06YarisRSOriginal postFredericton, New Brunswick, Canada · Feb 16, 2019#1The bar has been sitting around my dining room for a couple months now and since it was relatively warm today, I thought I'd throw it on. Unfortunately, it will be a couple more months before I can experience the handling improvement.
The installation was a snap. The shock bolts came off fairly easily with my electric impact gun, largely due to the rustproofing that I do regularly. I did blast the bolts with some ReleasAll about 1/2 hour before. This bar could easily have been installed with the wheels on as mentioned in another post, but I thought I'd take them off anyway.
Bolts removed:
Picture not included in this copy
Got this tip from another post. Install back bolts first, then roll the bar forward into position and install the front bolts. Makes for a very easy install:
Picture not included in this copy
Lots of antiseize.
Picture not included in this copy
I dropped the torque of 36 and 40 ft/lbs a touch to compensate for the antiseize:
Picture not included in this copy
Picture not included in this copy
Wheels back on:
Picture not included in this copy
Replies 11
tmontagueCaledonia Ont. · Feb 16, 2019#2Nicely done, now to wait around for spring to test it out...
06YarisRSThread starterFredericton, New Brunswick, Canada · Feb 16, 2019#3 Originally Posted by
tmontague ↑ Nicely done, now to wait around for spring to test it out...
Haha, yeah. Gonna be tough to wait. But, it does give me time if I decide to do another project.
Looking at your sig pic, it looks like you did eventually install the engine stay. Also, catch can setup looks great.
IllusionXBrossard, QC · Feb 16, 2019#4Good you have time for rustproofing. My sway bar is pretty much all rusted now :)
Sent from my CLT-L04 using Tapatalk
06YarisRSThread starterFredericton, New Brunswick, Canada · Feb 16, 2019#5 Originally Posted by
IllusionX ↑ Good you have time for rustproofing. My sway bar is pretty much all rusted now :)
Sent from my CLT-L04 using Tapatalk
Yes, rustproofing ranks high on my maintenance list.
I thought about painting the swaybar black but pretty sure primer and paint doesn't really adhere well to powder coat. When it does get chipper and start to show early signs of rust, I will paint it in a nice satin black.
IllusionXBrossard, QC · Feb 16, 2019#6 Originally Posted by
06YarisRS ↑ Yes, rustproofing ranks high on my maintenance list.
I thought about painting the swaybar black but pretty sure primer and paint doesn't really adhere well to powder coat. When it does get chipper and start to show early signs of rust, I will paint it in a nice satin black.
Wanna trade with mine? It's probably not red anymore lol
Sent from my CLT-L04 using Tapatalk
06YarisRSThread starterFredericton, New Brunswick, Canada · Feb 16, 2019#7 Originally Posted by
IllusionX ↑ Wanna trade with mine? It's probably not red anymore lol
Sent from my CLT-L04 using Tapatalk
Sure, why not. Paint would probably stick to yours better.
tmontagueCaledonia Ont. · Feb 16, 2019#8 Originally Posted by
06YarisRS ↑ Haha, yeah. Gonna be tough to wait. But, it does give me time if I decide to do another project.
Looking at your sig pic, it looks like you did eventually install the engine stay. Also, catch can setup looks great.
That is an old pic, I have a much cleaner and proper occ now. I'll update my pic but the engine bay is no where near that clean anymore...
06YarisRSThread starterFredericton, New Brunswick, Canada · Feb 18, 2019#9 Originally Posted by
tmontague ↑ That is an old pic, I have a much cleaner and proper occ now. I'll update my pic but the engine bay is no where near that clean anymore...
Look forward to seeing it. 👍
tmontagueCaledonia Ont. · Apr 21, 2019#10No it doesnt. The rear suspension is an H beam design which is a semi independant system. A rsb actually makes it act more like a solid axle fully non independant suspension. It will feel more solid on the highway and slightly increase oversteer but when pushed to its limit the rsb will actually become detrimental to grip
Tskm2Montreal · Apr 22, 2019#11From where you buy? Direct from dealer?
06YarisRSThread starterFredericton, New Brunswick, Canada · Apr 22, 2019#12 Originally Posted by
Tskm2 ↑ From where you buy? Direct from dealer?
I shopped around for a while for the best price. I bought it from a Toyota dealer in California, iirc.