Yarisworld Archive

LB Eyelids GROUP BUY (Round 1) -- Final Days!

182 posts · 39,157 views · page 4 of 4

Replies continued

tiksmanAtlanta · Aug 13, 2007#151
I got mine and they have the bubble wrap syndrome. I think I can wet sand and polish it off.
AlphaFoxSpringfield, Mass · Aug 14, 2007#152
I got mine yesterday, and they too had the bubble wrap issue. I ended up using some miguires (sp?) swirl and scratch remover for over an hour and got about 85% of it off. you can still see it, but only if you look at it just right in the light.

when I first opened the bag it smelled like wet paint... the weird thing is only ONE if my lids had the issue! the other was fine.

my main concern is that the left headlight (when sitting inside the car) does not sit flush with the hood. the right lid is perfect (except for some nicks in the fiberglas....) and sits flush. anyone notice that too? the left one also doesnt look quite the same as the left.

overall they are nice and I appreciate your time and effort developing them!
redyarisOrlando, FL · Aug 14, 2007#153
I believe everyone should receive their eyelids by tomorrow, Aug. 15. Let me know if you don't.

Tk, I also volunteer my services for group buy 2 if needed. Thanks!

Lets see some pics people!!!
tk-421Thread starterDagobah · Aug 14, 2007#154
Originally Posted by AlphaFox ↑
I got mine yesterday, and they too had the bubble wrap issue. I ended up using some miguires (sp?) swirl and scratch remover for over an hour and got about 85% of it off. you can still see it, but only if you look at it just right in the light
Good to know you could get it fixed, Alpha! PM me if the remaining marks get annoying and I'll try to work something out.

my main concern is that the left headlight (when sitting inside the car) does not sit flush with the hood. the right lid is perfect (except for some nicks in the fiberglas....) and sits flush. anyone notice that too? the left one also doesnt look quite the same as the left.
OK, now this I'm really concerned about. Is the eyelid correctly aligned and pasted on top of the headlight? Does the left eyelid have the marks as well?
AlphaFoxSpringfield, Mass · Aug 14, 2007#155
Originally Posted by tk-421 ↑
Is the eyelid correctly aligned and pasted on top of the headlight?
Yes, it is aligned and pasted on there the same as the other one... its like the lip that holds the tape on is about 1/4 inch too long and sticks up.

This pic shows the left headlight, the lid is sticking up:
Picture not included in this copy

This pic shows the right headlight, same angle. notice how flush it is:
Picture not included in this copy

This is the left headlight again, showing how much it sticks up from the hood:
Picture not included in this copy

This is the right headlight, same angle. you can barely see it, its very flush:
Picture not included in this copy

Please advise Tk!!
AlphaFoxSpringfield, Mass · Aug 14, 2007#156
ANYONE else have this issue, or am I the only one??

Picture not included in this copy
tca4Delta,BC · Aug 14, 2007#157
I do too, and probably everyone elses' too since they uses the same mould. At least your color looks right, im still finding the right 'white' color for it so i can repaint...
tk-421Thread starterDagobah · Aug 14, 2007#158
I guess that when it rains, it pours! 😢

Those people who will be repainting please PM me so that I can send you the $20 difference.

Those folks suffering from "raised lip" syndrome can cut through the offending extra height by using a dremel. All one would need to do is basically cut the base of the lip (where the tape resides) and change the tape's position to the side. That should work out just as well, and maybe even look better than the right one, since one can adjust how high to cut the eyelid, and hence improve flushness significantly.

Was that clear? I could take some pics if it helps you guys out more.
tk-421Thread starterDagobah · Aug 14, 2007#159
Oh, BTW, I finally heard back from the guy that painted the eyelids. He was pretty sure that it won't help to place the eyelids in the oven, since the paint is now completely dry. So guys, please strike that as an option!
tca4Delta,BC · Aug 15, 2007#160
Yea would be great if you provide some pics for us, so more understandable😁 btw i think i will need to repaint mine, because the color and the bubble wrap issue
AlphaFoxSpringfield, Mass · Aug 15, 2007#161
Can you please ship us all a dremel to fix the issue? heh, kidding.
Why didnt anyone else notice this if they all look like that? its weird too because the right lid looks perfect...

