Yarisworld Archive

Hobbies - Other Interests

53 posts · 89,493 views · page 1 of 2

06YarisRSOriginal postFredericton, New Brunswick, Canada · Nov 8, 2018#1
I was doing some housekeeping on my computer and came across some pics. Figured I post some in case there are any flight sim enthusiasts on the site. Before I got more into cars, I did a lot of flightsimming. After virtually flying the global skies, I decided to try my hand at developing some scenery. Microsoft Flight Simulator was open-sourced enough to allow for considerable third-party development. Some of the add-on aircraft I bought were amazingly compex and came with actual operations manuals - virtually every system modeled. My mainstay for flying was a Boeing 767.

I worked with a couple other guys, one of which was my coding guy and he did most of the effects and coding needed to make seasonal ground polygons work among a bunch of other really complicated stuff. Although most of the sceneries he and I created were freeware, we did do one project that was payware. The scenery was the culmination of about 18 months work and 1000s of pics sent to me by a Westjet captain out of Calgary International. He was basically my project advisor. Everything you see on the airfield proper was created with a 3-D modeling program and all textures for the buildings and ground polygons were either actual doctored digital photos or made from stratch in Photoshop. The aircraft in the photos are low resolution AI air traffic.

Some of scenery development groups out there make this stuff look cartoonish in comparison. It's really amazing what can be done.

I hope to get back into simming some day again and my son has started to develop an interest.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy


Here are a couple from another scenery, Calgary Springbank.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Replies 52

LeegamerAshland, VA · Nov 8, 2018#2
Dude, that's awesome!
SirDigbyDenver, Colorado · Nov 14, 2018#4
those are very pretty, what do you do with them? do you only do airports? have you thought of getting into video game design? (other than flight simulator)
eTiMaGoBangkok, Thailand · Nov 15, 2018#5
Nice! I spent far too many hours in MS Flight Simulator and Flight Unlimited II back in the day... Too bad I don't have the time for that anymore :(
06YarisRSThread starterFredericton, New Brunswick, Canada · Nov 15, 2018#6
Originally Posted by SirDigby ↑
those are very pretty, what do you do with them? do you only do airports? have you thought of getting into video game design? (other than flight simulator)
All the sceneries were uploaded to flightsim sites, namely avsim and flightsim.com. Yes, only airports but I did a few aircraft liveries. I never really had any interest in game development.
06YarisRSThread starterFredericton, New Brunswick, Canada · Nov 15, 2018#7
Originally Posted by eTiMaGo ↑
Nice! I spent far too many hours in MS Flight Simulator and Flight Unlimited II back in the day... Too bad I don't have the time for that anymore :(
I LOVED FU2. Wish it had been expanded to cover more territory though. The flight dynamics (yaw modeling absolutely ruled!), performance- on mid level hardware - blew MSFS out of the water. And those rain effects!

Something we always had to be cognizant of in design - especially with larger sceneries- was keeping polygon counts/ 3D model complexity and texture sizes low to facilitate good performance. MSFS's coding engine sucked, even after they went XML in FSX. It would require a beast of a gaming machine to run it with any addons and weather, whereas FU2 would run quite respectably on a Pentium 4. Lol I usually had pretty up to date gear but I was never 100% satisfied with the way the MSFS series ran. Then again, I used heavy addon aircraft, secnery and weather engines.
DarkShadowFoxMassachusetts · Nov 15, 2018#8
Originally Posted by 06YarisRS ↑
I LOVED FU2. Wish it had been expanded to cover more territory though. The flight dynamics (yaw modeling absolutely ruled!), performance- on mid level hardware - blew MSFS out of the water. And those rain effects!

