el motor que traen los scion XA y XB

solo para aclarar, muchas gracias
Eso es correcto. el 1NZ se le puede meter maximo 2.25 en tuberia.
Vic-2NZFEPanama · Jul 26, 2007#5
entonces hasta cuanto puede llegar la tuberia para el motor 2nz
como el mio? por otros foros he escuchado que hasta 2" es lo maximo
para le 1.3L
carloshThread starterPanama · Jul 26, 2007#6
Originally Posted by Vic-2NZFE ↑
entonces hasta cuanto puede llegar la tuberia para el motor 2nz
como el mio? por otros foros he escuchado que hasta 2" es lo maximo
para le 1.3L
Me parerece que 2" esta bien pero puedes tomar como referencia el diametro actual de tu tuberia y sumarle 1/4 = 0.25 Inches...
Fer.paPanama · Jul 26, 2007#8
2 pulgadas por lo menos sin problemas en el 1.5 nose si en el 1.3 cuando le meta mente a eso le pondre mi experiancia.
carloshThread starterPanama · Aug 2, 2007#9
Hablando de cambiar la tuberia a 2" es necesario cambiar el catalizador por uno que deje pasar mas flujo de aire.

Este me parecion bueno, ademas de ser una compañia lider en el mercado de catalizadores (magnaflow).
Picture not included in this copy

http://www.car-sound.com/02product/d...niversal=53163
Vic-2NZFEPanama · Aug 2, 2007#10
Originally Posted by carlosh ↑
Hablando de cambiar la tuberia a 2" es necesario cambiar el catalizador por uno que deje pasar mas flujo de aire.

Este me parecion bueno, ademas de ser una compañia lider en el mercado de catalizadores (magnaflow).
Picture not included in this copy

http://www.car-sound.com/02product/d...niversal=53163
que pasa si le dejas la tuberia a raja tabla (straight) no es mejor?
Fer.paPanama · Aug 2, 2007#11
Originally Posted by Vic-2NZFE ↑
que pasa si le dejas la tuberia a raja tabla (straight) no es mejor?
🤘
carloshThread starterPanama · Aug 2, 2007#12
Originally Posted by Vic-2NZFE ↑
que pasa si le dejas la tuberia a raja tabla (straight) no es mejor?
Si se puede, pero no se cuando en panama empiecen a regular que todos los carros tengan cata.. como en el norte lo hacen (tu sabes cuestiones ecologicas)
ademas tuberia directa te daria mucho ruido, "Aunque" es posible meterle varios muflers a lo largo del la tuberia (como tiene los Mitsubishi lancer)