Yarisworld Archive

MCM's 2ZR swap

88 posts · 104,423 views · page 1 of 2

Replies 87

CrankyOldManWest Michigan · Dec 26, 2019#2
It would be silly if they're not. The overall attitude of the build being "we don't know if it will work" or "there are rumors on the internet that it can be done" is a bit offputting thought it was almost certainly done on purpose to keep people watching.

We've busted our asses over here to prove that it can be done many times. It would be nice to get acknowledgement for the work we've done, even if only a nod. "A certain Yaris-based online community has well documented evidence that it can be done" or something. /rant
myfirstyotaToronto Canada · Dec 26, 2019#3
You're welcome!
kevinj93Sydney, Australia · Dec 26, 2019#4
Not an easy mod here in Australia. The xD was never sold here so the required engine mount needs to be sourced from overseas, or fabricated like MCM did.

The local authorities don't look kindly on engine swaps or modifications. If the vehicle's power is increased by more than 20%, the vehicle needs to be certified by an approved engineer that it is safe and meets pollution control limits.
stidnamAustralia · Dec 26, 2019#5
It's not too hard to source the parts. They can all be obtained through North Shore Toyota in NZ and shipped over :). Though it's a 4 - 6 week wait.

The MCM guys would have clearly read through the main 2ZR threads on this forum to glean what they needed to do. I could have even supplied them my 2ZR engine mount and cooling system hoses etc at replacement cost if the opportunity had arisen.

Given the immobiliser computer was plug and play, I bet they could have even got away with registering the corolla ECU to the Yaris immobiliser computer in the same way Adam did. No dodgy key jiggery then.

They didn't really cover what they did with the exhaust, but I'm assuming they used the cat and down pipe from the Corolla and then welded on the 2" pipe from there.

Would be interesting to see how they wired in the radiator fan and whether they used the corolla fan controller.

All in all, good on em. I hope they read this thread as well, and if they do, please hook a haltech elite 1500 up to it and turbo it!
LeegamerAshland, VA · Dec 27, 2019#6
Awesome episode
malibuguyWestminster, MD · Dec 27, 2019#7
I enjoyed it. Adds to thinking about sticking this motor in my 4dr tercel
LeegamerAshland, VA · Dec 30, 2019#8
It has renewed my interest in doing the swap. I have to get my Z31 put back together first, though so I can have something else to drive while the yaris is down.
ern-dizCA all day · Dec 30, 2019#9
Originally Posted by CrankyOldMan ↑
It would be silly if they're not. The overall attitude of the build being "we don't know if it will work" or "there are rumors on the internet that it can be done" is a bit offputting thought it was almost certainly done on purpose to keep people watching.

We've busted our asses over here to prove that it can be done many times. It would be nice to get acknowledgement for the work we've done, even if only a nod. "A certain Yaris-based online community has well documented evidence that it can be done" or something. /rant
+1000000

Not that I had anything to do with that swap's R&D, but the point is valid.
06YarisRSFredericton, New Brunswick, Canada · Dec 30, 2019#10
Originally Posted by CrankyOldMan ↑
It would be silly if they're not. The overall attitude of the build being "we don't know if it will work" or "there are rumors on the internet that it can be done" is a bit offputting thought it was almost certainly done on purpose to keep people watching.

We've busted our asses over here to prove that it can be done many times. It would be nice to get acknowledgement for the work we've done, even if only a nod. "A certain Yaris-based online community has well documented evidence that it can be done" or something. /rant
I think we should comment on their video. I'd just love to mention that if they want even more HP, drop a turbo on the 2ZR. I think I might post, and mention YW.

EDIT: I posted giving credit where credit is due. Also a little plug for my car. 😛
myfirstyotaToronto Canada · Dec 31, 2019#11
Originally Posted by 06YarisRS ↑
I think we should comment on their video. I'd just love to mention that if they want even more HP, drop a turbo on the 2ZR. I think I might post, and mention YW.

