Yarisworld Archive

NCP90 Rear Drum to Disc swap

76 posts · 207,427 views · page 1 of 2

CompeerOriginal postAuckland, NZ · Oct 3, 2022#1
Hey guys I own a NZ new 2007 trd yaris NCP90, It's a 1.5 vvti 1nzfe 5speed manual with full trd trim and only 133,000km so shes in great shape.. I have previously changed the speedo cluster to the Vitz RS jdm cluster (was not fun) and put 15x7" old school deep dish Roh wheels and some BF goodrich low pro tires to replace the 2000's 17" chrome gross wheels it had on it. I also spent a day scrapping the trd lightening sticker kit off it as it was crazy cracked, but may get it restored as it was a $750 trd option.

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

Ok so it has all the same or even better trd versions of parts like the vitz RS BAR the rear drums. The vitz rs has the rear disc brakes and thats where this crashed vitz RS comes in as the donor.

https://gyazo.com/d32e373b134ee196f11a5f50c4d46f50

So the plan is full rear axle with everything attached so brake lines and ebrake cables.

So do I need the brake master cylinder as well guys? I cant find a different part number and people do other kits with out changing but thought Id ask and also document this a bit. Also anything else different for vitz rs? Does ecu have a different tune?

Shes low Km pretty rare car so this will only add value to her being the only actual Yaris with rear discs like the Vitz RS and allow me so many more brake upgrade options as far as pads and discs go.

Reading more on here i think I need the brake propertioning valve instead of the brake master cylinder? Tomorrow arvo i go to check out the car and tell them what i need them to pull off for my conversion kit which they gave me a flat price on, I just need to have the parts list ready.

Edit:
Checked out the donor car today and someone had nabbed a brake disc but also taken it apart and no bolts to be seen. So I may have to flag this. got 3 weeks before it gets scrapped so need to decide if i should just buy what they have and find new bolts.

Replies 75

remcafeeArizona · Oct 4, 2022#2
you would want to get the front brakes too off of it because then your rear brakes would be bigger than the fronts, you do not need a proportioning valve if you do the front and rear brakes off of the vitz rs
remcafeeArizona · Oct 4, 2022#3
you will also need the e brake cables, brake lines (flexible and hard lines on rear axle), backing plates, and i would get new rear axle bushings while you are doing that work
CompeerThread starterAuckland, NZ · Oct 4, 2022#4
Whats the size of the vitz RS front brake rotors compared to the 1.5 Yaris? Some of this info is hard to find, but I can measure my front rotors and the vitz rs, but it didnt look bigger and the rear ones are tiny. The front brakes are all their if its just the callipers and the rotors I need thats easy. Axle bushings should be sweet its pretty low k and never been thrashed, will check them to make sure.
remcafeeArizona · Oct 4, 2022#5
i cant remember exact size, i remember them being 25mm larger overall diameter, and like 5mm more thick, calipers physically look the same dimensions but the caliper piston bore diameter is larger
CompeerThread starterAuckland, NZ · Oct 4, 2022#6
thanx bro! ok front and rear brakes it is!

Edit: went back today and looked and the front brakes were missing most of the parts as they had been taken apart and sold in parts but then he said he though he had another RS but older model in the back and when i looked it was the same model and had the entire full set of untouched everything!

it just had 3 cars stacked ontop of it. Anyway Im getting the front hubs and brakes, rear entire subframe with hoses and the hand brake cables.

I hope the front brake hoses are the same?
remcafeeArizona · Oct 6, 2022#7
yes the front hoses are the same
CompeerThread starterAuckland, NZ · Oct 8, 2022#8
Sweet thank you. Whole set is going to be 225usd. Which I think is a pretty sweet price for basically the entire rear end and front erntire hubs lol

Should be able to drop the old one off and pop the new one on, Will just need to watch some guides on installing the handbrake cables.

Once I get this done plan is a custom header, maybe the 1zz throttle body and last but not least Ive been searching for a decent LSD corolla gearbox that bolts up.
remcafeeArizona · Oct 8, 2022#9
damn im jelous i bought everything new at my work with employee discount was still 1700$ i think, its hard to find rear disc yaris se out where i am that are in scrapyards
CompeerThread starterAuckland, NZ · Oct 10, 2022#10
Yeah Im in New Zealand so we have NZ new Yaris and also japanese secondhand import Vitz.

