jacobdylanleeOriginal postmd · Sep 21, 2018#1I recently purchased and installed a set of ROTA OS MESH 15x7 +35 with a hub bore of 57.1 .. I was very surprised to find that the front did not successfully clear the rotors, marginally. I had them installed with aftermarket lugs at Mr.Tire, the guy explained they dont like to install after market rims unless purchased from them but i assured him i did my research (here) and they would be fine. They put it in the air unmounted my existing four tires (185/60) and swapped them over to the new wheels, reinstalled, lowered, and went to back off the lift. Low and behold the front caliper dug across the inside of the front wheels, both sides, barely. In a bind with a not so happy pair of employees i went to advance auto parts right across the street and bought cheap, off the rack, non centric wheel spacers, claiming 1/4" thickness, which according to google converts to 6.35 mm. The tech installed them while we both verbally degraded the cheap un-authentic spacers, it did the trick. I drove home and have put approx. 60 miles on the setup to date. Last night when I returned home I check for tightness on my lugs, they moved ever so slightly before clicking in at 80#s. My question for you guys is how much spacer is too much Ive read a thread stating 5mms are okay. Tens are no dice! WHAT ABOUT 6.35? I rub slightly up front now btw, but thats for a different battle...
WHEELS
https://www.amazon.com/PCS-ROTA-MESH...G1W7ZZHTYMZV0J LUG NUTS
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 SPACERS
https://shop.advanceautoparts.com/p/...915/10151822-PReplies 17
jacobdylanleeThread startermd · Sep 21, 2018#2Poor quality pic for reference, Picture not included in this copyPicture not included in this copy
Sent from my Z835 using Tapatalk
RunethecursedSocal · Sep 21, 2018#3generally speaking, the loose lugs are not fault of the spacers but to putting new rims on with lug nuts, you where supposed to check them after driving a bit because they will go loose. after this tightening it should be fine.
ive ran up to a 1.5 inch spacer on jeeps before (thank you spidertrax) and haven't had an issue with loosening spacers. there's fears about your wheelbearings after a certain size. and for the most part. again the general fear of spacers is thread engagement on lugs
jacobdylanleeThread startermd · Sep 21, 2018#4yeah thread engagment has me worried most, i ran 1.25 spacers on my Xj but they had seperated lugs made into them you know..? these cheapos with no studs and stock length studs had me worried so far all is well though
RunethecursedSocal · Sep 21, 2018#5if you got as many threads engagement as big around the stud is youll be fine. if you are overly concerned I would reccommend checking out arp studs. i love em
jacobdylanleeThread startermd · Oct 12, 2018#6Id really like to move these spacers off my front wheels, its giving me a strange stance lol. in order to push the rear out to sit more flush and be past my front wheels i would have to run another pair of spacers. I bought these wheels because after months of research i was assured a 15x7 +35 would fit, i was surprised when no one chimed in once i i mounted my tires to these and try to throw them on. The inside face contacted the caliper just ever so slightly, !'m guessing the construction of the spokes are exceedingly thick and no one foresaw the interference. My question boils down to whether or not grinding a small amount of the caliper would be an option. It seems perfectly viable to me. Any input would be appreciated.
WeeYariGeorgetown, Ontario, Canada · Oct 12, 2018#7It is possible to grind away a small portion of caliper. Another option since they are available, would be to acquire 3mm spacers for the front. Move your current spacers to the back for an even better balanced stance.
Nobody chimed in early on fitment because it is very rare that 15s won't clear the caliper. Very rare.
Sent from my Elite_5_5_Octa using Tapatalk
jacobdylanleeThread startermd · Oct 12, 2018#8i feel like the 6mm spacers in the rear will make it sit pretty flush, i have to do some camber adjustments on both my volvo and yaris so maybe tomorrow i will do some grinding on the caliper and swap the spacers to rear...
Dodge Aries KMachesney Park, IL · Oct 12, 2018#9I had 15x7 wheels on my old 2016. 40 MM offset though. They cleared just fine.
jacobdylanleeThread startermd · Oct 12, 2018#10yeah most due, heck i was running after market 15x6 before hand. Most wheel clearance issues in correlation to the caliper are in 14s and 13s. This particular wheel ( Rota OS mesh) has a very thick spoke construction, i believe its a good thing really, I at least have confidence in the wheel itself lol
jacobdylanleeThread startermd · Oct 12, 2018#11they look good tho!
1 attachment not included in this copy
jacobdylanleeThread startermd · Oct 12, 2018#12going to go lower next spring, thinking megans and 195/50r15s
jacobdylanleeThread startermd · Oct 13, 2018#13Okay! I got the spacers off! I had to grind a small amount off of the brake caliper. Specifically the bracket that holds the outside pad. I reinstalled the fronts 6mm in than previously and am much more satisfied. On to the rear. I wanted to add the spacers to the rear to fill the wheel wells a touch. While I was back there I wanted a little more drop so I removed all the rubber spring isolators from the rear. It worked. I was able to get 3/4 of inch lower it really eliminated my rake. I'm glad I did it. Anyways thanks for all the help here some pics...Picture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copy
Sent from my Z835 using Tapatalk
jacobdylanleeThread startermd · Oct 13, 2018#14New stancePicture not included in this copyPicture not included in this copy
Sent from my Z835 using Tapatalk
kevinj93Sydney, Australia · Oct 13, 2018#15I hope it's a limitation of the camera lens - those wheels look rather oval....
WeeYariGeorgetown, Ontario, Canada · Oct 14, 2018#16 Originally Posted by
kevinj93 ↑ I hope it's a limitation of the camera lens - those wheels look rather oval....
Yeah, I don't know what is up with that second pic. To me they look installed with wicked camber.
Sent from my Elite_5_5_Octa using Tapatalk
jacobdylanleeThread startermd · Oct 14, 2018#17Lol yes. It's because my only camera choice is my phone. 30 dollar pay as you go phone. Not exactly Nikon status. I assure you if my wheels were ovals there be an anti Rota post going on ...
Sent from my Z835 using Tapatalk
jacobdylanleeThread startermd · Oct 14, 2018#18It's also parked with the passenger side off of the shoulder of the road so it's sitting uneven
Sent from my Z835 using Tapatalk