EDIT: I posted giving credit where credit is due. Also a little plug for my car. 😛
Atta boy!
CrankyOldManWest Michigan · Jan 2, 2020#12
Originally Posted by kevinj93 ↑
Not an easy mod here in Australia. The xD was never sold here so the required engine mount needs to be sourced from overseas, or fabricated like MCM did.

The local authorities don't look kindly on engine swaps or modifications. If the vehicle's power is increased by more than 20%, the vehicle needs to be certified by an approved engineer that it is safe and meets pollution control limits.
But if the goal is an offroad/track toy, there shouldn't be anything stopping you. =)
kevinj93Sydney, Australia · Jan 2, 2020#13
Originally Posted by CrankyOldMan ↑
But if the goal is an offroad/track toy, there shouldn't be anything stopping you. =)
It's my daily driver and tow car for my sailing boat. We get the real Yaris here in Australia, currently only available as a 4 door hatchback. The local tow hitch manufacturers state their hitches do not fit the current model due to the different rear bumper to earlier models, so I will wait and see if a tow hitch is available for the GR Yaris due to arrive late this year...
fredovvtiSabana Grande, PR · Jan 22, 2020#14
They make another video installing a turbo from ebay to Yaris Hiltom
eTiMaGoThread starterBangkok, Thailand · Jan 22, 2020#15
Originally Posted by fredovvti ↑
They make another video installing a turbo from ebay to Yaris Hiltom
Pretty good video, does show how much "easier" a pre-made kit can be!

I had a good laugh in the beginning when Marty said something like "Yaris guys will be sure to let us know", a possible dig at this thread? 😆

Anyway, will be really interesting to see how they work out the engine management, really looking forward to the next part!
CrankyOldManWest Michigan · Jan 22, 2020#16
I was pretty excited to see it as well. I'm also interested in their engine management choice since I might want to go standalone on my track toy some day.
mitch9521Red Deer, AB · Jan 22, 2020#17
I'm very curious to see what numbers its gonna put down on the dyno.
LeegamerAshland, VA · Jan 22, 2020#18
I'm sure they'll use haltech.
06YarisRSFredericton, New Brunswick, Canada · Jan 22, 2020#19
Originally Posted by mitch9521 ↑
I'm very curious to see what numbers its gonna put down on the dyno.
Me too! To soon to guess without knowing management and tune/boost etc. I wonder if they'll push it up to around 10 - 12 psi. Definitely subscribed.
eTiMaGoThread starterBangkok, Thailand · Jan 24, 2020#20
Originally Posted by Leegamer ↑
I'm sure they'll use haltech.
Yep, I think I heard them mention it. And anyway, who else would they use? 😁
06YarisRSFredericton, New Brunswick, Canada · Jan 24, 2020#21
Originally Posted by eTiMaGo ↑
Yep, I think I heard them mention it. And anyway, who else would they use? 😁
Haha. Is Haltech an Aussie product? Did we talk before about the ECUMaster Black?
myfirstyotaToronto Canada · Jan 24, 2020#22
Originally Posted by 06YarisRS ↑
Haha. Is Haltech an Aussie product? Did we talk before about the ECUMaster Black?
Pretty sure haltech is Australian
tmontagueCaledonia Ont. · Jan 24, 2020#23
Haltech seems to be the real deal but the price also reflects that. I've been eyeing the ecumaster stuff lately, price of very good for what they offer
eTiMaGoThread starterBangkok, Thailand · Jan 25, 2020#24
Haltech is Australian, they also sponsor and work closely with the MCM guys, so it's only natural they will use their products :)

