Yarisworld Archive

Trying to decide on the 5zigen wheels - what do you think?

14 posts · 4,084 views

vacantjOriginal postSo Cal · Jul 8, 2007#1
I have a 5dr sedan silver and I'm trying to decide on these wheels:

Per (Black Yaris) I can get it in a 17x7 with a +38 offset, run that with some 205/40R17's would be sharp and fit nice


But I'm trying to decide on the Hyper Silver or Hyper Black finish - what do you guys think?



Picture not included in this copy Picture not included in this copy

2 attachments not included in this copy

Replies 13

suttonschinookClarksville, TN · Jul 8, 2007#2
I think hyper black would look better with a silver car. Silver on silver doesn't provide any contrast. Evan
slvryarisIndiana · Jul 8, 2007#3
Definitly the one on the right.
Kaotic LazagnaCentral Valley, CA · Jul 8, 2007#4
hyper black will look better.

you have a 5-door sedan, as in LB? 😛

just messin', sedans are 4-doors 😉
cali yarisCanoga Park, CA · Jul 8, 2007#5
hyper black +1
SlummyD.C. · Jul 8, 2007#6
hyper black all the way!
joey1320Lakewood, Ohio · Jul 8, 2007#7
Originally Posted by Slummy ↑
hyper black all the way!
👍
07typeSSouthern California · Jul 8, 2007#8
I was just wondering if you are dropped? you should be good with that offset aslong as you stay with the 205/40 and dont go with a wider or thicker sidewall on a dropped car...I was running the same offset on tanabe df's and 205/45/17's, and had major rub, switched to trd springs, still had minor rub...

just warnin ya...
ktoyoRoosevelt, NY · Jul 9, 2007#9
so far it's unanimous
hyper black
DuckywitbigfeetzHouston, TX · Jul 12, 2007#10
im looking at some 5zigen sports engine sc3000 but "i wanna go big or go home" thinking 18x7.5 with a 35 offset probably only a 1" drop
And I know im going to roll my fenders camber hopefully not too much but if i have to ill do. any advice will be greatly appreciated

18x7.5 +35
1" drop
rolled fenders (if necessary)
Camber (hope not)
tire 215/35/18

please help!!
Black YarisToledo, OH · Jul 12, 2007#11
Originally Posted by Duckywitbigfeetz ↑
im looking at some 5zigen sports engine sc3000 but "i wanna go big or go home" thinking 18x7.5 with a 35 offset probably only a 1" drop
And I know im going to roll my fenders camber hopefully not too much but if i have to ill do. any advice will be greatly appreciated

18x7.5 +35
1" drop
rolled fenders (if necessary)
Camber (hope not)
tire 215/35/18

please help!!
it is going to be close.... but if you are willing to roll your fenders, and/or trim your plastic inner fenders a bit... you can pull it off.....
Black YarisToledo, OH · Jul 12, 2007#12
BTW i do not know of any springs that do a 1 inch drop all the way around.... so how are you acomplishing that?
DuckywitbigfeetzHouston, TX · Jul 12, 2007#13
ok well like 1.25 i think
ive decided on cusco coilovers
ill check later
kimonaHuntington Bch, CA · Jul 12, 2007#14
Originally Posted by Duckywitbigfeetz ↑
im looking at some 5zigen sports engine sc3000 but "i wanna go big or go home" thinking 18x7.5 with a 35 offset probably only a 1" drop
And I know im going to roll my fenders camber hopefully not too much but if i have to ill do. any advice will be greatly appreciated

18x7.5 +35
1" drop
rolled fenders (if necessary)
Camber (hope not)
tire 215/35/18

please help!!
Here's what I'd do if I had your question: I'd check with some Japanese Vitz guys. There are many Toyota Vitz with 18's in Japan. So, why "reinvent the wheel" when you can probably get some real world advice about 18" rims, offset, tire size, and rubbing problems.

The Japanese take rim and tire application as serious as a heart attack, then perect it to a fine art!

Try a little internet searching to make some contacts.