Yarisworld Archive

engine dampener?

16 posts · 4,433 views

cali yarisOriginal postCanoga Park, CA · Jul 25, 2007#1
Sorry if this was covered, but anyone making an engine torque dampener for the Yaris? Or, do we know for sure an xB or xA one will fit?

thanks

Replies 15

ChinoCharlesOH · Jul 25, 2007#2
I couldn't imagine a Scion damper fitting the Yaris. I would like to see one too, though. Everyone pester DME until they make one.

http://www.dme-power.com
JerkrattFair Lawn, NJ · Jul 26, 2007#3
umm i think c-one makes one

Here
cali yarisThread starterCanoga Park, CA · Jul 26, 2007#4
"currently in production" -- means it's not made yet, I think...

That is sweet, I will want one.
whooppee777Maryland · Jul 26, 2007#5
will it fit? could you do a DIY guide with it? i would greatly appreciate it.
cali yarisThread starterCanoga Park, CA · Jul 26, 2007#6
yeah, i'd like to see that too, along with what brand it is and where you got it?

.... pleeeeaaaaase?
eijikikimaruSo. CaL · Jul 26, 2007#7
Sorry for this noob question but what is an engine damper used for?
SpadesOregon,USA · Jul 26, 2007#8
i am not familar with dampers on engines, but it looks like a poor mans motor mount without the harsh ride. looks like a strut mounted to brackets going to the motor and the strut tower brace.

i am guessing it would give firmer shifts without compramising ride like stiff mounts do, someone can correct me on this, cause i am going off of what it looks like...
WRBluenorcal · Jul 26, 2007#9
Mostly for looks.

A rigid brace will stop the block from twisting with the transmission, thus loosing torque. the block wants to spin with the crank, you don't want that, because the torque used to spin the block would be better used to spin the tires. Having the engine rigidly anchored to a solid part of the chassis keeps it from spinning.

Solid engine mounts are a more efficient means of halting engine movement, but you pay for it in NVH. Solid mounts are a bitch to drive with! Poly mounts are a little better/worse - they aren't nearly as solid as metal, so you get less NVH but on the other hand they still allow the engine to move.

A rigid brace would help a little, but you still have a NVH problem.

The problem with most dampners is that they are dampners, a fluid filled shock absorber. They do nothing to halt engine rotation.
AstromanWenatchee, WA · Jul 26, 2007#10
My LeBaron GTC had one. Perhaps I can retrofit it to the yaris....
whooppee777Maryland · Jul 27, 2007#11
NVH?
2006frontySan Bernardino · Jul 27, 2007#12
Noise Vibration Harshness
andriesSpain · Nov 24, 2008#13
Is there already a engine damper for the 1.8 2ZR-FE ?

I think the engine support is not exactly the same as the 1.5 engine or did I wrong?
CASTREXCosta Rica · Nov 24, 2008#14
Originally Posted by andries ↑
Is there already a engine damper for the 1.8 2ZR-FE ?

I think the engine support is not exactly the same as the 1.5 engine or did I wrong?
Nop

There is no engine damper for the 2ZR. You probably will have to buy a damper and get some custom brackets to mount it.

The Yaris and the Yaris TS share a few of their engine mounts but the upper one on the right side is not one of them. Completely different form one car to the other.

And even if there are no Dampers available, there are some other options that can be used to reduce the Engine movements.😉
ROCKLAND TOYOTAROCKLAND COUNTY NY · Nov 24, 2008#15
Originally Posted by cali yaris ↑
"currently in production" -- means it's not made yet, I think...

That is sweet, I will want one.
good luck on the wait seeing as they were supposed to release a BUNCH of yaris items after last years sema......
kounj · Nov 24, 2008#16
found this product on mcmastercar #8644k11 $29, i am just going to fill the trans mount and the bottom one with it. 2 new mounts and this stuff to fill them will be cheaper than a c-one rollstopper mount alone.