Something we always had to be cognizant of in design - especially with larger sceneries- was keeping polygon counts/ 3D model complexity and texture sizes low to facilitate good performance. MSFS's coding engine sucked, even after they went XML in FSX. It would require a beast of a gaming machine to run it with any addons and weather, whereas FU2 would run quite respectably on a Pentium 4. Lol I usually had pretty up to date gear but I was never 100% satisfied with the way the MSFS series ran. Then again, I used heavy addon aircraft, secnery and weather engines.
i liked crashing my plane into the ground. 🤣
06YarisRSThread starterFredericton, New Brunswick, Canada · Nov 15, 2018#9
Originally Posted by DarkShadowFox ↑
i liked crashing my plane into the ground. 🤣
Yeah, except that they didn't have crash modeling. Microsoft had to sign an agreement with Boeing, Cessna, Raytheon etc promising not to 'virtually' explode their planes. So, I guess if you liked bouncing off the ground and calling it a crash, more power to ya. Then again, you could download one of the few addons that made the plane turn into a fireball on impact. Most of those were removed from the flightsim sites, for obvious reasons.
eTiMaGoBangkok, Thailand · Nov 15, 2018#10
Originally Posted by 06YarisRS ↑
Yeah, except that they didn't have crash modeling. Microsoft had to sign an agreement with Boeing, Cessna, Raytheon etc promising not to 'virtually' explode their planes. So, I guess if you liked bouncing off the ground and calling it a crash, more power to ya. Then again, you could download one of the few addons that made the plane turn into a fireball on impact. Most of those were removed from the flightsim sites, for obvious reasons.
That's why I loved Flight Unlimited II, I could take a Cessna as high as it can go, dive until it reaches some crazy speed, then pull up, and leave the wings behind me somewhere 😁
06YarisRSThread starterFredericton, New Brunswick, Canada · Nov 15, 2018#11
Originally Posted by eTiMaGo ↑
... dive until it reaches some crazy speed, then pull up, and leave the wings behind me somewhere 😁
AKA, turning the plane into a lawn dart. The Fairchild Metro Liner 3 had that nickname. 😆 I knew a guy that flew one and he even called it that. LOL
IllusionXBrossard, QC · Nov 15, 2018#12
I play VRC Pro these days, and on other days, I drive actual RC buggy

Sent from my CLT-L04 using Tapatalk
06YarisRSThread starterFredericton, New Brunswick, Canada · Nov 15, 2018#13
Originally Posted by IllusionX ↑
I play VRC Pro these days, and on other days, I drive actual RC buggy

Sent from my CLT-L04 using Tapatalk
Checked that out. Looks really cool! I had a brief stint with RC planes. I had a couple buddies that were really good at flying them. I built a trainer (Sierra something), high wing config. I got pretty good at 'high' altitude patterns, but totalled it on my first takeoff. I didn't apply enough power, one wing stalled and it cartwheeled to its death. 😢 The upside is that some kid with almost no money in our RC club got an engine, servos, landing gear and a Futaba 4-channel radio for chump change.
eTiMaGoBangkok, Thailand · Nov 16, 2018#14
Originally Posted by 06YarisRS ↑
I LOVED FU2. Wish it had been expanded to cover more territory though. The flight dynamics (yaw modeling absolutely ruled!), performance- on mid level hardware - blew MSFS out of the water. And those rain effects!

Something we always had to be cognizant of in design - especially with larger sceneries- was keeping polygon counts/ 3D model complexity and texture sizes low to facilitate good performance. MSFS's coding engine sucked, even after they went XML in FSX. It would require a beast of a gaming machine to run it with any addons and weather, whereas FU2 would run quite respectably on a Pentium 4. Lol I usually had pretty up to date gear but I was never 100% satisfied with the way the MSFS series ran. Then again, I used heavy addon aircraft, secnery and weather engines.
I used to just sit on the tarmac in the rain and listen to it plink plink plink on the fuselage :D Loved that game too, it's one big reason I want to visit San Francisco!
06YarisRSThread starterFredericton, New Brunswick, Canada · Nov 17, 2018#15
Originally Posted by eTiMaGo ↑
I used to just sit on the tarmac in the rain and listen to it plink plink plink on the fuselage :D Loved that game too, it's one big reason I want to visit San Francisco!
Yup, Flight Unlimited was a fantastic series, for sure. I had high hopes that the title would be developed more but I don't think the developer deemed the project to be profitable. I liked the graphics, flight modeling, ATC etc and although these were superior, IMO, to the MSFS series, the MSFS series did have more going for it, especially in terms of being open-sourced and encourging of 3rd party development. The Flight Unlimited series was destined to be more of a 'game', whereas the MSFS series was more of a 'simulator'. I did buy FSX, but continued to use FS9 for years after FSX's release, mainly due to the third part addons.
06YarisRSThread starterFredericton, New Brunswick, Canada · Jan 13, 2019#16
Originally Posted by Gaara ↑
Man, you have am awesome hobby!!! My hobby is just gym training and cooking...
Missed this. Yes, it was great fun. I love cooking too. My younger brother is trained as a chef, my mother made sure all her boys were well familiar with a kitchen. Asian and Greek food are two of my favs.
ern-dizCA all day · Jan 15, 2019#17
Flight sim, schlight schim, this is just good ol' video gaming to me lol.

