CalrenmanOriginal postSo. Cal. Ventura · Apr 2, 2022#1Hello
Does anyone have any idea about part interchange ability between yaris generations?
I have a 2015 and nobody has aftermarket frame braces or strut/ shock tower braces. The pics look the same except for the mounts on the shocks.
I would love to start a sticky on parts interchangeability.
First example is the sway bar from the 2013. The PTR11-52071 is supposed to bolt right up. I am installing one on my 2015 Le 5 door hatch.
What else can I get away with?
Replies 25
mitch9521Red Deer, AB · Apr 2, 2022#2Pretty much anything suspension-wise from a 2nd gen(06-11) will bolt into a 3rd gen hatchback(12-19).
CalrenmanThread starterSo. Cal. Ventura · Apr 3, 2022#3Thanks Mitch.
Originally Posted by
mitch9521 ↑ Pretty much anything suspension-wise from a 2nd gen(06-11) will bolt into a 3rd gen hatchback(12-19).
I thought the shock mounts and front strut tower are different (I want to install a strut tower brace.).
mitch9521Red Deer, AB · Apr 3, 2022#4 Originally Posted by
Calrenman ↑ Thanks Mitch.
I thought the shock mounts and front strut tower are different (I want to install a strut tower brace.).
I have a Tanabe strut bar ready to go onto my car next weekend when I swap onto my summer wheels and the part number is the same between the NCP91(2nd gen hatch) and NCP131(3rd gen).
CalrenmanThread starterSo. Cal. Ventura · Apr 5, 2022#5Let me know how it works. I have not purchased the strut bat yet.
I am looking at the "Front Strut Bar for 2006-2020 Toyota Yaris XP90 XP150 1.5 Hatchback Ultra Racing" (link below). Have you had any experience or heard any reviews with this company's gear? 🤷 The braces look stout!
I put a "horn brace" and a urethane suspension on my hatch back 3cyl./5 speed 1998 GEO Metro. It was fun in the canyons here in L.A./ Ventura. 0 to 60 in under an hour! 🤘
https://www.ebay.com/itm/11519063749...4AAOSwL2hh4PVT Originally Posted by
mitch9521 ↑ I have a Tanabe strut bar ready to go onto my car next weekend when I swap onto my summer wheels and the part number is the same between the NCP91(2nd gen hatch) and NCP131(3rd gen).
mitch9521Red Deer, AB · Apr 6, 2022#6 Originally Posted by
Calrenman ↑ Let me know how it works. I have not purchased the strut bat yet.
I am looking at the "Front Strut Bar for 2006-2020 Toyota Yaris XP90 XP150 1.5 Hatchback Ultra Racing" (link below). Have you had any experience or heard any reviews with this company's gear? 🤷 The braces look stout!
I put a "horn brace" and a urethane suspension on my hatch back 3cyl./5 speed 1998 GEO Metro. It was fun in the canyons here in L.A./ Ventura. 0 to 60 in under an hour! 🤘
https://www.ebay.com/itm/11519063749...4AAOSwL2hh4PVT
I have an Ultra Racing strut bar for a 91-99 Tercel/Paseo in my shed that is unopened but other than that I have no experience with them.
They seem to be fairly decent for one that is non-adjustable. I recommend the Tanabe one, you can adjust it.
CalrenmanThread starterSo. Cal. Ventura · Apr 6, 2022#7What does the adjustment do? Camber? Or just stiffen the ride?
Is the tanabe four bolts or two?
Do you have a part # or link handy?
I am new to the mods on this car. My car has been in a fender bender so adjustment may be a good call. Car tracks well. I cannot wait to put the sway bar on. The freeway is wobbly in the wind.
Thanks for the heads up.
mitch9521Red Deer, AB · Apr 7, 2022#8 Originally Posted by
Calrenman ↑ What does the adjustment do? Camber? Or just stiffen the ride?
Is the tanabe four bolts or two?
Do you have a part # or link handy?
I am new to the mods on this car. My car has been in a fender bender so adjustment may be a good call. Car tracks well. I cannot wait to put the sway bar on. The freeway is wobbly in the wind.
Thanks for the heads up.
Tanabe part number should be: NST45.
I got mine from RHDJapan.
This link should help you:
Tanabe Strut Tower Bar Install & Review [pics!] CalrenmanThread starterSo. Cal. Ventura · Apr 7, 2022#9Thank you Mitch.
CalrenmanThread starterSo. Cal. Ventura · Apr 15, 2022#10Hello Mitch. Did you install the bar yet?
Is there a difference?
Originally Posted by
mitch9521 ↑
mitch9521Red Deer, AB · Apr 15, 2022#11 Originally Posted by
Calrenman ↑ Hello Mitch. Did you install the bar yet?
Is there a difference?
No I ran out of time and didn't get around to installing the strut bar. Its on the list lol.
