I'd have done the same. The rear end of the 2020 SE is actually quite handsome.Originally Posted by KALISPEL II ↑I removed the chrome 'COROLLA' badge from rear trunk to clean things up a bit.
I pulled the trigger! - 6-spd Manual 2020 Corolla SE Sedan
95 posts · 42,564 views · page 2 of 2
Replies continued
Funny coincidences on the plate!!
I'm curious what your OCD certified, vibration free install method is?
I'm curious what your OCD certified, vibration free install method is?
I felt padded bottom, back teeth/retainers of frame to ensure that it never makes metal-to-paint contact with car finish, and also have license installed with decently thick small rubber washers behind license (at upper screw holes) to keep plate/frame off car finish up top as well. I have narrow, outdoor-grade 3M double-sided adhesive mounting tape on inside of frame on all four sides to keep plate 100% secure/padded within the frame. Finally, I have outdoor grade adhesive velcro attached to both bottom area of plate backside and car to keep plate 100% secure and vibration free on bottom as well. Even aggressively shutting the trunk doesn't jar/move the license/frame one bit, and the license/frame metal never makes direct contact with my car finish. It was a bitch getting the frame back off my Yaris when I traded her in. 😆 It took some work to get that sucker off.Originally Posted by ern-diz ↑Funny coincidences on the plate!!
I'm curious what your OCD certified, vibration free install method is?
Ha! After hearing the install process, I can totally understand why!Originally Posted by KALISPEL II ↑I felt padded bottom, back teeth/retainers of frame to ensure that it never makes metal-to-paint contact with car finish, and also have license installed with decently thick small rubber washers behind license (at upper screw holes) to keep plate/frame off car finish up top as well. I have narrow, outdoor-grade 3M double-sided adhesive mounting tape on inside of frame on all four sides to keep plate 100% secure/padded within the frame. Finally, I have outdoor grade adhesive velcro attached to both bottom area of plate backside and car to keep plate 100% secure and vibration free on bottom as well. Even aggressively shutting the trunk doesn't jar/move the license/frame one bit, and the license/frame metal never makes direct contact with my car finish. It was a bitch getting the frame back off my Yaris when I traded her in. 😆 It took some work to get that sucker off.
Pulled up behind one of these on the road today. Was surprised how much the rear reminded me of the newer Dodge Darts. Someone on Instagram responded to my comment about that saying it reminded them of the Kia Forte.
For me, your SE trim, with that diffuser on the rear bumper, is the only way to go, though I do still prefer the hatch.
Hmmm... I might do the rear bumper diffuser in black.
First thing I thought of, too. Good looking car, though. Much better than the previous gen.Originally Posted by ern-diz ↑saying it reminded them of the Kia Forte.
Originally Posted by KALISPEL II ↑https://www.bellroadtoyota.com/vehic...KTUD35FA029712
My 2015 Yaris SE for sale at dealership. Poor girl needs a good home. 😢
Looks like she was sold
I went ahead and ordered the Toyota OEM Front Hood Insulation Pad that attaches to the underside of the front hood of my 2020 Corolla SE sedan. Apparently, only the XSE has it as standard equipment. 👎 WTF Toyota? Even my 2015 Yaris SE hatch had that as standard factory equipment (though they did skimp on having no SS exhaust tip for the Yaris). The one on the Yaris was pretty cut-rate though. Pretty lame & cheesy ninja-corner-cutting to reduce costs I guess. So, there goes about $200 more to get it. 😆
I picked up the OEM hood insulator piece & 6 clips today at a local Toyota dealership, since the package dimensions made it too expensive to ship directly to me ($35-40) - especially considering how overpriced it already is before shipping. 😠 Not surprisingly, it takes only a few minutes to install. I still can't believe that this part costs about $260 retail USD$ (Around $200 total for insulator piece & clips after "special internet discount" & taxes). Seriously, this piece of rigid ultra-lightweight molded insulation fiber couldn't have cost more than a few dollars to manufacture. 🙄
