My bad if this has already been answered before. Anyways i'm getting my Yaris LB soon and my brother wanted to get me some rims before he leaves outta state. He told me to ask around if the car is 4 x 100 or 4 x 114.3 or something like that. I'm not sure but hopefully ya'll can help me out a bit?
lug nut spacing
31 posts · 8,048 views
Replies 30
They are 4x100...
Originally Posted by slvryaris ↑They are 4x100...
4X100
400?
2x200?
😁
2x200?
😁
4 wheels x 100 centimeters across
how bout the hubs for wheel spacers? i looking for 15mm spacers.........just wondering since we're on the top of the spacing and w/e sorry if it's a bit off topic
The Yaris center bore is 54.1.
If you really want to use spacers, don't go cheap!
You can buy Ichiba aluminum/magnesium alloy hubcentric spacers on ebay for about $60 a pair (plus shipping) including longer studs.
If you really want to use spacers, don't go cheap!
You can buy Ichiba aluminum/magnesium alloy hubcentric spacers on ebay for about $60 a pair (plus shipping) including longer studs.
I found some for $99 from that company but other than that not much for now. What I'm getting is 15mm wheel spacers not just 5mm because the rims i'm using are at a +37 offset i believe
With a 15mm spacer and a +37mm rim, you'd be running at +22mm.Originally Posted by yrsdrgn ↑I found some for $99 from that company but other than that not much for now. What I'm getting is 15mm wheel spacers not just 5mm because the rims i'm using are at a +37 offset i believe
Well... that's insane on a Yaris unless you've modified and extended the fenders and lowered the car for racing.
I have no clue haha. When i had the wheels on it wasn't flush with the fender at all....the fender looked like it ate the wheel LOL. all i recall is that it has a 37 offset because i have them in my friends house for now...trying to get new tires for it first.
I just got 10mm spacers for the rears, made by H & R, and sold at www.allsprings.com. They have several sizes for the Yaris, and they are very good quality, and they ship quickly.
NOTE: when you buy, you are getting one PAIR (2), not four.
NOTE: when you buy, you are getting one PAIR (2), not four.
yea. I don't need a pair for the front of my car because the front wheels line up almost perfectly with the fender no spacers needed hehe. for the rear i probably need 10mm or 15mm spacers. wow those H&R brand ones look expensive.
FRONT: 37mm offset with 205 rubber would stick out a tad.
REAR: 37mm offset with 205 rubber shouldn't be too bad at all. Japanese Vitz owners generally don't run much less than 35mm in the rear for a flush fit.
SO... get the tires, install the package on your car, then measure with a level and mm ruler and see what you'll need.
If your wheels are indeed 37mm's, then you won't need a thing up front and very very little in the rear... maybe 5mm's.
BTW, approx. 42mm up front and 35mm rear is a typical Japanese application using staggered offsets
REAR: 37mm offset with 205 rubber shouldn't be too bad at all. Japanese Vitz owners generally don't run much less than 35mm in the rear for a flush fit.
SO... get the tires, install the package on your car, then measure with a level and mm ruler and see what you'll need.
If your wheels are indeed 37mm's, then you won't need a thing up front and very very little in the rear... maybe 5mm's.
BTW, approx. 42mm up front and 35mm rear is a typical Japanese application using staggered offsets
alright. thanks for the help man.
that's just a picture of what i looks like. it was taking a while back and i don't have any updated pictures of it.
1 attachment not included in this copy
Nice blue wheels. Are they 16x7's? Is your car lowered? What size rubber will you run... 195 or 205?
I have +40 offset and I would like to push the rears out a tad. I think 5mm would do it for me. That would put me +35 in the rear. Now, I want some advice.....don't you think the stock bolts will be fine with just a 5mm spacer? Should have plenty of thread to tighten my nut huh?
this is what I am planning to grab
http://www.racinglab.com/whmalialwhsp1.html
this is what I am planning to grab
http://www.racinglab.com/whmalialwhsp1.html
I think stock bolts would be just fine with 5mm spacer. More than 5mm's will need longer bolts.
BTW, I wouldn't touch those spacers!
Do yourself a favour and get quality hubcentric spacers... it's worth the extra bucks.
With cheap spacers, you run the risk of vibration at speed... which is all too common.
BTW, I wouldn't touch those spacers!
Do yourself a favour and get quality hubcentric spacers... it's worth the extra bucks.
With cheap spacers, you run the risk of vibration at speed... which is all too common.
Yup 5zigen div 3 16x7 they're 205/50/16 tires....i wanna get 205/45/16
I'll check around. I figured the same with 5mm stock would be fine. If you see some 5mm good quality let me know. I did a little looking a around and didn't find however I did see some 10mm. That is a bit much I think.Originally Posted by kimona54 ↑I think stock bolts would be just fine with 5mm spacer. More than 5mm's will need longer bolts.
BTW, I wouldn't touch those spacers!
Do yourself a favour and get quality hubcentric spacers... it's worth the extra bucks.
With cheap spacers, you run the risk of vibration at speed... which is all too common.
Previous post this thread.Originally Posted by kimona54 ↑The Yaris center bore is 54.1.
If you really want to use spacers, don't go cheap!
You can buy Ichiba aluminum/magnesium alloy hubcentric spacers on ebay for about $60 a pair (plus shipping) including longer studs.
Yup, I think 5mm in the rear with your 40mm wheels should look good!
coolness I'll check them for 5mm stock👍Originally Posted by kimona54 ↑Previous post this thread.
I believe my friends bro-in-law put 15mm spacers on his rear for his xb with 16x7 shaumauchers (spelling?) but they really flush with his fenders now
Originally Posted by yrsdrgn ↑I believe my friends bro-in-law put 15mm spacers on his rear for his xb with 16x7 shaumauchers (spelling?) but they really flush with his fenders now
what was his original offset?
Yup, you'll get major rubbing if lowered!Originally Posted by Thirty-Nine ↑Just FYI, I have 15mm rear spacers on my xB. They are the H&R TRAK spacers, and they are very high quality. They came with longer wheel studs, too (where were a PITA to install).
For a smaller spacer, check here:
http://onetongarage.com/products/whe...cer/index.html
So is it the front that has the problem with rubbing? Not so much the backs?
With a 205/50/16 and a +35 offset wheel, I keep getting told I'll rub in the front when lowered ...
Yah, you can run really low offsets on the xbox!
I don't mid a little poke but I don't want any on my yaris just flush or a little closer to flush. I'm pretty sure 5mm would do the trick.
Okay, we're talking about the Yaris/Vitz now... right?Originally Posted by Thirty-Nine ↑Front and back or just front?
Front: With a 35mm and 205/50's and lowered, you'll have major rubbing problems.
Rear: With 35mm, 205/50's and lowered, you'll have rubbing under load.
haha my rear looks like thirty-nine's first rear shot =P according to my friends bro-in-law it has a 37 offset. the same has his on his xb
Hey brickhardmeat,Originally Posted by brickhardmeat ↑I don't mid a little poke but I don't want any on my yaris just flush or a little closer to flush. I'm pretty sure 5mm would do the trick.
If you're running ET40mm (and 205/50/15's), you should be flush up front... is that right?
Take a level and a mm ruler and see how many mm's will bring the rears out to where you'd like them (to match the fronts).
Then look for the size spacers you want... they're available in a wide range of mm widths.