NZ has for the last 40 years imported secondhand JDM cars enmass. We have a deal with japan for their secondhand cars.

So there was a SE yaris that had the same brakes?
remcafeeArizona · Oct 10, 2022#11
the usdm 2012-2018 toyota yaris SE was outfitted with larger front brakes and rear disc brakes compared to the lower level trims
Neinris‘Murica! · Oct 10, 2022#12
Originally Posted by remcafee ↑
you will also need the e brake cables, brake lines (flexible and hard lines on rear axle), backing plates, and i would get new rear axle bushings while you are doing that work
Would you happen to know the PN for the hard lines for the rear?
CompeerThread starterAuckland, NZ · Oct 11, 2022#13
Just did a little research and discs have between 17-33% less braking distance and have the same even after alot of braking where as the drums become weaker brakes the hotter they get.

This video shows this well https://www.youtube.com/watch?v=hgtZZUJ6PzA.

You can see the drum brake truck never even gets close to stopping where the disc brake truck does.

And cheers man the Yari's name is Ruby! I named her since I had named the last two corollas I had, First was Sally and the next was Betsy.

Also good old might car mods lol...my guide https://www.youtube.com/watch?v=3YhUv4cBoiA
enviriCT · Oct 12, 2022#14
^ hah its great to get solid figures to show those "its only cosmetic" naysayers of the mighty disc swap :P
CompeerThread starterAuckland, NZ · Oct 12, 2022#15
This is the best upgrade you can do for your car after tyres.

Also found this guy on youtube and they show you how to change a bunch of toyota brakes over that are all partsbin stuff and interchangeable.

https://www.youtube.com/watch?v=V6scgqKauLM
remcafeeArizona · Oct 12, 2022#16
Originally Posted by Neinris ↑
Would you happen to know the PN for the hard lines for the rear?
47323-0d201 and 47324-0d201 are the part numbers for the left and right hard lines.
remcafeeArizona · Oct 12, 2022#17
Originally Posted by Flubby ↑
This car looks pretty awesome! I wonder how much stopping distance will be improved with discs on the back, Im assuming it will be reduced a bit.
to be honest, the brakes dont necessarily change the stopping distance in my opinion, the thing i noticed most is more instant bite when you hit the pedal and less brake fade when you are 5+ laps in on a track the pedal does not get spongy.
tires are what affects your stopping distance in all reality
Neinris‘Murica! · Oct 13, 2022#18
Originally Posted by remcafee ↑
47323-0d201 and 47324-0d201 are the part numbers for the left and right hard lines.
Thank you Remcafee... well fudge, I thought I found the correct part numbers. Would you be able to tell me what 47323-52110 and 47324-52100 are? Because those are what I ordered. 😳

Originally Posted by remcafee ↑
to be honest, the brakes dont necessarily change the stopping distance in my opinion, the thing i noticed most is more instant bite when you hit the pedal and less brake fade when you are 5+ laps in on a track the pedal does not get spongy.
tires are what affects your stopping distance in all reality
Tires will definitely help your stopping power, no argument there.

In my experience, since my DeeDee (Yaris) don't have ABS, I've locked my front wheels more than a few times, due to my rear drum brakes fading, going down a hill and suddenly stopping at a traffic light. I believe its the rear brakes, because they were great for the first 6 months when I first replaced them, never locked my wheels and they supposedly should last longer than the front disc because the front brakes takes most of the weight and beating. It's starting to get colder here in MD and it seems to be helping cool the drums which have prevented me from locking up, or maybe it's just my imagination.
DeeDee is the third car I've owned without ABS. First was a 1973 VW Beetle, which I bought to learn how to drive a manual, it had 4 drum brakes!!! I locked the front wheels often because she just wouldn't stop sometimes, I later found that the previous owner had plugged the hole in the brake fluid reservoir leading to the rear because there's a leak somewhere in the hardline going to the rear. The second car I owed that didn't have ABS was a 92 Prelude, which had all disc brakes. I only locked up the wheels a couple of times when I first got her, before I've learned how to control my braking with that car. I was a lot younger then and more aggressive driver then than now.
So I'm definitely onboard with getting all 4 disc brakes.
I hope someone found my experiences useful. 🙂
CompeerThread starterAuckland, NZ · Oct 13, 2022#19
Yeah sounds about right.

Did you change your wheel studs to longer ones? I would like to get some 3-5mm spaces to fix offset on my roh zs.