I know Toyota reamed me with that sort of pricing, but I had to do it since it bugged me that much. The car just had that unfinished look & feel without it (at least to me it did). I can at least say that the engine now sounds more deep, rich & robust with the insulator piece installed & the RPMs going through their paces while shifting/driving. Before, it had more of a hollow/echo-y sound to it. This really should have been standard equipment on all trims, especially considering it costs Toyota next to nothing to manufacture. Another WTF Toyota moment. 😆
Below are some before & after pics that I took:
Picture not included in this copy
Picture not included in this copy
-
I know Toyota reamed me with that sort of pricing, but I had to do it since it bugged me that much. The car just had that unfinished look & feel without it (at least to me it did). I can at least say that the engine now sounds more deep, rich & robust with the insulator piece installed & the RPMs going through their paces while shifting/driving. Before, it had more of a hollow/echo-y sound to it. This really should have been standard equipment on all trims, especially considering it costs Toyota next to nothing to manufacture. Another WTF Toyota moment. 😆
Below are some before & after pics that I took:
Picture not included in this copy
Picture not included in this copy
-
Looks proper now. Can't believe it didn't come with this standard. Yes, the price was outrageous! Nevertheless, I would have caved and got one as well.
Looks great! I agree, pretty silly that the hood insulator didn't come standard.
Congrats, KALISPEL and Bronsin! Hope you guys have a lot of luck with your new Corollas. I'll help keep the Yaris spirit alive, as I'll be putzing around in my 2010 hopefully for many years to come. Speaking of tech bloat, one (or possibly more than one---who the hell knows) of the tire sensors in my Yaris (would prefer not to have them in the first place) has gone bad. The Toyota dealer I've been going to since 2010 for routine maintenance wants $235 per sensor. Whichever sensor(s) went bad, it did last almost 9 years. So, I suppose it's hard for me to complain too much. But all of these new Toyotas (and new cars in general) with sensors up the wahzoo I can imagine will become quite expensive to repair as sensors go bad. That's one of the things that'll keep me in my Yaris...it's minimalism. Good luck, guys. That's a really beautiful Corolla, KALISPEL.
Hey Kalispel! Just wanted to thank you for answering all my questions. Guess what? I'm officially getting a new Corolla, too! I went to test drive the sedan recently. Had to take my mom along, because I don't know how to drive stick. My mom, who is by no means an auto enthusiast, couldn't stop talking about how much it was a blast to drive the Corolla. I also attempted to drive it around in an empty parking lot as part of the test drive. I was surprised by how easy it was for a total novice. Yes, I stalled numerous times, but for the most part, I was able to competently drive the car around in the parking lot up to second gear. I can definitely say that the Corolla is a great car for those who want to learn to drive a manual.
Ultimately, I decided to get the hatchback, in the SE trim. Because the only thing better than having one hatchback is having two hatchbacks, right? LOL! My Yaris will be getting a big brother. Anyway, because it's hard to find a manual, and the 2020 Corolla hatchback is so new, the dealership had to put in a factory special order for me. The sedan is made in Mississippi, while the hatchback is made in Japan. So, I'll have a little bit of a wait, because the car has to be shipped across the ocean. My new Corolla is scheduled to roll off the assembly line in Japan later this month, and is scheduled to arrive in Ohio in mid-February. Can't wait! I instructed the salesman to leave all the shipping plastic on the car and to not wash it, because I don't want some kid with a sponge grinding dirt into the paint and creating swirl marks. Will update with pics in a couple months once I get the car.
