I'd been looking for a used one for a while but they are clearly scarce.
Delivered to my US post box for $173.00 USD. Not too bad.
Can't wait to install it.
Delivered to my US post box for $173.00 USD. Not too bad.
Can't wait to install it.
45 posts · 39,875 views
Yes, I did look at the Whiteline bar. They were more expensive and look like a lot more work to install. I'll do some more reading on them. I made the assumption, maybe falsely, that TRD would know the car best and as such develop the most appropriate product for it.Originally Posted by ern-diz ↑I don't think that's a bad price. Some users have enjoyed the Whiteline bar. Not sure if you looked at those.
Thanks NYC-SE. I read posts by you and others before about the sway bar and no doubt they contributed to my desire to obtain one. I've definitely heard others express the notion that it's one of the best investments a person can make for the car. Can't wait! 😁 Only downside is that I'll have to wait until spring to enjoy the benefits. Well, maybe I can get the car out once or twice when the roads are clear. HahaOriginally Posted by NYC-SE ↑I think you will be very pleased with the sway bar. I too have heard that it's not best for the track, I don't know if that's actually true as I have never tracked my car but as far as the street is concerned it was the best money I spent on my car.
Yes it will help with highway drift. No it won't make the rear suspension too stiff. And yes it will help in the curves. Enjoy.
Thanks Stidnam. I really like the look and apparent simplicity of the TRD bar. Maybe after installing the TRD bar, I will feel that having adjustment ability would be an asset. But, from what everybody is saying, I'm sure I'll be happy with it. I don't recall anyone mentioning if the sway bars make the ride rougher or not. Personally, I like the ride characteristics of the OEM suspension in regard to up and down movements. Cornering will no doubt be improved. And yes, tires will be a consideration in the future. Right now, I have 195's on my OEM wheels and I'm sure that this wide a tire on a relatively narrow rim is not helping much in terms of cornering. I like a wider tire look, but also love my OEM alloys.Originally Posted by stidnam ↑There's not much more to installing the Whiteline one other than bolting the bar to the actual torsion beam using the supplied bracket - just did mine a couple of weeks back. We don't even have the option of a TRD bar in Aus. This is a very simple job in comparison to replacing an engine ;)
But yes, buy one - they both do the same job, except the Whiteline one being adjustable for all its worth.
For a daily driver, it'll dramatically improve how flat the car feels through a corner. Wouldn't worry about what people say about the track unless you plan to turn this into some dedicated track car. You'll still have plenty of fun with it on the odd track day.
Yes, you do need to be conscious about lift off oversteer, but not worried about it. Putting one of these bars on is instantly going to make you want to throw some decent rubber on it :)
No you won't.Originally Posted by 06YarisRS ↑Maybe after installing the TRD bar, I will feel that having adjustment ability would be an asset.
it works on my '15.Originally Posted by 06YarisRS ↑All this positive feedback about the TRD bar is really building my anticipation. It does sound like an excellent, cost effective upgrade. We have awesome roads around here as it's coastal terrain. Lots of winding roads combined with hills and valleys should make for a very enjoyable driving experience. It's going to be a blast. Thank you all!
Good to know.Originally Posted by DarkShadowFox ↑it works on my '15.
WHEEEEE.
yaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaayOriginally Posted by 06YarisRS ↑Good to know.
Received a notification 2 days ago that my bar was on back order. Called the dealer in Pennsylvania yesterday and they said it was just coming from a different warehouse, in California. Got my tracking number today. Yay!
Sure will, man!Originally Posted by atomic_hoji ↑👍 Keep us posted how she handles with the racing parts.. lol 😁
-- Adam
I'm sure of it. Last night I found myself browsing wheel and tire websites. As mush as I love my stock RS wheels, as Stidnam said, I'll probably be wanting something a little more aggressive in the wheel/tire department. If those dang 15" wheels weren't so narrow, I'd just put a better 195 on them. This could get expensive fast!Originally Posted by Type-Y ↑You are definitely going to like the bar.
Funny you mention that. I was thinking about painting mine black. Although it's likely not very visible when installed, I like things understated. Not sure how well paint would adhere to powdercoat though.Originally Posted by WeeYari ↑I fondly remember when mine looked like that. Now there's barely any red on it.
Sent from my EML-L09 using Tapatalk
Yeah, I likely won't bother. Maybe when it looks like yours 😆, I'll sand it and spray it black.Originally Posted by WeeYari ↑It's visually barely there. Don't bother painting it.
