Yarisworld Archive

Shift knob for automatics. Can I see your pics?

42 posts · 13,703 views

W.A.S.POriginal postWestchester County, NY · Jul 16, 2007#1
I'm trying to find a knob for my Yaris,. Something simple and inexpensive. Can I see what you guys have on your cars?
Thanks in advance!

Replies 41

kurasoIsrael · Jul 17, 2007#2
Picture not included in this copy
brickhardmeatInner City, Dallas · Jul 17, 2007#3
I just ordered the OBX from sparks.
punchBarrie, ontario · Jul 17, 2007#4
Originally Posted by W.A.S.P ↑
I'm trying to find a knob for my Yaris,. Something simple and inexpensive. Can I see what you guys have on your cars?
Thanks in advance!

trd from ebay....leather....
JerkrattFair Lawn, NJ · Jul 17, 2007#5
uploading pics to photobucket be back in moment


EDIT:

Picture not included in this copy
Picture not included in this copy
ism3tSouthern California · Jul 17, 2007#6
i have the trd one posted above, LOVE IT
JerkrattFair Lawn, NJ · Jul 18, 2007#7
pep boys lol if you push the center "type s" there are 3 diff settings for the lights
redyarisOrlando, FL · Jul 18, 2007#8
Check my garage for my red glossy one.
kimonaHuntington Bch, CA · Jul 18, 2007#9
I haven't looked at the OEM shift knob too closely. Never really thought about changing it until I saw the nice TRD leather one above.

So, my car isn't here right now and I can't look at it. Please tell me if the shift knob is a threaded or setscrew application?
sherryberryIllinois · Jul 18, 2007#10
jerkratt, i love your stick!
brickhardmeatInner City, Dallas · Jul 18, 2007#11
Originally Posted by kimona54 ↑
I haven't looked at the OEM shift knob too closely. Never really thought about changing it until I saw the nice TRD leather one above.

So, my car isn't here right now and I can't look at it. Please tell me if the shift knob is a threaded or setscrew application?
spins right off
beardaGermantown, MD · Jul 18, 2007#12
Originally Posted by brickhardmeat ↑
spins right off
Anybody know the thread size offhand?
brickhardmeatInner City, Dallas · Jul 18, 2007#13
dunno🤷
2006frontySan Bernardino · Jul 19, 2007#14
M12 x 1.25 metric
JerkrattFair Lawn, NJ · Jul 19, 2007#15
Originally Posted by sherryberry ↑
jerkratt, i love your stick!
😁
yarheadL.A. County · Jul 20, 2007#16
Hey peps,
I have been looking to change mine too. I have an auto-tran aswell but would like to know where i can get a nice simple shift-nob. I want something like an all crome or glass one? Send some link or info. Thanks yall.
brickhardmeatInner City, Dallas · Jul 20, 2007#17
I installed the OBX one from sparks yesterday. I think it looks great especially with the OBX peddle set. Really spruced up the interior.
W.A.S.PThread starterWestchester County, NY · Jul 20, 2007#18
Thanks a lot for the input guys!!!!

I continued my search and found these two babies on Ebay for cheap! I bought both!

2 attachments not included in this copy

W.A.S.PThread starterWestchester County, NY · Jul 20, 2007#19
Ah, Liked these as well!

2 attachments not included in this copy

yrsdrgnSF,CA · Jul 21, 2007#20
do any of those fit? if so, link it up!
eijikikimaruSo. CaL · Jul 21, 2007#21
I personally like the round CF, picture on the left, comment #18.

Like Yrsdrgn said

do any of those fit? if so, link it up!
kimonaHuntington Bch, CA · Jul 21, 2007#22
Originally Posted by eijikikimaru ↑
I personally like the round CF, picture on the left, comment #18.