Ultimately, I decided to get the hatchback, in the SE trim. Because the only thing better than having one hatchback is having two hatchbacks, right? LOL! My Yaris will be getting a big brother. Anyway, because it's hard to find a manual, and the 2020 Corolla hatchback is so new, the dealership had to put in a factory special order for me. The sedan is made in Mississippi, while the hatchback is made in Japan. So, I'll have a little bit of a wait, because the car has to be shipped across the ocean. My new Corolla is scheduled to roll off the assembly line in Japan later this month, and is scheduled to arrive in Ohio in mid-February. Can't wait! I instructed the salesman to leave all the shipping plastic on the car and to not wash it, because I don't want some kid with a sponge grinding dirt into the paint and creating swirl marks. Will update with pics in a couple months once I get the car.
Toyota advertises close ratio in the lower few gears . At what upper gear can you tell it's getting into much taller or overdriven territory?
Nu18F - I have the sales brochure in front of me that I got from the dealership. Here's a direct quote out of it:
"Three pedals. Six speeds. One fun drive. Corolla's available 6-speed Intelligent Manual Transmission (iMT) features close-ratio gears down low for spirited acceleration and taller gears up top for optimized fuel economy while cruising. It also incorporates an intelligent rev-matching feature, helping reduce transmission shock when downshifting."
Anyway, that's all it says. Note that the brochure uses "gears" in the plural form for taller gears. So, I'm just going to presume that both 5th and 6th gears are overdrive gears. Anything below that, I don't know at this time.
"Three pedals. Six speeds. One fun drive. Corolla's available 6-speed Intelligent Manual Transmission (iMT) features close-ratio gears down low for spirited acceleration and taller gears up top for optimized fuel economy while cruising. It also incorporates an intelligent rev-matching feature, helping reduce transmission shock when downshifting."
Anyway, that's all it says. Note that the brochure uses "gears" in the plural form for taller gears. So, I'm just going to presume that both 5th and 6th gears are overdrive gears. Anything below that, I don't know at this time.
From what I have observed, 5th gear in the 6-MT Corolla is pretty much the same RPM level as 5th gear was in my 5-MT Yaris while traveling at my usual highway speeds. 6th gear drops it down from the 2800-3000 RPM's of 5th at those speeds to 2200-2300. That is probably one of the reasons why the 800+ pound heavier Corolla can still average close to what my Yaris was doing in MPG (40-41 average thus far versus the 42-43 I was averaging with the Yaris). I would agree that both 5th & 6th on the Corolla have the feel of overdrive gears to them. Gears 1 & 2 are very short & quick to shift out of.Originally Posted by Nu18F ↑Toyota advertises close ratio in the lower few gears . At what upper gear can you tell it's getting into much taller or overdriven territory?
Minus all the stupid tech bloat, the Corolla is a nice car - but I actually liked my 2015 Yaris SE hatch better, overall. It was just more my speed & preference in a lot of ways. I would have jumped at the chance to buy the new 2020 TNGA Yaris hatch over the Corolla if it was offered in the U.S. I don't see myself keeping this Corolla longer than 3-4 years.
Kalispel - I plan to keep the Corolla forever, just like my Yaris. I come from a family that keeps their cars 20+ years, so I don't know any different. Anyway, because I plan to keep the car forever, I ordered the SE trim. I really liked the leather, heated seats of the XSE trim. However, the XSE had an electronic instrument cluster, rather than the physical, analogue gauges of the SE trim. I don't trust a TV screen to last a couple of decades. I'm not pleased with the tech bloat, either. However, I wanted a compact car that didn't have a plain, direct-injection engine, and the Corolla was basically the only option.
I agree. The TNGA innovative combo direct+port 2.0L engine design in the SE/XSE sedan is the only reason I even considered my new 6-MT Corolla, otherwise I might have rolled the dice on a new Mazda3 sedan with regular 6-speed automatic & their SkyActiv direct-inject engine (which is supposed to be the best in terms of straight GDI designs & minimal carbon sludge buildup). I was actually surprised that Toyota carried over the (very reliable) legacy port-injected engine from the previous Corolla gen to the new 2020 Corolla's in non-SE/XSE trims - though shame that they likely ruined the overall reliability of the vehicle with yet another push-belt CVT automatic. Toyota had the most reliable regular automatics on the planet, & it is a shame that they didn't stick with them like Mazda has with their's.Originally Posted by Hamster ↑I'm not pleased with the tech bloat, either. However, I wanted a compact car that didn't have a plain, direct-injection engine, and the Corolla was basically the only option.