But for us mere mortals, ECUmaster is looking gooood
mitch9521Red Deer, AB · Jan 25, 2020#25
Originally Posted by 06YarisRS ↑
Me too! To soon to guess without knowing management and tune/boost etc. I wonder if they'll push it up to around 10 - 12 psi. Definitely subscribed.
Does the 2ZR-FE have decent rods or are they made of cardboard like the 1NZ and blow up before 10psi?
06YarisRSFredericton, New Brunswick, Canada · Jan 25, 2020#26
Originally Posted by mitch9521 ↑
Does the 2ZR-FE have decent rods or are they made of cardboard like the 1NZ and blow up before 10psi?
All I know is that the MonkeyWrench Racing guys say that there are a lot of stock 2ZR-FE engines with the turbo kit and minimal failures, assuming a good tune. I was inquiring about my transmission's ability to handle the extra torque. They said that over 275 HP the automatic transmissions started to slip. Despite what they said, I personally wouldn't trust it much beyond 220 - 230 HP. I believe that the engines up to 275 HP were not built engines. I deduced that the engine could therefore hold together up to 275 HP. I would feel reasonably comfortable at 250 crank HP with a good tune, good fuel, decent intake temps and not constantly thrashing on it. By extension, my guess is that the engine should handle 12, maybe 14 psi. Again, very good tune, minimal thrashing. All of this is pure supposition on my part, however. That said, I don't think either MWR or Turbokits would be selling these kits (8.6 psi), intended for a stock engine, if there wasn't some headroom there. It could ruin your rep pretty quickly with a lot of early failures.
06YarisRSFredericton, New Brunswick, Canada · Jan 25, 2020#27
Originally Posted by tmontague ↑
Haltech seems to be the real deal but the price also reflects that. I've been eyeing the ecumaster stuff lately, price of very good for what they offer
Yup, the ECUMaster Black looks, at first appearance, to be a good candidate at a reasonable price compared to the Haltech Elite 1500, which I believe is the minimum Haltech unit capable of DBW.
myfirstyotaToronto Canada · Jan 26, 2020#28
I'd figure 275 hp on stock internals would hold up aswell. If lotus can slap a magnuson supercharger on the stock 2zr, tune it to 220 horse and back it with a warranty, it must be able to handle more.
06YarisRSFredericton, New Brunswick, Canada · Jan 26, 2020#29
Originally Posted by myfirstyota ↑
I'd figure 275 hp on stock internals would hold up aswell. If lotus can slap a magnuson supercharger on the stock 2zr, tune it to 220 horse and back it with a warranty, it must be able to handle more.
Excellent point! 👍
mitch9521Red Deer, AB · Jan 26, 2020#30
250hp to the crank is PLENTY in my opinion for these cars, they are super light and FWD. I tend to prefer a well balanced drivable car over an overpowered death trap, but whatever.
tmontagueCaledonia Ont. · Jan 26, 2020#31
Originally Posted by mitch9521 ↑
250hp to the crank is PLENTY in my opinion for these cars, they are super light and FWD. I tend to prefer a well balanced drivable car over an overpowered death trap, but whatever.
I fully agree.
06YarisRSFredericton, New Brunswick, Canada · Jan 26, 2020#32
Originally Posted by mitch9521 ↑
250hp to the crank is PLENTY in my opinion for these cars, they are super light and FWD. I tend to prefer a well balanced drivable car over an overpowered death trap, but whatever.
I am at approximately 170 - 175 wheel now and I can tell you that I wouldn't want any more. Although torque steer isn't a major issue now, wheel spin limits acceleration as it is. As mentioned before, an LSD would go a long way. But, yeah, much more would be wasted and potentially dangerous.
myfirstyotaToronto Canada · Jan 27, 2020#33
Originally Posted by mitch9521 ↑
250hp to the crank is PLENTY in my opinion for these cars, they are super light and FWD. I tend to prefer a well balanced drivable car over an overpowered death trap, but whatever.
Have you ever been in an over powered death trap?
My buddy has a 500+hp golf.... I have no words for that pile of awesomeness
06YarisRSFredericton, New Brunswick, Canada · Jan 29, 2020#34
MCM's new episode is up. I messaged them on their Facebook page asking them if they'd be kind enough to mention my build and give Yarisworld a pump since I'd be hard pressed to believe that they were unaware of all the work and research that's gone on on this site. They appear to be ignoring me. Am I expecting too much? Am I acting like a cry baby here? Would simply recognizing other peoples' contributions be too threatening? Help me out here guys. Give me some perspective.

https://www.youtube.com/watch?v=j6D9pB5Ig9Q
CrankyOldManWest Michigan · Jan 30, 2020#35
I agree that it would be "right" for them to at least give credit for any info they got here, but that's the academic in me. =)

