Yarisworld Archive

All motor VS Turbocharged

15 posts · 3,349 views

Yaris OmegaOriginal postThe Ark "Wake Me When You Need Me" · Jul 5, 2007#1
Wats up every one just woundering which car u would think will win and which would u prefer But i say that turbocharged would win 👍

Replies 14

Black YarisToledo, OH · Jul 5, 2007#2
all depends on who builds them and how they are built
Yaris OmegaThread starterThe Ark "Wake Me When You Need Me" · Jul 5, 2007#3
ok but if you can choose between them two which would you pick
Black YarisToledo, OH · Jul 5, 2007#4
turbo
Kaotic LazagnaCentral Valley, CA · Jul 5, 2007#5
i think engine response wise, an all-motor will be better. but for me, i can't get enough of that blow-off valve woooosh. so i would go with a turbo.
Black YarisToledo, OH · Jul 6, 2007#6
To tell you the truth for about the same amount of money as a turbo for our car, you can do a 2zzge swap and have the same amount of HP + a 6 speed manual trans, higher reving motor, and capibilty of forced induction at a later time for more HP..... just a lil food for though.... I have been reasearching the 2zzge a lil more lately, and it does not seem like a difficult swap
slvryarisIndiana · Jul 6, 2007#7
Tough to say, but my favorite car is a 69 or 70 Chevelle SS 396....ALL MOTOR
cleongSingapore · Jul 6, 2007#8
Originally Posted by Black Yaris ↑
To tell you the truth for about the same amount of money as a turbo for our car, you can do a 2zzge swap and have the same amount of HP + a 6 speed manual trans, higher reving motor, and capibilty of forced induction at a later time for more HP..... just a lil food for though.... I have been reasearching the 2zzge a lil more lately, and it does not seem like a difficult swap
Would it all fit between the bumper and firewall of a Yaris? I know the 1.8TS has the 1ZZ or 2ZZ but how about the tranny?
Yaris OmegaThread starterThe Ark "Wake Me When You Need Me" · Jul 6, 2007#9
u know black yaris u should do that swap u might be the first one ow and turbocharged will beat an all motor PEACE
Turbo&Autohome · Jul 9, 2007#10
All motor 1.5l LOL! Turbo if anything.....
WRBluenorcal · Jul 9, 2007#11
Originally Posted by slvryaris ↑
Tough to say, but my favorite car is a 69 or 70 Chevelle SS 396....ALL MOTOR
Ya, but it'd be an even better car with a 396 twin turbo ;)
joey1320Lakewood, Ohio · Jul 9, 2007#12
it all depeds on the model of car and the engine. if you are ONLY talking about the 1NZ-FE then forced induction is the only choice for me. if swaps were availbale for this platform then depending on which engine you choose, you could go either way.

theres a fine line between a enjoyable car with good power/handling package and one with nothing but torque steer and unreliable performance. it all depends on the setup, engine, tuning and suspesion upgrades which are done to the car.
Black YarisToledo, OH · Jul 10, 2007#13
Originally Posted by Yaris Omega ↑
u know black yaris u should do that swap u might be the first one ow and turbocharged will beat an all motor PEACE
Originally Posted by cleong ↑
Would it all fit between the bumper and firewall of a Yaris? I know the 1.8TS has the 1ZZ or 2ZZ but how about the tranny?
yes you can stuff the 2zz in there.... and I can get my hands on a whole car that was T-boned, so the drive train is fine, for about $2500... plus I can sell off some of the other good parts of the car like headlights, tail lights, air bags, etc... to make back some of the $$$ I am just not sure about engine management
marcustoronto, canada · Jul 10, 2007#14
turboed 2008 camaro aka bumble bee!!! hehehe🤘
PetersRedYarisThe Black Hills of South Dakota · Jul 11, 2007#15
Originally Posted by cdydjded ↑
Sorry to flame but there is now way in hell you could do a 2zz swap for less than 6-7k. A turbo kit is $3300 + install & you have more whp than a stock 2zz. Just my 2 cents. 🙂
I'm still waiting on BlackYaris's stainless brake lines and rear disc conversion... If you can't even get those done then I'm betting an engine and tranny swap will NEVER happen.

Also, unless you can do the install yourself, you'll have $3000 in labor alone for a custom conversion, even if it will fit.