Yarisworld Archive

Yaris Hatchback 2016 rear axle beam compatibility

4 posts · 13,738 views

nhu001Original postMiami · Oct 22, 2022#1
Hey guys!! I just bought a Yaris 2016 Hatchback France built and I need to replace the axle beam but I can't find it at the junkyards.

I was wondering what other vehicles are compatible with this model so I can broaden my search.

I did my research and the part number is 42110-0D510.

Thanks!!

Replies 3

BilliamUSA · Oct 25, 2022#2
Unlike the 1st gen Yaris which shared a rear beam with the Prius C and Scion xD....it looks like the 2nd gen doesn't share one with any other vehicle. Kind of surprising really. But then again, Toyota has been moving away from torsion beam axles for a few years now.
Neinris‘Murica! · Oct 25, 2022#3
Originally Posted by Billiam ↑
Unlike the 1st gen Yaris which shared a rear beam with the Prius C and Scion xD....it looks like the 2nd gen doesn't share one with any other vehicle. Kind of surprising really. But then again, Toyota has been moving away from torsion beam axles for a few years now.
What are you referring to as the "1st Gen"? I'm asking because the U.S. "1st Gen" is different from the ones around the world.

Here's a link that shows the Yaris generations:

https://en.wikipedia.org/wiki/Toyota_Yaris

If you're referring to the 2007-2011 as the "1st Gen" (US), that generation actually shares the same axle frame as the "2nd Gen" (2012-2018) US, which some of us here are sought-after, the SE model at least, for the rear disc conversion. The US 3rd Gen were actually Mazda 2 based models.
BilliamUSA · Oct 28, 2022#4
Originally Posted by Neinris ↑
What are you referring to as the "1st Gen"? I'm asking because the U.S. "1st Gen" is different from the ones around the world.

Here's a link that shows the Yaris generations:

https://en.wikipedia.org/wiki/Toyota_Yaris

If you're referring to the 2007-2011 as the "1st Gen" (US), that generation actually shares the same axle frame as the "2nd Gen" (2012-2018) US, which some of us here are sought-after, the SE model at least, for the rear disc conversion. The US 3rd Gen were actually Mazda 2 based models.
I can only speak of the 1st gen here in The States. As for as compatibility between the US first and 2nd gen I was basing that on pictures and part numbers