I do plenty of gaming. Overwatch, PUBG, PUBG Mobile, Forza 7, Forza Horizon 4 and COD Black Ops 4 are a few of the titles in my current rotation.
toadbowser's castle · Jan 15, 2019#18
I just got back into 1/24 scale models after my wife suggested I needed a hobby😳. I already had a couple Tamiya kits so it wasn't that expensive to get going! I'm not the most skilled(yet)😁, but it's just something to do in the cold winter months on my days off.

This is my first one- a Castrol Tom's Supra GT. Obviously, I've still got a little ways to go. I've got a Nissan 300zx still in the box for when this one's finished. I use Tamiya spray lacquer and primer for the shells and their liquid acrylics for the detail work.

1 attachment not included in this copy

06YarisRSThread starterFredericton, New Brunswick, Canada · Jan 15, 2019#19
Originally Posted by ern-diz ↑
Flight sim, schlight schim, this is just good ol' video gaming to me lol.
There are many that would differ in opinion. It never bothered me when folks called it a video game, but those more serious 'simmers' didn't see it that way. I remember when Microsoft mused about turnng the Flight Simulator franchise into a console game. It created quite a stir in the community. I believe the plan was to remove most of realism, improve the graphics, making it more accessible to the general public, sell more copies as the platform was not a money maker for FS. Since the game was released, it had an open platform and MS shared code so that 3rd party developers could make complex addons. One brilliant aircraft I bought and flew regularly was a 767 that modeled every system on the aircraft and had an extremely steep learning curve. It came with what was essentially the actual flight manual for the real aircraft, complete with all procedures and checklists from dark cockpit,all gate to gate operations, including and fuel/weight/cargo/passenger calculators. The flight modeling alone was a major programming endeavour.

There were other very complex addons such as weather generators that took years of development and worked on complex algorithms. I regard the MSFS platform as a base engine. It was the 3rd party development that really added the complexity and realism.

MSFS is used by real pilots (recreational and commercial) and flight schools, large and small. One of the guys that provided me with pics for my Calgary scenery is a WestJet captain and he uses it to keep current on instrument flying between flights.

A couple of my buddies that used MSFS were given two hours at a Flight Safety center in a real Boeing simulator and they successfully completed all phases of flight. Apparently the simulator operators were quite impressed and even threw in a few mechanical failures that the guys handled without incident.

I think most copies of MSFS sold ended up on shelves collecting dust as long-term engagement in the program required a significant investment in learning.

So is it a flight 'simulator'? Yes, Is it a video game? Also, Yes. LOL.
06YarisRSThread starterFredericton, New Brunswick, Canada · Jan 15, 2019#20
Originally Posted by toad ↑
I just got back into 1/24 scale models after my wife suggested I needed a hobby😳. I already had a couple Tamiya kits so it wasn't that expensive to get going! I'm not the most skilled(yet)😁, but it's just something to do in the cold winter months on my days off.

This is my first one- a Castrol Tom's Supra GT. Obviously, I've still got a little ways to go. I've got a Nissan 300zx still in the box for when this one's finished. I use Tamiya spray lacquer and primer for the shells and their liquid acrylics for the detail work.
Nice! Any chance of posting some finished models? Is the spray lacquer applied with an air brush, or small spray cans? Sorry, I'm not really knowledgeable about this.
SirDigbyDenver, Colorado · Jan 15, 2019#21
i have recently built some sweet computers. custom cases and custom water loops are very fun. lot's of fun! let me know if i can do something for you!

mobile unit:
Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

desktop unit:
Picture not included in this copy

this started a solid piece of metal:
Picture not included in this copy

Picture not included in this copy
06YarisRSThread starterFredericton, New Brunswick, Canada · Jan 16, 2019#22
Originally Posted by SirDigby ↑
i have recently built some sweet computers. custom cases and custom water loops are very fun. lot's of fun! let me know if i can do something for you!
Man, if I was still into gaming, I'd get you to build me a serious machine! I built a couple machines in my time, but nothing like those.

How about some specs on those machines?
ern-dizCA all day · Jan 17, 2019#23
Originally Posted by toad ↑
I just got back into 1/24 scale models after my wife suggested I needed a hobby😳. I already had a couple Tamiya kits so it wasn't that expensive to get going! I'm not the most skilled(yet)😁, but it's just something to do in the cold winter months on my days off.

