I know that the torque value is 160 flbs for the front hub Axle nut but was wondering if you stretch the nut first like other vehicles. On some vehicles you go up to 180-200, (that stretches the nut) then come back one complete turn , then torque back to the desired value. Or is this just a strait 160 torque and stake the edge, leave alone?
Front hub Axle nut torque process
3 posts · 11,950 views
Replies 2
The series 3 service manual just says that the threads should be cleaned first with a non-residue solvent, and to keep the threads free of oil and foreign objects.
It just gives the torque value, then says to stake the nut with a chisel and hammer.
Edit: fixed typos.
It just gives the torque value, then says to stake the nut with a chisel and hammer.
Edit: fixed typos.
hey thanks for the input. i guess it's just a strait 160 flb torque/stake. I'm replacing my front bearing tomorrow , it'll be a first time evolution for me of pressing out and pressing in the new bearings, fun fun fun.Originally Posted by kevinj93 ↑The service manual just says that the threads should be leaned first with a non-residue solvent, kand to keep the threads free of oil and foreign objects.
It just gives the torque value, then says to stake the nut with a chisel and hammer.