Like Yrsdrgn said
Ditto
sherryberryIllinois · Jul 21, 2007#23
yeah, don't tease us with just the head.
brickhardmeatInner City, Dallas · Jul 21, 2007#25
wow I haven't seen anything like that in a while, probably would need to make some kind of a base for it to make it look flush but you could probably make it work
drecianSouth Australia · Jul 25, 2007#27
For something completely different, I used a golf ball and just drilled it to size. Don't even need to tap threads as golf balls have a rubber center, and so thread on with a little persuasion. I went this route after finding the 'ball' type shift-knobs available were a little too big for my comfort...
AstromanWenatchee, WA · Jul 25, 2007#28
Originally Posted by punch ↑
trd from ebay....leather....
Did you have any fitting issues? I thought that TRD leather shift knob was setup only for the manual tranny. Let me know because that is the one I like the best. Thanks! Looks awesome BTW 👍
acdaaznNJ · Jul 25, 2007#29
There are two TRD shift knobs in that style. One has the manual markings; that's for the manual. The one without the markings is for auto.
AstromanWenatchee, WA · Jul 25, 2007#30
Originally Posted by acdaazn ↑
There are two TRD shift knobs in that style. One has the manual markings; that's for the manual. The one without the markings is for auto.
Do you happen to know the part #'s or have a picture of the two for comparison?
acdaaznNJ · Jul 25, 2007#31
Auto
Picture not included in this copy
Manual
Picture not included in this copy

As you can see, the auto looks JUST LIKE the manual except there is a silver part on the bottom. I assume that silver part is for changing the thread size.
I don't have the US part number as it doesn't exist for the USDM. However JDM part number for the auto is 33504-SP005.
kimonaHuntington Bch, CA · Jul 27, 2007#33
Originally Posted by acdaazn ↑
Auto
Picture not included in this copy
Manual
Picture not included in this copy

As you can see, the auto looks JUST LIKE the manual except there is a silver part on the bottom. I assume that silver part is for changing the thread size.
I don't have the US part number as it doesn't exist for the USDM. However JDM part number for the auto is 33504-SP005.
BTW, that TRD leather shift knob looks to be identical to the one my father has on his new Tacoma (minus the TRD emblem). I was admirimg it the other day when I was driving with him. He said if it fit my Yaris, I could exchange with him. Lucky for me it fit, so now I have a nice new leather shift knob!
drecianSouth Australia · Jul 28, 2007#34
Don't quote me; but I would assume they are the same knob. The auto version only has the collar to make it end neatly as the auto doesn't butt up against a shift boot like on manual. I could be wrong though, but it seem sot make sense to me cosmetically.
acdaaznNJ · Jul 28, 2007#35
The auto shaft is thinner than the manual. If I remembered correctly, the auto is 9mm and the manual is 12mm.
W.A.S.PThread starterWestchester County, NY · Jul 28, 2007#36
I think the automatic one is 8mm
YarisFan007L.A. county, CA · Aug 20, 2007#37
When replacing the automatic shift knob, did you guys have to remove the center console? If so, is it hard to do? I want to change the stock shift knob for custom ones... please help. Thanx
DJ_TrizzakVancouver, BC · Aug 20, 2007#38
no, you just have to unwind the automatic shift knob - try it
kimonaHuntington Bch, CA · Aug 20, 2007#39
Originally Posted by YarisFan007 ↑
When replacing the automatic shift knob, did you guys have to remove the center console? If so, is it hard to do? I want to change the stock shift knob for custom ones... please help. Thanx
I just spun mine off and spun another one on in about 1 minute!
YarisFan007L.A. county, CA · Aug 20, 2007#40
cool, Thanx for the tip. Haha- i didn't know it just spins off. I'll be going to SuperAutobacs and getting new ones now... wohoo!
kimonaHuntington Bch, CA · Aug 20, 2007#41
Originally Posted by YarisFan007 ↑
cool, Thanx for the tip. Haha- i didn't know it just spins off. I'll be going to SuperAutobacs and getting new ones now... wohoo!
Also check-out the small auto boutique at Mitsuwa Japanese Market in Costa Mesa (Paularino/Bristol). They have a bunch of really nice shift knobs from Japan... some on sale cheap!
YarisFan007L.A. county, CA · Aug 20, 2007#42
Originally Posted by kimona54 ↑
Also check-out the small auto boutique at Mitsuwa Japanese Market in Costa Mesa (Paularino/Bristol). They have a bunch of really nice shift knobs from Japan... some on sale cheap!
great, thanx for the recommendation