An1992Original postItaly · Oct 7, 2023#1I have a European Toyota yaris 2 from 2007, with a 1.0 1krfe engine with p0420 error.. I purchased an extension to remove the oxygen probe downstream of the catalytic converter, but the error appears again... Currently the probe values are between 0.1 and 0.85volts... I think that sometimes it exceeds this and the error appears.. I would like to modify the electrical wiring of the probe with the electrical filter, so as to always have volts values in the suitable range but I found various information on the net. Do you have the wiring diagram compatible with Toyota Yaris? Thank you
1 attachment not included in this copy
Replies 4
An1992Thread starterItaly · Oct 8, 2023#2I apologize if I post another site, thanking you but I found this one which can be useful, however they are two different circuits
1 attachment not included in this copy
sh0rtlifepacific north WET · Oct 9, 2023#3get a longer tube version with a "mini cat" in the tube..should solve the issue...if it doesn youve got engine issues
An1992Thread starterItaly · Oct 23, 2023#4 Originally Posted by
sh0rtlife ↑ get a longer tube version with a "mini cat" in the tube..should solve the issue...if it doesn youve got engine issues
What kind of engine problem if any? Piece with 90* or direct filter?
An1992Thread starterItaly · Aug 2, 2024#5"I use one straight + one 90 with mini cat, OBD error present but now no warning light on the dashboard, probably doesn't solve it but delays the notification a lot. I also tried with an electronic filter on the lambda sensor wiring but nothing."