SQUEEKK!! I guess this is what it means to be a gineua pig! hehe
tiksmanAtlanta · Aug 15, 2007#162
I will be repainting but I dont care cause Red Yaris Gave me the paint from his spoiler .👍
tk-421Thread starterDagobah · Aug 16, 2007#163
Originally Posted by tiksman ↑
I will be repainting but I dont care cause Red Yaris Gave me the paint from his spoiler .👍

Now that's costumer service! 😁
Thanks for the help! I need as much of it as I can get these days... 😆
tk-421Thread starterDagobah · Aug 16, 2007#164
Originally Posted by tca4 ↑
Yea would be great if you provide some pics for us, so more understandable😁
I have created a quick illustration to show you exactly which area would need to be cut. I would've shown a pic instead, but I have sent the whole batch to be refined.

1 attachment not included in this copy

AlphaFoxSpringfield, Mass · Aug 16, 2007#165
can you just send me a new left lid once you fix the issue? the paint is horrible on it and its not flush. I can send the bad one back too.
tk-421Thread starterDagobah · Aug 16, 2007#166
I am willing to send out replacement lids as long as two conditions are met:
  1. You agree to pay for shipping
  2. You send me the lids back with some sort of tracking number
As soon as I receive the tracking number, I will have a fresh pair of replacements ready to send out to you.
AlphaFoxSpringfield, Mass · Aug 16, 2007#167
I ended up cutting off the flange as you diagramed. it is sitting flush now and aside from the paint is ok. I will leave it for now I guess.
tk-421Thread starterDagobah · Aug 17, 2007#168
Cool. Which tape did you use to paste the eyelid back?
AlphaFoxSpringfield, Mass · Aug 17, 2007#169
I had some 3M tape allready. trouble is, you can see where the cut is and tape since the lower lip part of the lid that curls under the hood is gone...
yrsdrgnSF,CA · Aug 17, 2007#170
Originally Posted by AlphaFox ↑
I had some 3M tape allready. trouble is, you can see where the cut is and tape since the lower lip part of the lid that curls under the hood is gone...
can you take some snapshots of it plz? thanks
AlphaFoxSpringfield, Mass · Aug 17, 2007#171
sure thing, tonight
yrsdrgnSF,CA · Aug 17, 2007#172
Originally Posted by AlphaFox ↑
sure thing, tonight
Thanks. Can't wait to see then maybe I might cut mine as well.
AlphaFoxSpringfield, Mass · Aug 17, 2007#173
yes, I just cut one. peee you!! heh
tk-421Thread starterDagobah · Aug 17, 2007#174
I want to let you all know that I am gearing up for the second GB for the LB and sedan eyelids.

The updated LB design will have no bottom flange and tighter corners, so as to align properly with the hood line. I am totally willing to replace them for the guys that went for it the first time around, as long as I can reuse the pairs that I sent you originally.

Pics of the updated design and new sedan eyelids soon!
yrsdrgnSF,CA · Aug 17, 2007#175
hehe get some cf eyelids =P just a thought but for later when you have more funds for it hehe
YRX26CAUSTRALIA, SYDNEY · Aug 26, 2007#176
I WANT TO ORDER A PAIR!!!! IM ON THE LIST FOR THE NEXT GB OKAY MEXICAN STORMTROOPER!!! oh crap sorry about the caps
YRX26CAUSTRALIA, SYDNEY · Aug 26, 2007#177
ok that was very rude of me...

* waves* hi everyone im new to this site, im YES a female YRX owner from Sydney Australia.
paradigmFairfield, CA · Aug 26, 2007#178
*waves* lol. owning a yaris has been known to have that effect. welcome :)
YRX26CAUSTRALIA, SYDNEY · Aug 27, 2007#179
Originally Posted by paradigm ↑
*waves* lol. owning a yaris has been known to have that effect. welcome :)

Thanks!!!!
ecoAtlanta · Aug 27, 2007#180
Will you make them for the sedan?
tk-421Thread starterDagobah · Aug 28, 2007#181
Originally Posted by eco ↑
Will you make them for the sedan?
Yes. There will be 2 LB designs and 2 sedan designs to choose from.

I should have this batch completely ready within the next couple of weeks. Stay tuned! 👍
YRX26CAUSTRALIA, SYDNEY · Aug 30, 2007#182
hey what if i cant wait and i want to order it now kuri??