Yarisworld Archive

Brake caliper torque specs?

6 posts · 30,281 views

imopxnOriginal postUsa · Aug 23, 2019#1
Hello all,

This is my first time changing the rotors and brake pads on my 2010 Yaris sedan. How would I find the correct torque specs for each bolt on the caliper?

Replies 5

myfirstyotaToronto Canada · Aug 23, 2019#2
Calibrated elbow. Not too tight! Lol

I honestly dont know. I'm sure someone here does. I've always just estimated. Hasn't failed me yet!
johnwkRochester, NY · Aug 23, 2019#3
According to the Haynes Manual, the spec for the guide pin bolt is 34 Nm (25 ft lbs) and the spec for the caliper mounting bracket bolts is 107 Nm (79 ft lbs).
ex-x-fireSheboygan Falls, Wi. · Aug 23, 2019#4
I'd use some blue Loctite too.
tmontagueCaledonia Ont. · Aug 24, 2019#5
Hmm good to know, I've always went with a couple ugga dugga's (SMA reference) on the 14mm caliper slide pin bolts and a few on th 17mm bracket bolts. Never had an issue in the track yet.
komichalCZ · Aug 26, 2019#6
Originally Posted by johnwk ↑
According to the Haynes Manual, the spec for the guide pin bolt is 34 Nm (25 ft lbs) and the spec for the caliper mounting bracket bolts is 107 Nm (79 ft lbs).
Yep, I am using these values as well. Works fine. No Loctite on threads. Waste of money (unless you have it for free).