Im going to to change the gear box oil too its a bit crunchy some times going into gears hence Ive been looking for a good lsd unit. Would also pick your brain on gear box oil you prefer?
remcafeeArizona · Oct 15, 2022#20
Originally Posted by Neinris ↑
Thank you Remcafee... well fudge, I thought I found the correct part numbers. Would you be able to tell me what 47323-52110 and 47324-52100 are? Because those are what I ordered. 😳



Tires will definitely help your stopping power, no argument there.

In my experience, since my DeeDee (Yaris) don't have ABS, I've locked my front wheels more than a few times, due to my rear drum brakes fading, going down a hill and suddenly stopping at a traffic light. I believe its the rear brakes, because they were great for the first 6 months when I first replaced them, never locked my wheels and they supposedly should last longer than the front disc because the front brakes takes most of the weight and beating. It's starting to get colder here in MD and it seems to be helping cool the drums which have prevented me from locking up, or maybe it's just my imagination.
DeeDee is the third car I've owned without ABS. First was a 1973 VW Beetle, which I bought to learn how to drive a manual, it had 4 drum brakes!!! I locked the front wheels often because she just wouldn't stop sometimes, I later found that the previous owner had plugged the hole in the brake fluid reservoir leading to the rear because there's a leak somewhere in the hardline going to the rear. The second car I owed that didn't have ABS was a 92 Prelude, which had all disc brakes. I only locked up the wheels a couple of times when I first got her, before I've learned how to control my braking with that car. I was a lot younger then and more aggressive driver then than now.
So I'm definitely onboard with getting all 4 disc brakes.
I hope someone found my experiences useful. 🙂
hmmm it appears those part numbers are a production change effect i am 90% sure they are the same just when toyota changes faciltys or part manufacturers they change the part number, im sure they are the same if not very similar, might have some different inspection paint marks and could be a different color, toyota always changes up the fine details like that, its rather annoying if you ask me but it is what it is.
remcafeeArizona · Oct 15, 2022#21
Originally Posted by Compeer ↑
Yeah sounds about right.

Did you change your wheel studs to longer ones? I would like to get some 3-5mm spaces to fix offset on my roh zs.

Im going to to change the gear box oil too its a bit crunchy some times going into gears hence Ive been looking for a good lsd unit. Would also pick your brain on gear box oil you prefer?
you can use 5mm spacers with stock studs, you still have lots of thread bite left to safely fasten a lug nut all through the stud, if you only get lless than 2 full turns of thread then thats unsafe as hell.
use redline mt90, it really is magic how well it works on improving high mileage transmissions with worn synchros.
CompeerThread starterAuckland, NZ · Oct 17, 2022#22
Sweet cheers for the advice bro!

Todays the day, will be going out to pick it all up shortly, will post pics tonight of the parts!

EDIT: damn the wreckers hadnt even pulled the parts off the old car...Told me another week lol ffs..good things take time I guess
sh0rtlifepacific north WET · Oct 18, 2022#23
ive considered snagging similar parts out of japan as i noted some of those cars wearing 14s with rear disc..to which i was shocked

can you confirm?
remcafeeArizona · Oct 18, 2022#24
Originally Posted by sh0rtlife ↑
ive considered snagging similar parts out of japan as i noted some of those cars wearing 14s with rear disc..to which i was shocked

can you confirm?
i will see if i can find a 14" wheel at my work and try test fitting on my car, dont get your hopes up though as 14" wheels are hard to see around here with an array of minivans and crossovers here at my shop
Neinris‘Murica! · Oct 18, 2022#25
Originally Posted by sh0rtlife ↑
ive considered snagging similar parts out of japan as i noted some of those cars wearing 14s with rear disc..to which i was shocked

can you confirm?
I’m not sure if 14s will fit, not for the front anyway. I imagine if you have rear disc brakes then your front rotors are bigger. I have the SE rotors upfront, and they barely fit 15s.

2 attachments not included in this copy

CompeerThread starterAuckland, NZ · Oct 25, 2022#26
Parts are ready for me! Will be collecting today and taking some pics of the loot!
CompeerThread starterAuckland, NZ · Oct 27, 2022#27
All done some of the wip pics, ran out of light to take pics with them donje but will take some tomorrow after I wear the rust off the rotors with a decent drive.

