Yarisworld Archive

RS Intake Manifold,airbox mod and 1zzfe throttle body/injectors

70 posts · 201,914 views · page 2 of 2

Replies continued

CompeerThread starterAuckland, NZ · Mar 20, 2023#51
Originally Posted by mitch9521 ↑
Excuse me? I wanna see this, that sounds awesome. The 1NZ-FE doesn't get the love it deserves in North America.
Theres a company here that specilizes turning them into jet boat engines, they are light wight, reliable and have plenty of torue for the job being designed for a cvt transmission they are perfect for jet boating. https://www.youtube.com/watch?v=mkyk9MPCe-M

Originally Posted by ardianpradana ↑
I have use the RS intake manifold and not using any spacers

have to cut 1 bolt (knock sensor bolt I believe), and cut some coolant line and reroute the line

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Nice so the bolt i didnt know I had to move and the hose I had realized was going to need modified, Right now im pretty happy with how the long set up is performing but will in the future try that, did you notice any difference?
ardianpradanaJakarta - Bandung , Indonesia · Mar 21, 2023#52
Originally Posted by Compeer ↑
Theres a company here that specilizes turning them into jet boat engines, they are light wight, reliable and have plenty of torue for the job being designed for a cvt transmission they are perfect for jet boating. https://www.youtube.com/watch?v=mkyk9MPCe-M



Nice so the bolt i didnt know I had to move and the hose I had realized was going to need modified, Right now im pretty happy with how the long set up is performing but will in the future try that, did you notice any difference?
in real world driving, I'm not noticing any differences

but on dyno, my peak torque shifts 300rpm higher

with stock manifold, the torque drop 25% between peak torque and torque at rev limiter

with RS manifold, the torque drop 19% between peak torque and torque and limiter
sh0rtlifepacific north WET · Mar 21, 2023#53
id love to know how much lower the peak torque comes on with the RS egr plate and the STOCK non rs manifold
remcafeeArizona · Mar 21, 2023#54
Originally Posted by Compeer ↑
Spent a couple days messing around with an intake pipe, my old man helped me braze it up, its brass and copper 57mm ID. Its a weird "S" shape and took a bit to get the angles right. It uses two normal intake boots large ends so that it fits on nice.

Picture not included in this copy

The upside down standard boot faces the oil breather backwards and puts a lot of pressure on the air box lid, this has fixed that . I need to make some vids of how she sounds because damn it sounds good now.
please for the love of god put your radiator cap right side up, its driving me crazy! lol!
CompeerThread starterAuckland, NZ · Mar 28, 2023#55
Originally Posted by ardianpradana ↑
in real world driving, I'm not noticing any differences

but on dyno, my peak torque shifts 300rpm higher

with stock manifold, the torque drop 25% between peak torque and torque at rev limiter

with RS manifold, the torque drop 19% between peak torque and torque and limiter
Fair enough Im liking how mine runs now with the longer manifold, but may still change it up at some point.

Need to dyno my car to find out and won't do that till i have a tune for it.

Going to get a trd cap and leave it upside down just for remcafe! lmfao
Neinris‘Murica! · Mar 29, 2023#56
Originally Posted by Compeer ↑
...Going to get a trd cap and leave it upside down just for remcafe! lmfao
😆

put the extenders on the stock intake... 🤣
ElMagnificoNew York · May 16, 2023#57
Originally Posted by mitch9521 ↑
No. Stock injectors and TB, the throttle response doesn't bother me after I swapped in the Lexus IS250 pedal that gets rid of the dead spot and makes the pedal heavier feeling.
Part number for pedal?
mitch9521Red Deer, AB · May 22, 2023#58
Originally Posted by ElMagnifico ↑
Part number for pedal?
78110-53120


It will either require a Japan market Vitz NCP131 pedal bracket to work OR you can fab up something yourself. Electrically it is plug and play.
Neinris‘Murica! · May 26, 2023#59
Originally Posted by mitch9521 ↑
78110-53120


It will either require a Japan market Vitz NCP131 pedal bracket to work OR you can fab up something yourself. Electrically it is plug and play.
Mitch, do you still have the 1ZZ TB installed? If so, did the pedal reduced/eliminated the rev hang?
mitch9521Red Deer, AB · May 26, 2023#60
Originally Posted by Neinris ↑
Mitch, do you still have the 1ZZ TB installed? If so, did the pedal reduced/eliminated the rev hang?
Nope, stock TB. I have a port matched 1NZ manifold + 1ZZ TB sitting in my shed, never could get it to play nice with my car so its shelved for the time being. Lots of life events happening, so.

