Yarisworld Archive

alternator same in scion xb, and yaris???

16 posts · 11,451 views

punchOriginal postBarrie, ontario · Jul 25, 2007#1
can someone in the know, look up the part numbers for the scion xb, the yaris, and the echo, to see if the alternators are the same part number...

I have been looking for a HO alternator, and they make them for the scion's including the xb, which shares the same engine...

thanks again

Replies 15

DJ_SpaRkyGroveland, FL (Near Orlando) · Jul 26, 2007#2
Call the Parts dept of your local Toyota Dealer & ask them for the part numbers for each. That will tell you.

BTW, are you looking at the Iraggi one??
punchThread starterBarrie, ontario · Jul 26, 2007#3
I've searched many car audio sites and they recommend staying away from Iraggi...

I have found 1 place but they want $600 for a 180amp alternator...its a rewind...
DJ_SpaRkyGroveland, FL (Near Orlando) · Jul 27, 2007#4
Ouch. What are you installing?? a wall with 12 12"s??
DuckywitbigfeetzHouston, TX · Jul 27, 2007#5
im looking for something like this too im only running 2 1000 watt 12's (type r's)with a 1000 w rms rockford fosgate amp and my lights dim what else is involved in doing this kind of upgrade i dont want to have electrical problems thanks for the help..
DJ_SpaRkyGroveland, FL (Near Orlando) · Jul 27, 2007#6
Get a 2nd battery & a battery Isolator, you'll be fine.
punchThread starterBarrie, ontario · Jul 27, 2007#7
ok, iraggi just emailed me back, if its the same as the echos', and XB then the price is :
180 $399
200 $419

http://www.highoutputalternator.com/ gave me a price of :$649
punchThread starterBarrie, ontario · Jul 27, 2007#8
Originally Posted by DJ_SpaRky ↑
Ouch. What are you installing?? a wall with 12 12"s??
1400watts RMS...
punchThread starterBarrie, ontario · Jul 27, 2007#9
Originally Posted by Duckywitbigfeetz ↑
im looking for something like this too im only running 2 1000 watt 12's (type r's)with a 1000 w rms rockford fosgate amp and my lights dim what else is involved in doing this kind of upgrade i dont want to have electrical problems thanks for the help..
Well, I'm new to this also, but have been reading, all site recommend you do the "big 3" which consists of upgrading the alternator to battery cable, engine block to car body, and the batteries ground cable to car body, larger the wire the better...

the route i am taking so far, is a 0 guage wire from the battery to the trunk, splitting to 2 4 gauge wires to my amps...

For now, i will probably use a 1 farad cap, but will upgrade to a high outpout alternator, and dual battery set up.
NonStopTuningUSA · Jul 27, 2007#10
The problem you guys have at idle with dimming lights and weak batteries is because your OEM alternator does nothing at/near idle. Your alternator does not start charging until around 1200 rpm.

Your best bet might be to look for a reputable pulley builder. Such a company would be able to build you an Overdrive Alternator Pulley for your stock alternator. A properly built Overdrive Alternator Pulley would cause your OEM alternator to charge at a lower rpm (maybe 900rpm) and would save you time, hassle, and customization required to fit a different alternator.

Good luck gang!
jdiumHillsboro · Jul 28, 2007#11
Originally Posted by DJ_SpaRky ↑
Get a 2nd battery & a battery Isolator, you'll be fine.
till your alternator burns up...
DuckywitbigfeetzHouston, TX · Jul 28, 2007#12
thanks nonstoptuning i like that idea. has anyone found out what the rateing of the stock is yet and how much would it be safe to jump up with out having to rewire engine power. thats what i was originaly asking if i swap out my alternator what else do i have to change. im going to get a grounding kit and a 1 farad cap and try it but if an alternator swap is necessary i would like to know whats involved.
punchThread starterBarrie, ontario · Jul 30, 2007#13
Originally Posted by Duckywitbigfeetz ↑
thanks nonstoptuning i like that idea. has anyone found out what the rateing of the stock is yet and how much would it be safe to jump up with out having to rewire engine power. thats what i was originaly asking if i swap out my alternator what else do i have to change. im going to get a grounding kit and a 1 farad cap and try it but if an alternator swap is necessary i would like to know whats involved.
nothing else is needed, just bolt it up....
DuckywitbigfeetzHouston, TX · Aug 2, 2007#14
so the higher amperage alternator wont burn up stock wiring??
DuckywitbigfeetzHouston, TX · Aug 2, 2007#15
sorry i can do all the other stuff and im good with wiring but never upgraded alternator just wanna make sure
The ArchitectFL · Feb 6, 2010#16
you can try calling iraggi, I got mine from him but I have an 07.