NeinrisOriginal post‘Murica! · Mar 10, 2022#1I’ve been busy lately and haven’t been here much. Just wanted to share this if it hasn’t been posted yet:
https://youtu.be/cARvU7jiffM It’s crazy, rev limit is OVER 9000!!!
I paused the video to where the rev is at 6600, and it’s doing around 179HP.
My thoughts, get the cam shafts, use the 13:1 pistons from 1NZ-FXE (Prius C), upgrade intake and exhaust, and find someone who can tune the ECU or buy a stand alone.
I know this guy have cracked the Toyota ECU:
https://youtube.com/c/FrankensteinMotorworksReplies 8
lani100Netherlands · Mar 10, 2022#2Remember this is a fully built race spec engine. With proper management etc.
NeinrisThread starter‘Murica! · Mar 12, 2022#3 Originally Posted by
lani100 ↑ Remember this is a fully built race spec engine. With proper management etc.
Understood... Just showing the possibilities. My point was 6800 RPM seems really conservative for this engine.
mitch9521Red Deer, AB · Mar 13, 2022#4Thats incredibly impressive considering this is made to be an economical grocery getter engine.
Originally Posted by
Neinris ↑ Understood... Just showing the possibilities. My point was 6800 RPM seems really conservative for this engine.
Also there is a guy in here with a high compression 1NZ-FE/FXE build that spins his to like 8600 on the stock rotating assembly. Its doable if you've got the flow mods to justify such high RPM.
RomanDaveNew Zealand · Mar 23, 2022#5 Originally Posted by
mitch9521 ↑ Also there is a guy in here with a high compression 1NZ-FE/FXE build that spins his to like 8600 on the stock rotating assembly. Its doable if you've got the flow mods to justify such high RPM.
I'm running a 9000rpm limiter now... so far so good haha
xnamerxxso cal · Mar 23, 2022#6I'm not sure this dyno is real, the tq\hp numbers don't cross at 5250.
Those power numbers are def possible as I got up there with a stock intake manifold\tb and head, but I don't know how much I believe what was posted on the video.
mitch9521Red Deer, AB · Mar 24, 2022#7 Originally Posted by
RomanDave ↑ I'm running a 9000rpm limiter now... so far so good haha
How is it at lower/daily driving RPM? Is it like a B16 where its basically useless under 3500rpm?
CompeerAuckland, NZ · Oct 3, 2022#8205hp Na 1nzfe would be nuts..No traction at all!
enviriCT · Oct 12, 2022#9i mean, look at all the toyota probox tuners with their modded n/a tune 1nz lol