Yarisworld Archive

Cold start noise: worn out alternator bearings? 2006 2SZ-FE

4 posts · 4,891 views

ThinkPadOriginal post- · Jan 8, 2021#1
New year, new noises/defects.

https://youtu.be/t8LSnVCurLw

Cold starting the engine on a winter morning (2℃ / 35℉) produced this noise. I suspect this might be the bearings of the alternator? After the engine was warmed up a bit i didn't hear it anymore. I have driven around 40 mins on the highway and thus the engine was warmed up nicely. It ran smooth without any weird noises.

Replies 3

ex-x-fireSheboygan Falls, Wi. · Jan 8, 2021#2
Some engines are noisy when they are very cold, you can remove the belt and try it out. Then listen to see if the noise is gone.
nortonfbmotown · Jan 8, 2021#3
Belt slipping
ThinkPadThread starter- · Jan 8, 2021#4
Originally Posted by nortonfb ↑
Belt slipping
Sounds plausible, as the belt was squealing a little bit a few weeks ago when the A/C compressor got engaged.

I will loosen the tension on the belt so i can rotate the pulleys etc. by hand to check them. And if those seem ok i will tighten the belt again.