Planning a wedding eats up alot of time. 🙄
On the other hand, my exhaust came in from Japan so I get to install that too at some point 😁
CalrenmanThread starterSo. Cal. Ventura · Apr 15, 2022#12did you get a "cat back" exhaust? Good luck with the wedding.
Originally Posted by
mitch9521 ↑ No I ran out of time and didn't get around to installing the strut bar. Its on the list lol.
Planning a wedding eats up alot of time. 🙄
On the other hand, my exhaust came in from Japan so I get to install that too at some point 😁
mitch9521Red Deer, AB · Apr 16, 2022#13 Originally Posted by
Calrenman ↑ did you get a "cat back" exhaust? Good luck with the wedding.
Yes. I got a Fujitsubo Authorize RM from Japan.
mitch9521Red Deer, AB · Apr 21, 2022#14 Originally Posted by
Calrenman ↑ did you get a "cat back" exhaust? Good luck with the wedding.
Here is the strut bar, fits like a glove. Mounting the brackets is a pain, there isn't enough clearance between the bolt and strut assembly for a socket/extension so it requires alot of patience but other than that it fit perfectly. Might be easier if you remove the wiper cowl but I did not. 👍
Picture not included in this copy Picture not included in this copy CalrenmanThread starterSo. Cal. Ventura · Apr 27, 2022#15It looks nice. A whole lot of Quarter turns... sucky! I will probably drop the strut. The 2015s had a recall for the strut bearings. So I will check them. Your car looks good!
Did you "tune" the front end or just put the bar in snug?
Originally Posted by
mitch9521 ↑ Here is the strut bar, fits like a glove. Mounting the brackets is a pain, there isn't enough clearance between the bolt and strut assembly for a socket/extension so it requires alot of patience but other than that it fit perfectly. Might be easier if you remove the wiper cowl but I did not. 👍
Picture not included in this copy
Picture not included in this copy
mitch9521Red Deer, AB · Apr 27, 2022#16 Originally Posted by
Calrenman ↑ It looks nice. A whole lot of Quarter turns... sucky! I will probably drop the strut. The 2015s had a recall for the strut bearings. So I will check them. Your car looks good!
Did you "tune" the front end or just put the bar in snug?
You're supposed to snug up the bar while the front wheels are still off the ground so thats what I did. IMO its more of a show piece than an "upgrade" for normal driving, it seems to help with body roll when you're cornering hard though, especially coupled with the TRD rear sway bar.
CalrenmanThread starterSo. Cal. Ventura · Apr 28, 2022#17I like the look of it. I do ride hard in the canyons here in So. Cal so I might get some bang for the buck!
Originally Posted by
mitch9521 ↑ You're supposed to snug up the bar while the front wheels are still off the ground so thats what I did. IMO its more of a show piece than an "upgrade" for normal driving, it seems to help with body roll when you're cornering hard though, especially coupled with the TRD rear sway bar.
CalrenmanThread starterSo. Cal. Ventura · Jun 3, 2023#18I installed the sway bar and some rubber spring spacers that firmed the ride up and it tracks completely "true" now.
The slop in the rear axle/ trailing arm is gone! TRD sway bar is the way to go!
I also installed a trailer hitch for a bike rack that seemed to stiffen it up too.
I may have made contact with a Japanese Manufacturer of frame and body braces for test fitting some braces on the 2015 Yaris 3rd gen with an automatic. It may help get parts lists "UPDATED" and expanded. I will go to their shop at the end of the month. I will figure how to get pictures and video up to share results.
CalrenmanThread starterSo. Cal. Ventura · Jun 12, 2023#19I found what Mitch posted here has been true 2nd gen works on 3rd gen.
Originally Posted by
mitch9521 ↑ Pretty much anything suspension-wise from a 2nd gen(06-11) will bolt into a 3rd gen hatchback(12-19).
CalrenmanThread starterSo. Cal. Ventura · Jul 2, 2023#20CalrenmanThread starterSo. Cal. Ventura · Jul 2, 2023#21CalrenmanThread starterSo. Cal. Ventura · Jul 15, 2023#22CalrenmanThread starterSo. Cal. Ventura · Jul 23, 2023#23I am very impressed with the Cusco subframe brace. My car handles so much better. Well worth the money!
CalrenmanThread starterSo. Cal. Ventura · Oct 7, 2023#24 Originally Posted by Ryan23 ↑
Just put trd springs and sway bar on my 18 box says only good to 11
I am going to get some rear Cusco Frame Braces for the rear axle mounts in a few days. They were only listed for yaris 2011-14. The engineer checked the measurements and they are good for my 2015.🤘
CalrenmanThread starterSo. Cal. Ventura · Oct 25, 2023#25CalrenmanThread starterSo. Cal. Ventura · Oct 25, 2023#26