Sent from my EML-L09 using Tapatalk
Since your princess will never see winter again, it'll never look like mine.Originally Posted by 06YarisRS ↑Maybe when it looks like yours Picture not included in this copy,
😆 😆 😆 True. "Garage Princess", not "Queen" as it's neither a classic nor particularly rare. LOL.Originally Posted by WeeYari ↑Since your princess will never see winter again, it'll never look like mine.
Sent from my EML-L09 using Tapatalk
I hope mine stays red & dandy till I sell the car since the weather here is either hot or rainy 😁Originally Posted by WeeYari ↑I fondly remember when mine looked like that. Now there's barely any red on it.
Total jealousy here.Originally Posted by Fluxtasy ↑...since the weather here is either hot or rainy 😁
looks like mine now its all pitted and rusted.Originally Posted by 06YarisRS ↑Even the dog loves it...
Picture not included in this copy
also giant allergy floof dogOriginally Posted by 06YarisRS ↑Even the dog loves it...
Picture not included in this copy
kijiii what.Originally Posted by myfirstyota ↑Why isn't it installed yet? Lol. 10 min job.
I got a used one off kijiji along with tein stechs for $160 couple years back. Best suspension mod you can do IMO. The instability I used to get on the hiway around big rigs is almost completely gone.
You will love it.
kijiji - what we all use instead of craigslist.Originally Posted by DarkShadowFox ↑kijiii what.
oh cause its canada. oopsOriginally Posted by WeeYari ↑kijiji - what we all use instead of craigslist.
Sent from my EML-L09 using Tapatalk
Might install it this weekend, but not in a huge hurry as the car is off the road for winter.Originally Posted by myfirstyota ↑Why isn't it installed yet? Lol. 10 min job.
I got a used one off kijiji along with tein stechs for $160 couple years back. Best suspension mod you can do IMO. The instability I used to get on the hiway around big rigs is almost completely gone.
You will love it.
you do know you back two bolts out and install it right?Originally Posted by 06YarisRS ↑Might install it this weekend, but not in a huge hurry as the car is off the road for winter.
I use Kijiji, except lately it has become so badly clogged with ads from dealers and parts suppliers that it's a hassle to find anything used. IMO, kijiji has deteriorated significantly. Aside from this, a large urban center like the GTA would have much more availability of used parts. I live in a much more rural area, so selection is relatively limited.
I've noticed this too when searching for our future family awd Sienna. The whole front page is all ads and dealers, not too happy about that. I guess it pays. It's worth it to take the time and search deep into the pages. I've found people that still haven't sold stiff on page 10 that was posted within the month.Originally Posted by 06YarisRS ↑Might install it this weekend, but not in a huge hurry as the car is off the road for winter.
I use Kijiji, except lately it has become so badly clogged with ads from dealers and parts suppliers that it's a hassle to find anything used. IMO, kijiji has deteriorated significantly. Aside from this, a large urban center like the GTA would have much more availability of used parts. I live in a much more rural area, so selection is relatively limited.
*4 bolts, and depending on how flexible Adam's muscles are he may want to jack the rear end up. Realistically it's an hour from complete start to finish with cleanup, especially if you haven't installed it beforeOriginally Posted by DarkShadowFox ↑you do know you back two bolts out and install it right?
i forget but i think i only had to backout two but ill check again. i think it was 4 because its non adustable.Originally Posted by tmontague ↑I've noticed this too when searching for our future family awd Sienna. The whole front page is all ads and dealers, not too happy about that. I guess it pays. It's worth it to take the time and search deep into the pages. I've found people that still haven't sold stiff on page 10 that was posted within the month.
*4 bolts, and depending on how flexible Adam's muscles are he may want to jack the rear end up. Realistically it's an hour from complete start to finish with cleanup, especially if you haven't installed it before
just put the bar on already 😕Originally Posted by 06YarisRS ↑Thanks for the feedback gentlemen. I've put sway bar on the back burner until I can straighten out my A/C issues. That said, if the A/C becomes a long process, I may console myself with the installation of the sway bar. Since I'm not sure how flexible my muscles are 😆 I will probably jack the car up and remove the wheels. God knows, I've got lots of time and a few good jacks.
Cause it is cold in New Brunswick and the car is in winter storage anyway.Originally Posted by DarkShadowFox ↑just put the bar on already 😕
You got that right, WeeYari! Quite nippy out there. Even with my 240V heater and plastic covered paint booth, I'm lucky to reach 15C.Originally Posted by WeeYari ↑Cause it is cold in New Brunswick and the car is in winter storage anyway.
Sent from my EML-L09 using Tapatalk