PinchliteOriginal postBarrie Canada · Jul 26, 2019#1Seeing I just finished installing the kamanari kit I decided a rear spoiler would look good.
This is the one I want to get.Only concern is the mounting looks flimsy.2 or 3 screws doesnt seem adequate to keep it sturdy,perhaps when slamming back door too hard accidently?
Anyone who has this I would really appreciate opinions.
https://www.amazon.ca/Spec-D-Tuning-.../dp/B01DMSUSX0 P.S
I did see this post,but it still seems as it would be flimsy even if you used a large washer on the inside with nut?
DIY Hatchback Spoiler InstallReplies 11
bladesmith6PA · Jul 27, 2019#2i would not buy that one especially if you car is parked outside alot. i had the same model and it split right down the center during the winter.
bladesmith6PA · Jul 27, 2019#3abs plastic is kind of crappy, much better to get a factory urethane one or carbon fiber. i have the kaminari kit as well that i will be installing soon.
PinchliteThread starterBarrie Canada · Jul 27, 2019#4 Originally Posted by
bladesmith6 ↑ i would not buy that one especially if you car is parked outside alot. i had the same model and it split right down the center during the winter.
What caused it to split,just the cold alone?
Also was it floppy when going over bumps and such?
06YarisRSFredericton, New Brunswick, Canada · Jul 28, 2019#5I've had no issues with mine, though it's only been on for about a year and the car doesn't get a lot of use. Mine is not loose or floppy at all. It's very solid, but I used 3M tape as well as the screws. These spoilers are great - for the price. The finish quality ( aka, the fiberglass has some imperfections) is okay, not great. A person could do some finish work to make it better. But, no, it's not of the quality of, say a Seibon piece.
PinchliteThread starterBarrie Canada · Jul 28, 2019#6Great to hear and thanks for feedback!
lani100Netherlands · Jul 29, 2019#7Got mine from china for a third of the price, build quality is fine.
Once bolted down it's very sturdy no complaints.
06YarisRSFredericton, New Brunswick, Canada · Jul 29, 2019#8 Originally Posted by
lani100 ↑ Got mine from china for a third of the price, build quality is fine.
Once bolted down it's very sturdy no complaints.
Yeah, mine was around $35 or $40 USD. I live next to the border fortunately.
PinchliteThread starterBarrie Canada · Jul 30, 2019#9 Originally Posted by
lani100 ↑ Got mine from china for a third of the price, build quality is fine.
Once bolted down it's very sturdy no complaints.
I could have gotten from china but wanted it quick.Ordered sunday and its here today(Tuesday)
Great to hear its sturdy and appreciate feedback.
06YarisRSFredericton, New Brunswick, Canada · Jul 30, 2019#10 Originally Posted by
Pinchlite ↑ I could have gotten from china but wanted it quick.Ordered sunday and its here today(Tuesday)
That, I totally get. Never worth waiting for what can be months just to save a few bucks. Have fun with the installation. I bet if you documented it here on the site, it would be followed by quite a few people.
PinchliteThread starterBarrie Canada · Jul 30, 2019#11 Originally Posted by
06YarisRS ↑ That, I totally get. Never worth waiting for what can be months just to save a few bucks. Have fun with the installation. I bet if you documented it here on the site, it would be followed by quite a few people.
Going to paint this weekend.Using spraymax 2k.
They did not include the hardware (Screws and caps for holes)
They gave me the option to send me another or refund me 20%.
I took the refund and will figure the rest out.
06YarisRSFredericton, New Brunswick, Canada · Aug 2, 2019#12 Originally Posted by
Pinchlite ↑ Going to paint this weekend.Using spraymax 2k.
They did not include the hardware (Screws and caps for holes)
They gave me the option to send me another or refund me 20%.
I took the refund and will figure the rest out.
SprayMax 2K is the cat's ass. Wear a good quality respirator. Those isocyanates can fark you up really bad! What are you using for a base coat? If you're using Duplicolor Perfect Match, I'd recommending applying the SprayMax clear before the Perfect Match fully cures. I cleared a set of wheels that had been base coated with the Perfect Match and had cured for a few days. The SprayMax flaked off in big sheets. I've applied the SprayMax 20 - 30 minutes after the final base coat of Perfect Match and it bonded really well and never failed.