Should both sides of the car be jacked up to replace the front struts & springs? Same question for the rear shocks & springs.
For the front struts I was going to follow this video, which looks like he has only one side jacked up. But I'd like verification from you fine folks.
For the rear shocks I was going to follow this video. Rear springs this video.
If you have any other tricks or tips, I'd appreciate it. I'm doing front struts & springs, rear shocks & springs, TRD rear sway bar, and new wheels. From my research on the forum it seems pretty straight forward, but anything helps. I found these torque specs:
Front struts
Bottom mounting bolts: 121 ft lb really? That high?
Brake hose mounting bolt: 22 ft lb
Top spring compression nut: 25 ft lb - not sure what nut this is? Haven't seen it in any videos
Top nut: 41 ft lb
Stabilizer bar bolts: 55 ft lb
Rear shocks
Top nut: 18 ft lb
Bottom bolt: 36 ft lb
Lug nuts: 76 ft lb
For the front struts I was going to follow this video, which looks like he has only one side jacked up. But I'd like verification from you fine folks.
For the rear shocks I was going to follow this video. Rear springs this video.
If you have any other tricks or tips, I'd appreciate it. I'm doing front struts & springs, rear shocks & springs, TRD rear sway bar, and new wheels. From my research on the forum it seems pretty straight forward, but anything helps. I found these torque specs:
Front struts
Bottom mounting bolts: 121 ft lb really? That high?
Brake hose mounting bolt: 22 ft lb
Top spring compression nut: 25 ft lb - not sure what nut this is? Haven't seen it in any videos
Top nut: 41 ft lb
Stabilizer bar bolts: 55 ft lb
Rear shocks
Top nut: 18 ft lb
Bottom bolt: 36 ft lb
Lug nuts: 76 ft lb