Tech bloat, or lack thereof. Thanks to KALISPEL II, I use that term all the time now in describing why I love my Yaris and plan to keep it for the long haul.
I am missing the days of Radio Delete 😆
When I get some free time in early-mid February, I plan to switch up the front "Dragon Red" vinyl mod to my Corolla, in favor of something a bit more low-key, conservative & blending. Going to go with a light/med gray or color-matching white this time around. I will post some pics when the job is completed.Originally Posted by KALISPEL II ↑Here is a pic of the modified front fascia of the car after the small vinyl grill/housing project idea was installed yesterday.
Should I stick with 'SE Red' up front, or switch it to a white that closely matches the color of the paint?
Picture not included in this copy
I'm still sad that the all-new 2020 TNGA Yaris hatchback never made it to the U.S./NA market. 😢 Looks to be a nice little subcompact. My 2020 TNGA Corolla feels like the runner-up consolation prize. 😆
-
I don't think the red looks that bad. In fact I kind of like it.
Not the best setting or lighting, but here is a phone-pic I took at work the other day with the changed-out vinyl color. I like it better, since it is more low-key & conservative, & just generally more my speed. I liked the deep red version also, but it just popped a bit too much for my personal tastes. Just a little something to add a touch of tasteful, factory-looking, customization & individualism to my Corolla - considering that these cars will literally be all over the place soon enough. Plus, I think it looks better when all that solid black/dark-gray up-front from one end to the other is broken up a bit.
Picture not included in this copy
Picture not included in this copy
Nice one. The reflection on the windshield makes this pic extra cool.
I really like it now!
Thanks. I park under some solar panels at work & that is where that grid reflection is coming from. It does look pretty cool reflected off the windshield like that. 😁 The Matrix!Originally Posted by ern-diz ↑Nice one. The reflection on the windshield makes this pic extra cool.
Okay, quick update - I finally got my 2020 Corolla SE hatchback in Classic Silver Metallic! Woohoo! If you want to do a factory order at your dealership, be prepared to wait about three months. The dealership ordered my car in December, and it arrived this month. But that's okay, since I was buying this car for fun, not because I needed it. Right now I'm just learning how to drive it. Stalled it about a zillion times, but I'm slowly getting better and better at consistently finding the bite point. I'm also working on figuring out when to change gears. I'm glad I had the wild idea to buy a brand new car with a manual, even though I didn't know how to drive a manual. Although I suck at driving it right now, I'm still having a blast learning how to drive stick!
Quick way to find the grab/bite point of the clutch is to go on a flat, empty parking lot, and then slowly, and I mean extremely slowly start letting go of the clutch with the trans being in 1st. Don't bother with the gas pedal. Once you start feeling the car lunge forward, fully step on the clutch again and shift back into neutral. Do this 2 or 3 times, and you'll know exactly where the grab point is. Don't do it too many times tho, since I'm sure it's putting some stress on the throw out bearing.Originally Posted by Hamster ↑Okay, quick update - I finally got my 2020 Corolla SE hatchback in Classic Silver Metallic! Woohoo! If you want to do a factory order at your dealership, be prepared to wait about three months. The dealership ordered my car in December, and it arrived this month. But that's okay, since I was buying this car for fun, not because I needed it. Right now I'm just learning how to drive it. Stalled it about a zillion times, but I'm slowly getting better and better at consistently finding the bite point. I'm also working on figuring out when to change gears. I'm glad I had the wild idea to buy a brand new car with a manual, even though I didn't know how to drive a manual. Although I suck at driving it right now, I'm still having a blast learning how to drive stick!
