CompeerOriginal postAuckland, NZ · Jan 12, 2023#1Seen this Axios GT with TRD 1nz-fet for sale here in New Zealand and thought I would post the engine bay as I myself had seen the turbo engine but not the trd turbo version and that pipe work is awesome!
I want this motor and ecu.
Picture not included in this copy
Replies 21
sh0rtlifepacific north WET · Jan 13, 2023#2the hell is an axios?
i was looking at the enginebay thinking why is everything in the wrong spots and moved a lil..then i spotte dthe headlights...started thinking its an echo?
regardless its cool to see a trd 1nz....id like the pieces
CompeerThread starterAuckland, NZ · Jan 13, 2023#3 Originally Posted by
sh0rtlife ↑ the hell is an axios?
i was looking at the enginebay thinking why is everything in the wrong spots and moved a lil..then i spotte dthe headlights...started thinking its an echo?
regardless its cool to see a trd 1nz....id like the pieces
Weird little japanese only Corolla offshoot, the turbo 1nz-fet is rare but this trd one is cool as, heres the exterior..not so cool i think the yaris vitz is way cooler looking it just needed this motor.
Picture not included in this copy sh0rtlifepacific north WET · Jan 13, 2023#4very yaris hood and partial bumper, id almost waged that clip would fit or could be slightly altered to fit...i do like the headlights better
plumbing it for an IC would be tricky
CompeerThread starterAuckland, NZ · Jan 13, 2023#5 Originally Posted by
sh0rtlife ↑ very yaris hood and partial bumper, id almost waged that clip would fit or could be slightly altered to fit...i do like the headlights better
plumbing it for an IC would be tricky
Nah thats an intercooler on the front, the trd twin pipes go over the motor down to the turbo and then back over to the intercooler and then into the stock intake.
Its tiny, its the same one front mounted thats normally top mounted.
mitch9521Red Deer, AB · Jan 13, 2023#6Its too bad the 1NZ is pretty much maxed out on the bottom end with the TRD turbo variants.
sh0rtlifepacific north WET · Jan 14, 2023#7so your telling me both of those shiny black pipes goes to an intercooler?
CompeerThread starterAuckland, NZ · Jan 15, 2023#8 Originally Posted by
sh0rtlife ↑ so your telling me both of those shiny black pipes goes to an intercooler?
Yeah, its tucked in behind the radiator.
sh0rtlifepacific north WET · Jan 15, 2023#9weird
the more i look at it the more i question if its even possible to use that stuff on a yaris thats LHD ...look to the right EVERYTHING is in a weird spot and relocated
CompeerThread starterAuckland, NZ · Jan 16, 2023#10 Originally Posted by
mitch9521 ↑ Its too bad the 1NZ is pretty much maxed out on the bottom end with the TRD turbo variants.
Does the 1nz-fet have the same conrods? Turbo variants normally have stronger conrods and deep dished pistons in my experience but have not been able to find info on the 1nz-fet as they are so rare.
Originally Posted by
sh0rtlife ↑ weird
the more i look at it the more i question if its even possible to use that stuff on a yaris thats LHD ...look to the right EVERYTHING is in a weird spot and relocated
Haha yeah but yours is the weird relocated one! RIGHT hand drive 😆
sh0rtlifepacific north WET · Jan 16, 2023#11 Originally Posted by
Compeer ↑ Does the 1nz-fet have the same conrods? Turbo variants normally have stronger conrods and deep dished pistons in my experience but have not been able to find info on the 1nz-fet as they are so rare.