This is my first one- a Castrol Tom's Supra GT. Obviously, I've still got a little ways to go. I've got a Nissan 300zx still in the box for when this one's finished. I use Tamiya spray lacquer and primer for the shells and their liquid acrylics for the detail work.
Awesome 👏

Originally Posted by 06YarisRS ↑
There are many that would differ in opinion. It never bothered me when folks called it a video game, but those more serious 'simmers' didn't see it that way. I remember when Microsoft mused about turnng the Flight Simulator franchise into a console game. It created quite a stir in the community. I believe the plan was to remove most of realism, improve the graphics, making it more accessible to the general public, sell more copies as the platform was not a money maker for FS. Since the game was released, it had an open platform and MS shared code so that 3rd party developers could make complex addons. One brilliant aircraft I bought and flew regularly was a 767 that modeled every system on the aircraft and had an extremely steep learning curve. It came with what was essentially the actual flight manual for the real aircraft, complete with all procedures and checklists from dark cockpit,all gate to gate operations, including and fuel/weight/cargo/passenger calculators. The flight modeling alone was a major programming endeavour.

There were other very complex addons such as weather generators that took years of development and worked on complex algorithms. I regard the MSFS platform as a base engine. It was the 3rd party development that really added the complexity and realism.

MSFS is used by real pilots (recreational and commercial) and flight schools, large and small. One of the guys that provided me with pics for my Calgary scenery is a WestJet captain and he uses it to keep current on instrument flying between flights.

A couple of my buddies that used MSFS were given two hours at a Flight Safety center in a real Boeing simulator and they successfully completed all phases of flight. Apparently the simulator operators were quite impressed and even threw in a few mechanical failures that the guys handled without incident.

I think most copies of MSFS sold ended up on shelves collecting dust as long-term engagement in the program required a significant investment in learning.

So is it a flight 'simulator'? Yes, Is it a video game? Also, Yes. LOL.
You're right. Even within traditional video games, there is a difference between something like Forza Motorsports 7, that is more sim, and Forza Horizon 4, which is more arcade. I just like to break balls 😁

Originally Posted by SirDigby ↑
i have recently built some sweet computers. custom cases and custom water loops are very fun. lot's of fun! let me know if i can do something for you!
Super cool 👍
SirDigbyDenver, Colorado · Jan 21, 2019#24
Originally Posted by 06YarisRS ↑

How about some specs on those machines?
the desktop is old, i built it when fallout 4 came out. (hence all the nuclear)
4790k, ROG Hero Maximus VII, EK CPU WB (overclocked 7%)
32GB Mushkin DDR3
(recently upgraded) EVGA FTW2 1070Ti GPU
samsung 850EVO SSD's
Noctura fans
Corsair 860AX power supply
all Bits Power fittings for water.

Portable:
8700k, ROG Strix X370-I, Artic Liquid Freezer 120 AIO (overclocked 37%)
16GB Crucial Ballistix DDR4
Gigabyte 1060 OC 6GB
2x Samsung NVMe M.2 SSD's
Crucial SSD
Corsiar ML120 fan
Corsair CX650M power supply
06YarisRSThread starterFredericton, New Brunswick, Canada · Jan 21, 2019#25
Originally Posted by ern-diz ↑
You're right. Even within traditional video games, there is a difference between something like Forza Motorsports 7, that is more sim, and Forza Horizon 4, which is more arcade. I just like to break balls 😁
Yeah, my son has, I believe, FH4. Amazing graphics, fun to play. Arcade games never really sustained my interest. The flightsim series did keep me engaged, largely due to the varied addons.

Another one I like, though haven't played lately, is Euro Truck Simulator. In fact I bought a gaming machine specifically for it. My son loves it too and he gets to see the European landscapes - geography lesson included. 😆
06YarisRSThread starterFredericton, New Brunswick, Canada · Jan 21, 2019#26
Originally Posted by SirDigby ↑
the desktop is old, i built it when fallout 4 came out. (hence all the nuclear)
4790k, ROG Hero Maximus VII, EK CPU WB (overclocked 7%)
32GB Mushkin DDR3
(recently upgraded) EVGA FTW2 1070Ti GPU
samsung 850EVO SSD's
Noctura fans
Corsair 860AX power supply
all Bits Power fittings for water.