Since you're new to M/T, please do not fully rest your hand's weight on the shifter. Also do not keep the clutch pedal depressed when stopped. Shift into reverse and fully let go of the clutch pedal. Also do not rest your foot on the clutch pedal. Doing all this will prevent unnecessary wear and damage on your car.
I think you mean neutral, not reverse. lol.Originally Posted by Kaotic Lazagna ↑Also do not keep the clutch pedal depressed when stopped. Shift into reverse and fully let go of the clutch pedal.
ROTFLMAO!Originally Posted by Leegamer ↑I think you mean neutral, not reverse. lol.
Good catch. Not sure why I said reverse. Yes, NEUTRAL! hahaha
I just imagine this poor guy pulling up to a red light, throwing it in reverse and dumping the clutch. Made me lolOriginally Posted by Kaotic Lazagna ↑ROTFLMAO!
Good catch. Not sure why I said reverse. Yes, NEUTRAL! hahaha
Thanks for the suggestions! I've been practicing on the residential streets around my house. The speed limit is 25 mph, so I can go at slow speeds and take my time. There are no hills, and there's rarely anyone behind me. Lots of stop signs, where I can practicing stops and starts. Just to be safe, I taped a hand-made sign on my back window with a warning that I'm learning to drive stick and I might stall (I was afraid that otherwise someone might think I'm on a cell phone and start road raging at me). The bite point seems to be 3/4 of the way up the pedal travel. You can definitely feel it, since the car feels more "solid." Once the bite point is reached, the car will not move forward on its own if you don't give it gas. Apparently some cars will move forward on its own, but not this one. The Corolla will move a couple inches then shut off. Anyway, as a beginner, it's challenging to properly balance the amount of gas, plus the speed to fully release the clutch pedal. But the more time I spend behind the wheel, the fewer times I stall. I'm also getting better at shifting through the gears smoothly. There are a bunch of really helpful YouTube videos about how to drive stick, so I've been watching those over and over. And, of course, I still have my automatic Yaris, so I'm not stressing out about how long it will take me to master a manual.
And don't worry, I'm not resting my hand on the shifter, and I'm not using the clutch as a footrest :). I know that doing both those things are super bad. Also, good thing you mentioned not to keep the clutch depressed when stopped. That's what my mom taught me to do (I had a couple hours of in-car instruction with her in my dad's car, but now I'm on my own with my new Corolla). But turns out she's wrong. What I've been doing now is shifting to neutral and coasting a few feet shortly before I reach the stop sign. Less strain on my legs, too.
And don't worry, I'm not resting my hand on the shifter, and I'm not using the clutch as a footrest :). I know that doing both those things are super bad. Also, good thing you mentioned not to keep the clutch depressed when stopped. That's what my mom taught me to do (I had a couple hours of in-car instruction with her in my dad's car, but now I'm on my own with my new Corolla). But turns out she's wrong. What I've been doing now is shifting to neutral and coasting a few feet shortly before I reach the stop sign. Less strain on my legs, too.
This. 🎉Originally Posted by Hamster ↑Because the only thing better than having one hatchback is having two hatchbacks, right?
Nice vinyl mod! Breaking up the black trim pieces looks much better. Smart!
I realized I haven't posted an update on my new Corolla. All I can say is....Wow, if you ever wanted to learn to drive stick shift, this is the car for you! It was super easy to learn to drive this thing. I taught myself just by watching YouTube videos. Yeah, at first, it really sucked when I stalled a lot. But after I learned to find where the clutch bites, everything came super easy after that. Earlier this year, I couldn't drive a manual at all, now I find it as easy as driving an automatic. Well, except in traffic, of course. :) If I have to go somewhere during rush hour, I'll drive my automatic Yaris.