I have lock nuts on the wheels that the tyre shop installed..I broke two of the locknut sockets..I adned up bashing the second crasked socket into a brass tube so ut couldnt break anymore and got the wheels off. None of thebolts had been touched on the car and I did it with hand tools so every second bolt was a struggle and I installed it all myself. I do not recommend trying to hold up, align and screw bolts into a rear subframe by yourself! Not fun!

Brakes feel good but very different, no longer are they super touchy feels like I have waider range of braking now but I may still have some air in the system. Also the parts ended up coming with everything, shocks springs the works, So i have spare set of all rear bushings full set of spare shocks and springs and I have the old brakes to sell also.

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Neinris‘Murica! · Oct 27, 2022#28
Is your car lowered? Did you use the upper mounting holes?
remcafeeArizona · Oct 27, 2022#29
you also did the fronts right? if you panic stop its gonna be unsafe and the car will wrap itself around
CompeerThread starterAuckland, NZ · Oct 27, 2022#30
Originally Posted by Neinris ↑
Is your car lowered? Did you use the upper mounting holes?
Car is lowered on trd springs and shocks from factory, it was using the lower mounts so I put it back as it was. I didn't know this was a thing tho..Now I want to change the mount positions.

Literally gonna go change those mounts today, the car always felt weird in the ass, I ran lower tire pressure rear to make up for it.

Cheers for letting me know.
CompeerThread starterAuckland, NZ · Oct 27, 2022#31
Originally Posted by remcafee ↑
you also did the fronts right? if you panic stop its gonna be unsafe and the car will wrap itself around
I installed the full rs kit, but even with just the rear it would have been fine, the rears are smaller than standard fronts and have far less braking force. Anyway feels perfectly stable coming to a quick stop at 60km haha but I do need to keep bleeding the system its not quite right yet i can feel air i it sinks a bit if you lay on it so will bleed it a few after a few drives
enviriCT · Oct 28, 2022#32
rears are actually a bit larger in diameter than non-rs fronts (255mm), at 260mmx9mm. its good you upgraded to rs front brakes (275mm)
CompeerThread starterAuckland, NZ · Oct 28, 2022#33
Originally Posted by enviri ↑
rears are actually a bit larger in diameter than non-rs fronts (255mm), at 260mmx9mm. its good you upgraded to rs front brakes (275mm)
Sweet as i thought they were a tiny bit smaller but didnt measure them and had seen on youtube guys just adding the rear discs and so thought it was sweet. I got a full set of RS springs and shocks and spare bushings now, will have a decent parts box.

I changed the trailing arm mount position to the upper one and applied loctite to all the suspension bolts and then I bled the clutch line and that solved the squishy brakes.

Actualy didnt even have to remove the wheels to change the suspension mount point, I just put the car on stands and took the bolts out and used the jack to put it up to the new position, took me longer to put the car on the stands.

I also jacked the trailing arm up BEFORE tightening down the bolts this time so that the trailing arm was preloaded.

the things you learn.

But cars handling way better and now the brakes feel amazing! just need a decent drive to wear the rust off the rotors.

Big thanks to everyone here for the help guys! More mods to come!
enviriCT · Oct 29, 2022#34
just look out for rear beam slapping your chassis over time once its all settled now that you swapped bolt positions, and you are good to go
CompeerThread starterAuckland, NZ · Oct 30, 2022#35
Originally Posted by enviri ↑
just look out for rear beam slapping your chassis over time once its all settled now that you swapped bolt positions, and you are good to go
Im guessing i would hear that, but feels pretty damn good now, like i think the trd suspension is supposed to feel, especially with the 15x7 wheels.

It used to often feel like you were being blown by the wind trying to drive a straight line at 100km/ph before. Like the ass end of the car was a trailer being towed.

