Yarisworld Archive

hatchback drivers-passenger door plate removal?

7 posts · 5,048 views

PinchliteOriginal postBarrie Canada · Jul 1, 2019#1
Not sure what this thing is even called but its part of the B pillar?

I would like to remove for paint without damaging if possible.

https://i.imgur.com/Sh8b9At.jpg

Replies 6

06YarisRSFredericton, New Brunswick, Canada · Jul 2, 2019#2
Originally Posted by Pinchlite ↑
Not sure what this thing is even called but its part of the B pillar?

I would like to remove for paint without damaging if possible.

https://i.imgur.com/Sh8b9At.jpg
Pretty sure that's either satin black paint or vinyl tape. I think it's part of the door frame, so not a removeable part, per se. Throw a painter's sheet over your car, cut out a slightly larger rectangular hole and tape off the area. Tape your door gasket rubber in the painting area. Sand with a minumum 400 paper (600 might be better), spray paint with a satin black, such as this 2K product: https://centralalbertapaintsupply.ca...d-satin-black/ or use a black spray paint and a satin clear such as: https://www.spraymax.com/en-us/produ...k-clear-satin/. I believe both of these products have UV protection built in - very important as if no UV protection is present, these will fade rapidly.

I polished mine with my DA polisher and a polishing compound and applied a few coats of Klasse SG acrylic sealant. They came out great.
ern-dizCA all day · Jul 2, 2019#3
Officially, I believe it's called an 'applique'. Someone else asked about them recently and since I had mine replaced early in my car's life due to some spotting, I was familiar with them. They pop off and can be replaced or as 06 indicated, can be restored. More info including part numbers here:

Link to a thread or page that is not in the archive
06YarisRSFredericton, New Brunswick, Canada · Jul 2, 2019#4
Originally Posted by ern-diz ↑
Officially, I believe it's called an 'applique'. Someone else asked about them recently and since I had mine replaced early in my car's life due to some spotting, I was familiar with them. They pop off and can be replaced or as 06 indicated, can be restored. More info including part numbers here:

Link to a thread or page that is not in the archive
Ah, I stand corrected. Great to know. Thanks!
ern-dizCA all day · Jul 2, 2019#5
Originally Posted by 06YarisRS ↑
Ah, I stand corrected. Great to know. Thanks!
The universe doesn't feel right to me thinking I corrected you on something automotive 😆

You were and are right, though, they can be restored.
PinchliteThread starterBarrie Canada · Jul 2, 2019#6
Originally Posted by ern-diz ↑
Officially, I believe it's called an 'applique'. Someone else asked about them recently and since I had mine replaced early in my car's life due to some spotting, I was familiar with them. They pop off and can be replaced or as 06 indicated, can be restored. More info including part numbers here:

Link to a thread or page that is not in the archive
They Pop off.So its just a matter of pulling untill the clips give out.If it is indeed clipped,and the clips break I would think 2 sided tape would resecure it just fine.
PinchliteThread starterBarrie Canada · Jul 2, 2019#7
Originally Posted by 06YarisRS ↑
Pretty sure that's either satin black paint or vinyl tape. I think it's part of the door frame, so not a removeable part, per se. Throw a painter's sheet over your car, cut out a slightly larger rectangular hole and tape off the area. Tape your door gasket rubber in the painting area. Sand with a minumum 400 paper (600 might be better), spray paint with a satin black, such as this 2K product: https://centralalbertapaintsupply.ca...d-satin-black/ or use a black spray paint and a satin clear such as: https://www.spraymax.com/en-us/produ...k-clear-satin/. I believe both of these products have UV protection built in - very important as if no UV protection is present, these will fade rapidly.

I polished mine with my DA polisher and a polishing compound and applied a few coats of Klasse SG acrylic sealant. They came out great.
I used spraymax 2K for my mirrors after UPOL color match base of course.That stuff is amazing!

I just had my car painted(3 base+ 3 clears)and know the plastic looks really weathered.I did paint the parts around the side mirrors that came off easily.Know to finish it off completly I will paint the door plate thingy.

I could mask but prefer to have the part off so I can prep it more easily and not have to mask.

Every part that I could remove including badges were removed for spray.