What I really like about this car is two "cheat" features for inclines and hills. The new Corolla has a brake hold feature, which uses the ABS system so you don't need to hold down the brake pedal while at a stop. This same feature works great if you are on a slight incline. No rolling backwards, just clutch down, shift into first, give it some gas, and the brakes will automatically release, you don't need to do anything extra. For steeper inclines or hills, you can use the electronic parking brake. Clutch down, shift into first, give it some gas, and the parking brake will automatically release once you get moving. No danger of rolling back even an inch, so no need to freak out if someone is right on your bumper. And the rev match feature works perfectly, too! Makes downshifting so smooth. Overall, I am very pleased with this car! I'm glad Toyota designed this car to be so easy for beginners.
What I really like about this car is two "cheat" features for inclines and hills. The new Corolla has a brake hold feature, which uses the ABS system so you don't need to hold down the brake pedal while at a stop. This same feature works great if you are on a slight incline. No rolling backwards, just clutch down, shift into first, give it some gas, and the brakes will automatically release, you don't need to do anything extra. For steeper inclines or hills, you can use the electronic parking brake. Clutch down, shift into first, give it some gas, and the parking brake will automatically release once you get moving. No danger of rolling back even an inch, so no need to freak out if someone is right on your bumper. And the rev match feature works perfectly, too! Makes downshifting so smooth. Overall, I am very pleased with this car! I'm glad Toyota designed this car to be so easy for beginners.
Nice! Those cheat features sound rather handy.
Yes indeed! Very handy, since both brake features allow you to just relax and drive, instead of worrying about rolling backwards into someone. It's cool to be able to sit on an incline, with both feet on the floor, and not roll backwards. Also saves wear-and-tear on the clutch for sure, since you don't need to give much, if any, extra gas in order to overcome gravity. So, I never bothered to learn how to do hill starts "properly," I instead rely entirely on the tech. I don't think it matters, though. It's unlikely that I'll ever be in a situation where I'll have to drive a manual car other than my own. Likewise, I don't see any benefit in learning how to blip the throttle on downshifts. The Corolla's computer could do a better job than I feel I ever could.
Glad you were able to learn and you're still loving the car! Those features do sound useful, though personally I don't understand wanting to drive a manual if the car is going to take away all the fun and do it for you.
I thought the same, but I think if you know how to do it in case you ever need to, the incline feature isn't terrible for day-to-day convenience. I've owned nothing but manual cars but having driven the hills of San Francisco, the incline feature wouldn't be half bad lol.Originally Posted by Leegamer ↑Glad you were able to learn and you're still loving the car! Those features do sound useful, though personally I don't understand wanting to drive a manual if the car is going to take away all the fun and do it for you.
Aside from that, manuals are going away, so if these types of helpy helperton features bring a few people back, I'm not going to complain about it 😁
That's a good point! As long as you can turn it off.Originally Posted by ern-diz ↑Aside from that, manuals are going away, so if these types of helpy helperton features bring a few people back, I'm not going to complain about it 😁
A new update for this old thread.
I recently traded in my (Japan-built) 2020 TNGA Corolla SE Sedan 6-MT because I wasn't happy with some things (both personal preference issues & vehicle related issues), & Toyota dragging their feet addressing the issues that related to warranty and/or saying certain issues were "normal" (like 3 new batteries replaced under warranty in first 2 years - WTH). I feel that modern-day Toyota, like Honda, is now coasting on a reputation that has become outdated. So, without a TNGA Yaris hatch in the U.S. market to entice me, I'm not interested in owning a Toyota or dealing with Toyota any longer.