I look at their subscriber count on YT (3M+) and assume that they either have someone else to monitor/screen it or just ignore it entirely. You'd basically have to have their DMs to even show up on their radar. I don't think they'd ignore you out of spite, it's just that the signal to noise ratio on something like that is really poor (i.e. lots of noise).
06YarisRSFredericton, New Brunswick, Canada · Jan 30, 2020#36
Originally Posted by CrankyOldMan ↑
I agree that it would be "right" for them to at least give credit for any info they got here, but that's the academic in me. =)

I look at their subscriber count on YT (3M+) and assume that they either have someone else to monitor/screen it or just ignore it entirely. You'd basically have to have their DMs to even show up on their radar. I don't think they'd ignore you out of spite, it's just that the signal to noise ratio on something like that is really poor (i.e. lots of noise).
Ah Sam. You are wise indeed. What you say makes perfect sense to me. What are "DMs"? Sorry for my ignorance.
eTiMaGoThread starterBangkok, Thailand · Jan 31, 2020#37
Originally Posted by 06YarisRS ↑
MCM's new episode is up. I messaged them on their Facebook page asking them if they'd be kind enough to mention my build and give Yarisworld a pump since I'd be hard pressed to believe that they were unaware of all the work and research that's gone on on this site. They appear to be ignoring me. Am I expecting too much? Am I acting like a cry baby here? Would simply recognizing other peoples' contributions be too threatening? Help me out here guys. Give me some perspective.

https://www.youtube.com/watch?v=j6D9pB5Ig9Q
It is indeed difficult to get in touch, but they do drop in the facebook group on occasion. I did drop several messages about YW and some of the awesome projects here, after they introduced the car...

Anyway, with so many fans, can't be easy to keep up with all messages, I don't take it personally!
CrankyOldManWest Michigan · Jan 31, 2020#38
Originally Posted by 06YarisRS ↑
Ah Sam. You are wise indeed. What you say makes perfect sense to me. What are "DMs"? Sorry for my ignorance.
I'm not so sure about wise, I just learn a lot of things the hard way. =)

It's kidspeak for Direct Messaging. I think there's a distinction in younger generations between instant messaging (IM) as we knew it and DM because things like Twitter and Instagram are both instant messaging but are broadcast to a public audience, whereas something like FB Messenger or your phone number would be private and therefore "direct" to the recipient. Messenger clients on a public page can get billions of hits from bots or spammers so they probably filter a lot of it out.
06YarisRSFredericton, New Brunswick, Canada · Jan 31, 2020#39
Originally Posted by eTiMaGo ↑
It is indeed difficult to get in touch, but they do drop in the facebook group on occasion. I did drop several messages about YW and some of the awesome projects here, after they introduced the car...

Anyway, with so many fans, can't be easy to keep up with all messages, I don't take it personally!
Sounds like you have a very good perspective on this.
06YarisRSFredericton, New Brunswick, Canada · Jan 31, 2020#40
Originally Posted by CrankyOldMan ↑
I'm not so sure about wise, I just learn a lot of things the hard way. =)

It's kidspeak for Direct Messaging. I think there's a distinction in younger generations between instant messaging (IM) as we knew it and DM because things like Twitter and Instagram are both instant messaging but are broadcast to a public audience, whereas something like FB Messenger or your phone number would be private and therefore "direct" to the recipient. Messenger clients on a public page can get billions of hits from bots or spammers so they probably filter a lot of it out.
Thanks for the info. I am woefully lacking in my current understanding of all this stuff.
06YarisRSFredericton, New Brunswick, Canada · Feb 1, 2020#41
Originally Posted by CrankyOldMan ↑
I agree that it would be "right" for them to at least give credit for any info they got here, but that's the academic in me. =)