Portable:
8700k, ROG Strix X370-I, Artic Liquid Freezer 120 AIO (overclocked 37%)
16GB Crucial Ballistix DDR4
Gigabyte 1060 OC 6GB
2x Samsung NVMe M.2 SSD's
Crucial SSD
Corsiar ML120 fan
Corsair CX650M power supply
Those sound like pretty awesome rigs! My current gamer (a few years old) runs the 4790k as well, no overclocking. One variant of the chip is not overclockable, maybe the basic 4790? A pretty powerful cpu for $$. The card in that machine isn't bad for basic gaming. I think it's a 4G GTX 750TI.
ern-dizCA all day · Jan 22, 2019#27
Originally Posted by 06YarisRS ↑
Yeah, my son has, I believe, FH4. Amazing graphics, fun to play. Arcade games never really sustained my interest. The flightsim series did keep me engaged, largely due to the varied addons.

Another one I like, though haven't played lately, is Euro Truck Simulator. In fact I bought a gaming machine specifically for it. My son loves it too and he gets to see the European landscapes - geography lesson included. 😆
Win-win!
SirDigbyDenver, Colorado · Jan 22, 2019#28
Originally Posted by 06YarisRS ↑
Those sound like pretty awesome rigs! My current gamer (a few years old) runs the 4790k as well, no overclocking. One variant of the chip is not overclockable, maybe the basic 4790? A pretty powerful cpu for $$. The card in that machine isn't bad for basic gaming. I think it's a 4G GTX 750TI.
nice. your machine will still outperform any ps4/xbox without issues. the "k" is the overclock-able on chip sets. i don't do any "tweaking" for the overclocking. the ROG MB comes with optimizing software. i run the computer for about 2 hours, then i ran the software and let it optimize all the settings. i didn't believe the portable at 37% and ran it 3 different times. 37% every time! sweet!

you will probably want to get a new video card in a year or two. i'd let them get in a generation or 2 on this new RTX before i'd buy one. IMO.
the GTX one's are pretty well priced now. i got the 1060 OC 6GB for like $200.
toadbowser's castle · Jan 30, 2019#29
Originally Posted by 06YarisRS ↑
Nice! Any chance of posting some finished models? Is the spray lacquer applied with an air brush, or small spray cans? Sorry, I'm not really knowledgeable about this.
Sorry it took a while, but here's an 'almost-finished' pic. It's my first one in quite some time so I still need to perfect my skills😳. I like to use the small spray cans on the shells(this one is still in it's primer coat). The sprays are pretty nasty to use indoors and since it was -11F outside I'm just going to wait until spring for the final coats.

I'm actually kind of digging the unfinished 'street-racer' look😎! I installed some front/rear LEDs and left out the windows to get the battery wires through(plus I smoked the lenses too much-rookie mistake- and couldn't see all the work I did on the interior). Started painting the smaller bits of a 300zx yesterday and will post pics when I have more to show. Thanks for the compliments!

1 attachment not included in this copy

06YarisRSThread starterFredericton, New Brunswick, Canada · Jan 30, 2019#30
Simply stunning! Really looking forward to the finished product. Bravo! The detail and care in assembly is truly impressive. Such a far cry from the cars and WW2 fighters and bombers I assembled as a kid.
justanotherdrunkSilicon Valley · Jan 31, 2019#31
yea nice model
LeegamerAshland, VA · Apr 27, 2021#32
Originally Posted by kamui ↑
Lately I am fond of playing online games
What do you play? I recently got a new laptop and have been playing some classic Lucas Arts and Sierra games from my childhood on steam.
Neinris‘Murica! · Apr 27, 2021#33
I fly electric airplanes, I learned from a 1400mm wing span Cessna, which I still have and in one piece, and a 70mm twin EDF A-10 Warthog.

I'm also into Monster trucks, I have a shelf queen Juggernaut, and a Clod Buster that I still bash around. I also have two Tamiya TLT-1s. I modified one to up the scale from 1:16 to 1:12.

2 attachments not included in this copy

Kaotic LazagnaCentral Valley, CA · Apr 27, 2021#34
Started 1/24 scale models some months back. Here are some pics of a couple I finished.

R33 GTR

4 attachments not included in this copy

Kaotic LazagnaCentral Valley, CA · Apr 27, 2021#35
R34 GTR

5 attachments not included in this copy

PinchliteBarrie Canada · Aug 29, 2021#36
Heavily addicting hobby.

Need to know how to solder small electronics..basic electrical skills.

You buy parts seperate..flight controller,esc's.video transmitters,radio transmitters etc.

Example,small flight controller boards are 20x20mm.

Most common are 30x30mm for 4 to 6 '' quadcopters,

You can fly with or without FPV goggles.
The gogs puts you in the cockpit.

Pic of my setup...5'' and 6'' quads aswell as larger cinematic build..