So, I purchased a 2022 Mazda CX-30 Carbon Edition about a month ago at MSRP (yay, no crazy dealership market markups) & finally joined the dreaded SUV/Crossover legions here in the USA. Luckily I was able to get a trade value equal to what the Corolla was priced at brand new in late 2019 - talk about a crazy, upside down used car market! I have to say that I'm impressed by my new Mazda CX-30 AWD Carbon thus far. Not a single defect or issue to be found & it is more comfortable/premium than my Corolla SE Sedan was in pretty much every respect. The only drawback is that I'm now driving a 6-AT instead of a manual for the first time in my life (which might not be a bad thing really these days). Manuals are definitely more FUN & engaging, though an automatic is very convenient in heavy, stop & go traffic. Also, still not a fan of the thickly-uniform black cladding on the CX-30, but the black wheels & blacked out chrome trim (& added matte black lower hatch accent) pull it all together better IMO. I was originally shopping for a CX-5 Carbon Edition or Premium trim, but the smaller/compact CX-30 was more my size preference & does look a lot better up-close & in-person than in pics/videos. Most cars/vehicles seem to be like that I have found.
Great to have a hatchback again! So, until a TNGA Yaris hatch in a premium trim level hits this market, I'm good.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
I recently traded in my (Japan-built) 2020 TNGA Corolla SE Sedan 6-MT because I wasn't happy with some things (both personal preference issues & vehicle related issues), & Toyota dragging their feet addressing the issues that related to warranty and/or saying certain issues were "normal" (like 3 new batteries replaced under warranty in first 2 years - WTH). I feel that modern-day Toyota, like Honda, is now coasting on a reputation that has become outdated. So, without a TNGA Yaris hatch in the U.S. market to entice me, I'm not interested in owning a Toyota or dealing with Toyota any longer.
So, I purchased a 2022 Mazda CX-30 Carbon Edition about a month ago at MSRP (yay, no crazy dealership market markups) & finally joined the dreaded SUV/Crossover legions here in the USA. Luckily I was able to get a trade value equal to what the Corolla was priced at brand new in late 2019 - talk about a crazy, upside down used car market! I have to say that I'm impressed by my new Mazda CX-30 AWD Carbon thus far. Not a single defect or issue to be found & it is more comfortable/premium than my Corolla SE Sedan was in pretty much every respect. The only drawback is that I'm now driving a 6-AT instead of a manual for the first time in my life (which might not be a bad thing really these days). Manuals are definitely more FUN & engaging, though an automatic is very convenient in heavy, stop & go traffic. Also, still not a fan of the thickly-uniform black cladding on the CX-30, but the black wheels & blacked out chrome trim (& added matte black lower hatch accent) pull it all together better IMO. I was originally shopping for a CX-5 Carbon Edition or Premium trim, but the smaller/compact CX-30 was more my size preference & does look a lot better up-close & in-person than in pics/videos. Most cars/vehicles seem to be like that I have found.
Great to have a hatchback again! So, until a TNGA Yaris hatch in a premium trim level hits this market, I'm good.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
The front end has kind of a Sinister Rattlesnake appearance and I like the chrome exhaust tips and black wheels against the Carbon color!
... and very nice looking home!
... and very nice looking home!
Thanks. Yeah, I like how well Mazda designs & integrates their exhaust system into their vehicles, & how they use the classic right/left side dual exhaust setup with the nice, simple & sexy circular stainless-steel tips. No stupid, tacky, oversized, weird-shaped pseudo-premium exhaust housings like a lot of vehicles try to use these days, or fake outlets. Toyota vehicle exhaust systems always seem to look like a budget afterthought bolt-on, with an ugly, discolored muffler/pipes, etc. sticking out for all the world to see.Originally Posted by justanotherdrunk ↑The front end has kind of a Sinister Rattlesnake appearance and I like the chrome exhaust tips and black wheels against the Carbon color!
... and very nice looking home!
Congratulations!
While shopping for a new car, I test drove the CX-30 and the CX-5 recently. I was very impressed with both vehicles... which actually seemed upscale compared to Toyota, especially the richly appointed interiors.
While shopping for a new car, I test drove the CX-30 and the CX-5 recently. I was very impressed with both vehicles... which actually seemed upscale compared to Toyota, especially the richly appointed interiors.