To answer your question; no it didn't change the rev hang. It just made the pedal even with the brake for easy heel toe downshifts and made the pedal heavier which I find much easier to modulate. It also eliminated that annoying dead spot the stock pedals have.
sh0rtlifepacific north WET · May 28, 2023#61
i wonder how well that pedal plays with the 1.8 tb....i know the TB removed "most" of the dead spot and rev hang...its still there but its been cut by more than 1/2

ive had no luck finding the pedal
mitch9521Red Deer, AB · May 28, 2023#62
Originally Posted by sh0rtlife ↑
i wonder how well that pedal plays with the 1.8 tb....i know the TB removed "most" of the dead spot and rev hang...its still there but its been cut by more than 1/2

ive had no luck finding the pedal
I came across an IS250 at a U-Pull, literally paid 20 bucks for it. Theres been a few more I've come across that I have passed on.
sh0rtlifepacific north WET · May 28, 2023#63
ontario vs OR...yeah...hell i havnt seen a 5dr yaris in over a year
mitch9521Red Deer, AB · Jun 4, 2023#64
Originally Posted by sh0rtlife ↑
ontario vs OR...yeah...hell i havnt seen a 5dr yaris in over a year
90% of Yari' here are 5 doors. Seeing a 3 door 3rd gen actually turns my head, they are quite uncommon. 2nd gens are a little more common.
sh0rtlifepacific north WET · Jun 4, 2023#65
3dr mk2s are uncommon but seen here, 5drs dont exist, mk3 5drs are even pretty uncommon
sedans fall from the skys....but when it comes to "wrecked" hatches..they dont exist at all

ive got a run into BC schedualed to pickup some stuff from MIL's storage, and im hoping i can hit a yard up there with a 5dr in it for some last tidbits at the same time

still have yet to complete the power window swap due to missing pieces....i can live with the door panels, but ive only managed to get 1 rear regulator and harness..fronts full power atleast
mitch9521Red Deer, AB · Jun 4, 2023#66
Originally Posted by sh0rtlife ↑
3dr mk2s are uncommon but seen here, 5drs dont exist, mk3 5drs are even pretty uncommon
sedans fall from the skys....but when it comes to "wrecked" hatches..they dont exist at all

ive got a run into BC schedualed to pickup some stuff from MIL's storage, and im hoping i can hit a yard up there with a 5dr in it for some last tidbits at the same time

still have yet to complete the power window swap due to missing pieces....i can live with the door panels, but ive only managed to get 1 rear regulator and harness..fronts full power atleast
Yeah definitely hitting up a Canuck U-pull would be a good idea. Fairly easy to find a 5 door with power windows here.
sh0rtlifepacific north WET · Jun 5, 2023#67
Originally Posted by mitch9521 ↑
Yeah definitely hitting up a Canuck U-pull would be a good idea. Fairly easy to find a 5 door with power windows here.
i was going to hop the ferry out of port angels to victoria, but i may go the long way round thru vancouver just so i can have a possibility of 2 yards...

would be extra amusing to get the door panels out of canada..since it IS a canadian 07 5dr living stateside
CompeerThread starterAuckland, NZ · Jul 13, 2023#68
Originally Posted by Neinris ↑
😆

put the extenders on the stock intake... 🤣
It is! Its crazy torque down low now with the other mods Ive done, very very easy to loose traction now in 2nd and in the wet in most gears lol.

I haven't been active for a while because the car currently is just damn fun to drive, the Throttle body change, intake runner spacer, intake tube and airbox mod are just working so damn well. The car has no dead spot any more and will DURTTTTT all the way from 1.8krpm..give her the beans and it lights up till red line. With only 6400rpm max it feels like I never get off the torque curve. I dont think I will change the manifold to the shorter one as currently she destroys the tires in 1st and 2nd gear and feels like you are actually driving a hot hatch.
sh0rtlifepacific north WET · Jul 19, 2023#69
Originally Posted by Compeer ↑
It is! Its crazy torque down low now with the other mods Ive done, very very easy to loose traction now in 2nd and in the wet in most gears lol.

I haven't been active for a while because the car currently is just damn fun to drive, the Throttle body change, intake runner spacer, intake tube and airbox mod are just working so damn well. The car has no dead spot any more and will DURTTTTT all the way from 1.8krpm..give her the beans and it lights up till red line. With only 6400rpm max it feels like I never get off the torque curve. I dont think I will change the manifold to the shorter one as currently she destroys the tires in 1st and 2nd gear and feels like you are actually driving a hot hatch.
id kill for the spacer..they dont seem to exist here.....all said mine pulls real good for everything else ive done
CompeerThread starterAuckland, NZ · Aug 3, 2023#70
Originally Posted by sh0rtlife ↑
id kill for the spacer..they dont seem to exist here.....all said mine pulls real good for everything else ive done
Its the EGR plate that I used JB weld on to seal the holes on. where ever you find the shorter manifold you find the egr plate, it bolts on to our block normally, just means you have to loose the top engine cover.