Those are 12'' carbon props on the large one btw.

https://i.imgur.com/08kxk0s.jpg

https://i.imgur.com/IbjU6tK.jpg

Dont let the size fool you...extremly fast..powerful...and could be extremly dangerous.

Vids of line of sight flying...Not me btw

https://www.youtube.com/watch?v=oUTD...KcjWcw&index=3

Slower freestyling..from the master mr steele..
https://www.youtube.com/watch?v=mAn2weuytUA

Lots of fun and highly addictive.
kevinj93Sydney, Australia · Nov 6, 2021#37
Moved to a new house last December. With more space available, I have become more active as a ham radio operator. Now that we are out of lockdown, I can go sailing again (I tow my Hobie Tandem Island with the Yaris) and have also been able to resume my weekly visits to the Pistol Range.
"A"Brooklyn · Feb 27, 2022#38
Anything 2-wheel for me.
I buy used cheap, fix 'em up and sell 'em.
Picture not included in this copy
Picture not included in this copy
"A"Brooklyn · Sep 13, 2022#39
This past Sunday, with the Coupe Cartel:

Picture not included in this copy

Picture not included in this copy
sh0rtlifepacific north WET · Jan 20, 2023#40
i have 2 problems....rc'cars (dating back to the 80s)and cutting up and modifying cars...especialy full chassis swaps

from pan racers to scale crawlers to crazy nitros...ive got plenty of stuff that could keep up with traffic on the freeway
sh0rtlifepacific north WET · Apr 3, 2023#41
ill start with the "rc" problems...

i do alot of scratch/mod builds

what you have here is a "pair" of bruder toy trucks, ones stone stock, the other is heaviliy modified on custom mounts and hand made/turned "drift" wheels sitting on an HPI awd chassis

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy


the collection..well..part of it anyway
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

some of the "random" projects

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
sh0rtlifepacific north WET · Apr 3, 2023#42
cutting up cars and ..i mean SERIOUS mods...i started with 24/25th scale, stopped one day and checked to see if the "skills" transfered to 1:1 scale...and they did

this is where the "model" work started ..a 70 dodge 3/4ton long box camper special...it was given to me for free.running...no reverse title in hand..its smaller than an early datsun pickup.id wager its about on par with a yaris in size

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

a few misc projects
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
sh0rtlifepacific north WET · Apr 3, 2023#43
i pretty much only work in steel..this is 100% steel..1000+ hours

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

a friends vic
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy


this..this is "eurosled"....a serious long term project of mine that life has halted many times...
1958 lloyd alexander TS kombi...sitting on an 87 alfa milano platinum chassis and running gear(engine swap to 3.8 quad cam alfa stroker in progress)....milano shortened 28 inches to get the lloyd wheelbase of just under 8ft(yes smaller than an original minicooper and by proxy conisderable smaller than a yaris)..current weight RUNNING with mocked 12gal of fuel 1800 lbs, perfect 50/50 weight balance...total length of under 12ft bumper to bumper, and narrower than a mini as well, factory suicide doors, 54 chevy hood heavily modified, jag xj6 headlights, 58 ford grill and partial dash, 54 for cluster, dash console and speedo placement inspired by yaris, seats from a jdm van, 8 inches of hand fabbed wide body, yaris heater,

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
sh0rtlifepacific north WET · Apr 3, 2023#44
yeah i also have a bike problem

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
NYC-SENYC · Apr 4, 2023#45
You have got some mad skillz there shortlife. Some really interesting projects. I'm insanely jealous of you guys that can do bodywork.
"A"Brooklyn · Jun 5, 2023#46
I can't afford this hobby, but every first weekend in June, there is the WWII Weekend in Reading, PA. I usually ride out with my motorcycle and walk though the festivities:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
sh0rtlifepacific north WET · Jun 5, 2023#47
i doubt anyone who owns a yaris can afford that...but i do love me some old war birds and heavy iron
matching that to a ride is a bonus.....i havnt had time to get any of my motorcycles out for 2 years
sh0rtlifepacific north WET · Jul 28, 2023#48
thats a seriously badass lifted yaris..gotta love it!
"A"Brooklyn · Oct 10, 2023#49
Getting ready for my winter sport:
Picture not included in this copy
DavidOmondiToronto · Feb 20, 2024#50
i have 2 problems....rc'cars (dating back to the 80s)and cutting up and modifying cars...especialy full chassis swaps

from pan racers to scale crawlers to crazy nitros...ive got plenty of stuff that could keep up with traffic on the freeway ))