Yarisworld Archive

2008 Sedan - AC Compressor Flywheel

10 posts · 5,902 views

CB900F2Original postToronto · Mar 24, 2023#1
Hey all

I just noticed today my sons 2008 Yaris sedan, the AC compressor,what looks like the AC compressor flywheel came off (and lucky it was just sitting on the splash guard) . And looks like it just screws back on..

Has anyone have this happen to their AC unit?... But not sure the torque amount to tighten it too... I attached a web pic of the unit and its the end part in the red circle .

Any suggestions would be greatly appreciated !
flywheel.jpg

Replies 9

WeeYariGeorgetown, Ontario, Canada · Mar 24, 2023#2
That is actually a big nut that holds the pulley in place on the compressor. We've never seen it happen before and now you are the second person this year to have found it lying in the splash guard.
sh0rtlifepacific north WET · Mar 25, 2023#3
as previously stated your the second person in a year thats had it happen

note to self check tightness of mine..since toyota couldnt even torque my timing guide bolts...
CB900F2Thread starterToronto · Mar 25, 2023#4
What do you guys think about using some blue(semi) Loctite on the threads?
remcafeeArizona · Mar 25, 2023#5
sorry to say this, but i see compressor pulleys fly off a lot, the reason? compressor is going out... they have some wobble to it and the front snout is going out so not to scare you but you might want to save up for a compressor, if it still works then tighten it up and send it away
remcafeeArizona · Mar 25, 2023#6
this isnt yaris specific too its all toyota models, more so happens with rav4s and 4 cylinder camrys it seems
CB900F2Thread starterToronto · Mar 28, 2023#7
Three days I go, I was able to find a tool that is used for like tightening on grinder wheels to a grinder..

I held the pulley with a strap wrench, applied some blue Loctite, and tighten the flywheel on as hard as I could...

So far.. its still on!.. hopefully it stays that way!!
jack blacksoutheast USA · Mar 30, 2023#8
Originally Posted by CB900F2 ↑
Three days I go, I was able to find a tool that is used for like tightening on grinder wheels to a grinder..

I held the pulley with a strap wrench, applied some blue Loctite, and tighten the flywheel on as hard as I could...

So far.. its still on!.. hopefully it stays that way!!
i have the same problem and found some older thread on it too. when i try to tighten it clockwise, the whole thing spins freely.
jack blacksoutheast USA · Apr 2, 2023#10
Originally Posted by CB900F2 ↑
Hey all.. Look at what I found!

https://www.youtube.com/watch?v=Hu9fOhZMjhA
WOW, excellent find. Looks like the steel disc is just a protector for AC pulley that is plastic. This explains a lot how it works and fits together.