I look at their subscriber count on YT (3M+) and assume that they either have someone else to monitor/screen it or just ignore it entirely. You'd basically have to have their DMs to even show up on their radar. I don't think they'd ignore you out of spite, it's just that the signal to noise ratio on something like that is really poor (i.e. lots of noise).
Speaking of "noise", for fun I took a few minutes and read some of the replies. I think I may have gotten your point now. A huge percentage of them are people commenting on either duct tape or the fact that a box moved by itself. Seemingly much less interest in the substance of the video as opposed to tidbits of 'humour' or "easter eggs'. Kind of a shame but I guess if that's what the people want, so be it. I never really scrutinized comments in videos before as I guess my interest laid in the content. That's what I like about places like Yarisworld...more pointed discussion/focus and less "noise". It seems that to appeal to a broader audience, and get the subscribers, 'style over substance' seems to be the approach. Don't get me wrong, they have the content, but by adding the 'style', what they gain in subscribers, they lose in depth or at least in the ability to engage in any deeper conversation about the topic. Or, they get the best of both worlds. I am truly naive when it comes to these things. I can be a little slow on the uptake at times, but think that's why some here have expressed that Youtube or Facebook don't hold the appeal when compared to forums, for example.
eTiMaGoThread starterBangkok, Thailand · Feb 1, 2020#42
Originally Posted by 06YarisRS ↑
Speaking of "noise", for fun I took a few minutes and read some of the replies. I think I may have gotten your point now. A huge percentage of them are people commenting on either duct tape or the fact that a box moved by itself. Seemingly much less interest in the substance of the video as opposed to tidbits of 'humour' or "easter eggs'. Kind of a shame but I guess if that's what the people want, so be it. I never really scrutinized comments in videos before as I guess my interest laid in the content. That's what I like about places like Yarisworld...more pointed discussion/focus and less "noise". It seems that to appeal to a broader audience, and get the subscribers, 'style over substance' seems to be the approach. Don't get me wrong, they have the content, but by adding the 'style', what they gain in subscribers, they lose in depth or at least in the ability to engage in any deeper conversation about the topic. Or, they get the best of both worlds. I am truly naive when it comes to these things. I can be a little slow on the uptake at times, but think that's why some here have expressed that Youtube or Facebook don't hold the appeal when compared to forums, for example.
You could try to join their facebook group, while there's also some nonsense there, there are some more technical discussions compared to youtube comments. There's some questions when you try to join, based on the cars they have done on the show, if you are stuck, I could try to help :)
stidnamAustralia · Feb 4, 2020#45
Originally Posted by benoityip ↑
New episode 138kw at the wheels (stock is 70kw)
https://youtu.be/K4UQsAe9-E4
Damnit, you ruined the surprise :P
eTiMaGoThread starterBangkok, Thailand · Feb 4, 2020#46
200hp, not too bad, but looks like they were playing it safe... Which, judging by the after-credits scene, failed miserably!
kevinj93Sydney, Australia · Feb 5, 2020#47
It didn't sound healthy.

They kept mentioning the $169 turbo, but never mentioned the cost of the Haltech ECU.
stidnamAustralia · Feb 5, 2020#48
Originally Posted by kevinj93 ↑
It didn't sound healthy.

They kept mentioning the $169 turbo, but never mentioned the cost of the Haltech ECU.
lol that it did not. I wonder if they found the limit of a 2zr :)
06YarisRSFredericton, New Brunswick, Canada · Feb 5, 2020#49
Originally Posted by stidnam ↑
lol that it did not. I wonder if they found the limit of a 2zr :)
I sure hope that's not the limit. But it was an older engine and you never know what shape it was in originally. I can't see the failure being caused by the Haltach technician. Surely those guys could see detonation coming before it occured. I'd love to see the dyno sheet if it had info on AFR.
LeegamerAshland, VA · Feb 5, 2020#50
Originally Posted by kevinj93 ↑
It didn't sound healthy.

They kept mentioning the $169 turbo, but never mentioned the cost of the Haltech ECU.
Haltech is probably free or very discounted for them.

eBay turbos aren't always bad, but one that cheap is destined to fail. Check out the turbos that the BoostedBoiz and PFI Speed are using from ebay. Several cars making 1000whp with honda K series and ebay turbos pretty reliably.