Since I put an entire new rear end in I am going to go and have it realigned tomorrow so I know shes all on point again.
remcafeeArizona · Oct 30, 2022#36
it is common that when switching the rear acle mount position, if you have a street setup with somewhat soft springs, you will hit the gas tabk going over bumps, the trd springs are fairly soft and just keep an eye on wear on your gas tank over time, only way to avoid is go sloe over bumps or get stiffer springs
CompeerThread starterAuckland, NZ · Oct 31, 2022#37
Originally Posted by remcafee ↑
it is common that when switching the rear acle mount position, if you have a street setup with somewhat soft springs, you will hit the gas tabk going over bumps, the trd springs are fairly soft and just keep an eye on wear on your gas tank over time, only way to avoid is go sloe over bumps or get stiffer springs
Could put a layer of stick on rubber there or something i guess?
Neinris‘Murica! · Oct 31, 2022#38
Originally Posted by enviri ↑
just look out for rear beam slapping your chassis over time once its all settled now that you swapped bolt positions, and you are good to go
I've never had this issue, and I've had this setup for over a year now. I even had my whole family ride this weekend, wife in the front passenger seat and the two kids in the back. I'm around 180lbs, my wife's around 90lbs, my 10 year old son who sat behind me is about 70lbs, and my 16 year old is about 150lbs. We went over some dips and bumps, I didn't hear or feel any slapping of the rear axle beam on the chassis. I'm on Tein S. Tech lowering springs, and still stock shocks on the back, Bilstein B8s struts up front.
CompeerThread starterAuckland, NZ · Nov 1, 2022#39
Originally Posted by Neinris ↑
I've never had this issue, and I've had this setup for over a year now. I even had my whole family ride this weekend, wife in the front passenger seat and the two kids in the back. I'm around 180lbs, my wife's around 90lbs, my 10 year old son who sat behind me is about 70lbs, and my 16 year old is about 150lbs. We went over some dips and bumps, I didn't hear or feel any slapping of the rear axle beam on the chassis. I'm on Tein S. Tech lowering springs, and still stock shocks on the back, Bilstein B8s struts up front.
I had the entire rear subframe, 2 tonne jack, front old hubs and, springs shocks and jack stands and tool box in the back after i was done and just check no marks from slappage, so Idk it had like twice the weight in the rear and didnt touch. If it does i will buy the stick on rubber pads.
CompeerThread starterAuckland, NZ · Jan 6, 2023#40
Originally Posted by remcafee ↑
it is common that when switching the rear acle mount position, if you have a street setup with somewhat soft springs, you will hit the gas tabk going over bumps, the trd springs are fairly soft and just keep an eye on wear on your gas tank over time, only way to avoid is go sloe over bumps or get stiffer springs
Ok so after hitting some bumps a little to hard and hearing the clank and then reading more on threads here I found someone saying they thought it was the brake hose bracket that hit and not the fuel tank, I have had a look and they are right. Not sure how I did not notice this before.

Picture not included in this copy
Yes those are contact marks above the brake hose on the chassis rail.

Originally Posted by enviri ↑
just look out for rear beam slapping your chassis over time once its all settled now that you swapped bolt positions, and you are good to go
I will be going back to the normal lower suspension mount holes. This is not a safe mod at all. a larger than normal bump in the road will crush the brake hose or severe it.

This is 100% a MOTORSPORT ONLY modification that requires relocation of your brake lines.

Just thinking about this the upper hole is not on there for motorsport, toyota would never do that this is for the 1.3 litre 4wd vitz, it has a rear diff and drive shaft that needs to clear the rear subframe and has a different rear subframe again to the RS/base along with a different fuel tank. The 4wd are always automatic 1.3 litre 4 speed auto and kinda rare.

No more recommending this to people everyone.

Edit: the 4wd vitz are 2nz-fe not the 1sz-fe.
sh0rtlifepacific north WET · Jan 6, 2023#41
actualy the 4wds are not rare..they just never left japan......every time ive looked thru at them for importing theres atleast a couple up for sale..and CHEEP...if someone told me i could swap the 1.5 onto the 4wd trans with 100% certanty id have pulled the trigger on one
CompeerThread starterAuckland, NZ · Jan 8, 2023#42
Originally Posted by sh0rtlife ↑
actualy the 4wds are not rare..they just never left japan......every time ive looked thru at them for importing theres atleast a couple up for sale..and CHEEP...if someone told me i could swap the 1.5 onto the 4wd trans with 100% certanty id have pulled the trigger on one
I have not seen a 4wd older one for sale or wrecking for parts here yet so idk rare in my experience so far. I keep looking because I want to see if you can get a manual corolla carib 4wd box to work with it which would make for a really fun car to drive.