Haha yeah but yours is the weird relocated one! RIGHT hand drive 😆
i dunno..id say there probably just as may LHD as RHD....just the RHD's got more engine size options including 4wd, and more of the "performance" version
10-1 odds are the slugs are indeed different as a lowwer comp is generaly REQUIRED with turbo to make it survive and pass emissions requirements..but the con rods are not always different
but with the VVT being able to tweak the cams into bleeding compression or adding to it..they may not have neeeded to change the slugs even..just re-tune the brain and change the VVT timing
im very curious of it myself
CompeerThread starterAuckland, NZ · Jan 17, 2023#12 Originally Posted by
sh0rtlife ↑ i dunno..id say there probably just as may LHD as RHD....just the RHD's got more engine size options including 4wd, and more of the "performance" version
10-1 odds are the slugs are indeed different as a lowwer comp is generaly REQUIRED with turbo to make it survive and pass emissions requirements..but the con rods are not always different
but with the VVT being able to tweak the cams into bleeding compression or adding to it..they may not have neeeded to change the slugs even..just re-tune the brain and change the VVT timing
im very curious of it myself
Yeah if thats the case, the ECU is what you would want from one, everything else is easy and at that point may as well get a fancy aftermarket ecu with vvti and get it tuned, thats the dream haha
I keep looking at second hand aftermarket ecu but im not sure what to get or where to go to get it tuned etc.
sh0rtlifepacific north WET · Jan 17, 2023#13from what ive learned..unless youve got a ton of disposable money to burn on a dyno....try and stay close to stock with small mods..which means if you want to turbo swap find a turbo ecu
mitch9521Red Deer, AB · Jan 18, 2023#14 Originally Posted by
Compeer ↑ Does the 1nz-fet have the same conrods? Turbo variants normally have stronger conrods and deep dished pistons in my experience but have not been able to find info on the 1nz-fet as they are so rare.
Yes, to my knowledge the bottom end is the exact same as a regular 1NZ-FE, compression ratio is still ~10.5:1. AFAIK all they did was put a small turbo on it with a safe ~6psi or so of boost and send it out the door.
sh0rtlifepacific north WET · Jan 18, 2023#15 Originally Posted by
mitch9521 ↑ Yes, to my knowledge the bottom end is the exact same as a regular 1NZ-FE, compression ratio is still ~10.5:1. AFAIK all they did was put a small turbo on it with a safe ~6psi or so of boost and send it out the door.
that begs the other question is the ecu different?...i mean if its the same bottom end and comp, looks like the intake is the same too...cams?
whats genuinely different?...besides the obvious like the intake tract including the turbo..yet the manifold looks like it might even be the same
mitch9521Red Deer, AB · Jan 19, 2023#16 Originally Posted by
sh0rtlife ↑ that begs the other question is the ecu different?...i mean if its the same bottom end and comp, looks like the intake is the same too...cams?
whats genuinely different?...besides the obvious like the intake tract including the turbo..yet the manifold looks like it might even be the same
I'm betting the ECU is different, or at least the tune is but I can't confirm anything. I'm kinda just going off speculation and what little info I can find on the interwebs lol
sh0rtlifepacific north WET · Jan 20, 2023#17sad part is alot of the info either doesnt exist or just "hints" at it..nothing solid and it sucks
mitch9521Red Deer, AB · Jan 21, 2023#18 Originally Posted by
sh0rtlife ↑ sad part is alot of the info either doesnt exist or just "hints" at it..nothing solid and it sucks
Import one and pull it apart lol
sh0rtlifepacific north WET · Jan 21, 2023#19trust me ive been eyeballing one too nice to take apart for 5k..imported....
mitch9521Red Deer, AB · Jan 22, 2023#20 Originally Posted by
sh0rtlife ↑ trust me ive been eyeballing one too nice to take apart for 5k..imported....
5k buys you a beefed up bottom end and custom turbo setup lol
CompeerThread starterAuckland, NZ · Jan 22, 2023#21 Originally Posted by
mitch9521 ↑ 5k buys you a beefed up bottom end and custom turbo setup lol
5k could get you a 2zz-ge+trans and the turbo set up! Infact you could probably even get someone to install it for that price!
mitch9521Red Deer, AB · Jan 27, 2023#22 Originally Posted by
Compeer ↑ 5k could get you a 2zz-ge+trans and the turbo set up! Infact you could probably even get someone to install it for that price!
Problem with the 2ZZ-GE is that they aren't really rebuildable due to those MMC cylinder liners and finding low mileage ones that haven't been beat on are getting harder and more expensive. Good engines though, probably the last true "hotrod" 4 cylinder Toyota built. 2ZZ-GEs have been swapped into Yaris'. Not alot of documentation about it unfortunately though.