06YarisRSOriginal postFredericton, New Brunswick, Canada · Jun 7, 2020#1Picture not included in this copy
For those in the know, is there expected to be any adverse effects if I am to remove the little 1/2 screen that is moulded into the throttle body o-ring? I am solely interested in doing this to improve my atomized water/methanol delivery into the throttle body. Any obstruction whatsoever starts to bring the water methanol mixture out of suspension.
I am also toying with 2 ideas: 1) install a throttle body spacer and spray directly into the manifold or 2) direct port injection - one 30cc/min nozzle in each runner, close to the head.
Replies 6
Neinris‘Murica! · Jun 7, 2020#2I thought it's only there so that the throttle flap don't go over past parallel? Not sure, I'm probably wrong. Maybe you can remove the first layer with the screen? Actually I might do that, since I'm gonna go with the 1ZZ TB for now since I don't have the $$$ for the engine swap yet.
Kaotic LazagnaCentral Valley, CA · Jun 8, 2020#3I believe those honeycombs are there to straighten out the air or something like that so that the MAF sensor has an accurate reading. Not 100% sure on that tho. But I think that's also the same reason why K&N had some kind of flap in their intake pipe.
06YarisRSThread starterFredericton, New Brunswick, Canada · Jun 8, 2020#4 Originally Posted by
Neinris ↑ I thought it's only there so that the throttle flap don't go over past parallel? Not sure, I'm probably wrong. Maybe you can remove the first layer with the screen? Actually I might do that, since I'm gonna go with the 1ZZ TB for now since I don't have the $$$ for the engine swap yet.
Thanks! Yeah, I'd like to remove it. I was thinking I might use something like my Dremel tool to carefully cut it away. Maybe I should have a replacement on hand. Lol.
06YarisRSThread starterFredericton, New Brunswick, Canada · Jun 8, 2020#5 Originally Posted by
Kaotic Lazagna ↑ I believe those honeycombs are there to straighten out the air or something like that so that the MAF sensor has an accurate reading. Not 100% sure on that tho. But I think that's also the same reason why K&N had some kind of flap in their intake pipe.
I believe you are correct. Hopefully removing it won't cause erroneous readings.
CrankyOldManWest Michigan · Jun 9, 2020#606YarisRSThread starterFredericton, New Brunswick, Canada · Jun 9, 2020#7 Originally Posted by
CrankyOldMan ↑
Interesting reading. I wonder about the spark arrestor function as it only covers about 1/3 of the opening. But, for sure, Toyota put it there for a reason. I think I'll leave it in place.