Also I will take more pics when I change the suspension back to lower mount holes to show the contact points and why not to change the suspension mounting points.
sh0rtlifepacific north WET · Jan 8, 2023#43
youve got my attention with that..which rolla box? and assume said rolla box would mean 1.5 or 1.8 swap too?

the exporters ALWAYS have a few of em listed tho there isnt always good pic's...ive come across a few of the listings tho that had pics galore , and can state with some certanty that the driveshaft runs right down the center of the car and connects to what looks like an old toyota pickup axle...but like i said, the fact that they all have a teeny tiny engine has kept me from pulling the trigger as no one seems to know anything about the trans or swapability
but lets face it the chassis will take whatever we want, its a question of "how" do you keep the 4wd...so what trans were you thinking?...i mean hell at that point you wouldnt need a factory 4wd unit, you would need a rear axle, driveshaft and trans and rear axle mounting
enviriCT · Jan 9, 2023#44
Originally Posted by Compeer ↑
Ok so after hitting some bumps a little to hard and hearing the clank and then reading more on threads here I found someone saying they thought it was the brake hose bracket that hit and not the fuel tank, I have had a look and they are right. Not sure how I did not notice this before.

I will be going back to the normal lower suspension mount holes. This is not a safe mod at all. a larger than normal bump in the road will crush the brake hose or severe it.

This is 100% a MOTORSPORT ONLY modification that requires relocation of your brake lines.

No more recommending this to people everyone.
a man of reason. good stuff. I didnt like swapping mount holes either. I already fear the rust monster, and I dont want another thing to fear. 11+ years and still going strong since rear disc swap!
CompeerThread starterAuckland, NZ · Jan 12, 2023#45
Originally Posted by enviri ↑
a man of reason. good stuff. I didnt like swapping mount holes either. I already fear the rust monster, and I dont want another thing to fear. 11+ years and still going strong since rear disc swap!
haha right me too even with my body in such good shape, I still am anti rusting anything that looks remotely like it might start to rust
Neinris‘Murica! · Jan 18, 2023#46
Originally Posted by Compeer ↑
Ok so after hitting some bumps a little to hard and hearing the clank and then reading more on threads here I found someone saying they thought it was the brake hose bracket that hit and not the fuel tank, I have had a look and they are right. Not sure how I did not notice this before.
I haven't been here for a bit. Hmmm... Thanks for pointing it out... I'm currently on work travel, I'll check mine out when I get home.
CompeerThread starterAuckland, NZ · Jan 19, 2023#47
Originally Posted by Neinris ↑
I haven't been here for a bit. Hmmm... Thanks for pointing it out... I'm currently on work travel, I'll check mine out when I get home.
Yes...there have been some developments Bit of hard driving produced some unwanted results lol

Also Im slowly ticking off the things needed for some light autoX racing in the future and on the list was the brake pads and rotors.

The brake upgrade came with spme unknown chinese brand "CAC" brake pads and had some rust spots and scratches on the braking surface even after some heavy footed stops and lively driving through the windys for 6 hours and I don't pad slap and so the rotors are at the brake shop getting machined and I have ordered some Bosch pads.

I still get a staff discount at one of the part stores and so thats what pushed me towards the Bosch Blue pads at $117 front and rear versus Toyota which was $267 front and rear.

What type of brake pads do you guys run? and what have you used for competition racing?
sh0rtlifepacific north WET · Jan 19, 2023#48
i just killed off the "new" sed of pads from my rotor swap, they didnt last long and i didnt expect them to, swapped out for full ceramic..so far so good

i would personaly run "hawk" but the price hurts
CompeerThread starterAuckland, NZ · Jan 20, 2023#49
Originally Posted by sh0rtlife ↑
i just killed off the "new" sed of pads from my rotor swap, they didnt last long and i didnt expect them to, swapped out for full ceramic..so far so good

i would personaly run "hawk" but the price hurts
I have personally not seen Hawk for sale over here, We have EBC race brakes here in Auckland and maybe in the future I will go this route if it seems needed.

Got the job done today anyway guys after my pads and rotors arrived this morning, They barely skimmed 0.5mm from my rotors and they are mint again, New Bosch semi metalic pads feeling great already.

Picture not included in this copy

Picture not included in this copy

Also check out how terrible these "CAC" brand brake pads were. Front left was normal looking while the right is half glazed as seen below.
Picture not included in this copy

And the back left and right are far worse.
Picture not included in this copy Picture not included in this copy

...and now I need to repaint the wheels as they keep chipping. 😎
sh0rtlifepacific north WET · Jan 20, 2023#50
hawk being a race company isnt one of those things youll see on a shelf..well..anywhere

ive run a few grades of their pads in my alfas and the pads were worth every over priced penny, but i havnt been able to justify it for the yaris...yet