Yarisworld Archive

Bought my first Celica GTS

30 posts · 9,236 views

ArmstrongRacingOriginal postSan Diego · Sep 16, 2018#1
Found this car on Craigslist for super cheap. It has an engine issue I need to figure out and some other small items to attend to. PLEASE subscribe to my channel if you are interested in this because I won’t be posting the updates on here since this is Celica related. Thanks guys!https://youtu.be/fDRIp75_8Ds

Replies 29

saudi_boiSaudi · Sep 16, 2018#2
Congrats buddy!
kimonaHuntington Bch, CA · Sep 16, 2018#3
2000 Toyota Celica GT-S hatchback. Way back when Toyota actually built good looking cars.

1 attachment not included in this copy

RunethecursedSocal · Sep 16, 2018#4
good looking and celica aren't..... the first things that come to mind, that said the celica did offer a certain flare that I think was lost out on most people after 2006. sadly. came with a bitchin 6 speed and rad motor, and i think it was highly regarded by Consumer reports as one of the best cars for new drivers
ArmstrongRacingThread starterSan Diego · Sep 16, 2018#5
Thanks guys.

I totally agree that the GTS and XRS cars were innovative cars for Toyota at the time. SuperStreet did a comparison between the B18C and 2ZZGE back in 01’, of course they chose the Honda engine in the end(they’re fan boys) due to the earlier VTEC point. The 2zz made more power and torque though.

After the 2zz all the Toyota FWD crowd had was the tC, witch wasn’t the same on any level. I’ve always been a fan of the 00’-06’ sports cars, and I’m excited to experience this for the first time.
thebarberGrand Rapids, MI · Sep 17, 2018#6
Originally Posted by ArmstrongRacing ↑
Thanks guys.

I totally agree that the GTS and XRS cars were innovative cars for Toyota at the time. SuperStreet did a comparison between the B18C and 2ZZGE back in 01’, of course they chose the Honda engine in the end(they’re fan boys) due to the earlier VTEC point. The 2zz made more power and torque though.

After the 2zz all the Toyota FWD crowd had was the tC, witch wasn’t the same on any level. I’ve always been a fan of the 00’-06’ sports cars, and I’m excited to experience this for the first time.
what year GTS? 02 is the best year, iirc. high redline, low lift, etc.

find an xrs intake manifold for more power on the cheap...i might have a friend with a few kicking around, now that i think about it.

congrats on the new car...sell the yaris yet?
tmontagueCaledonia Ont. · Sep 17, 2018#7
cool car man, I saw one at the track last week and we had some fun but other than that I rarely ever see any around here - all rusted out by now.

Is your plan to race autox again with this platform or is this just a project car for youtube material?

Whats happening w/ your 2zr Vios?
KalispelArizona (USA) · Sep 17, 2018#8
Shame that cars like this, the Honda Prelude & Acura Integra/RSX went away. 🙁
ArmstrongRacingThread starterSan Diego · Sep 17, 2018#9
Originally Posted by thebarber ↑
what year GTS? 02 is the best year, iirc. high redline, low lift, etc.

find an xrs intake manifold for more power on the cheap...i might have a friend with a few kicking around, now that i think about it.

congrats on the new car...sell the yaris yet?
This is a 2000. How does the XRS intake manifold differ from the GTS?

Originally Posted by tmontague ↑
Is your plan to race autox again with this platform or is this just a project car for youtube material?

Whats happening w/ your 2zr Vios?

No one has made a serious offer on the Yaris, not sure what the fate of that car is yet.

This Celica will be a good run of video and blog content, and in the end I will sell it too.
thebarberGrand Rapids, MI · Sep 18, 2018#10
celica is a 1 piece manifold, the xrs is a 2 piece. its part of the reason the xrs dyno's about 10whp more than the celica.

angle of TB is different, however
CrankyOldManWest Michigan · Sep 18, 2018#11
I've actually got a 2-piece manifold from a 2ZZ Vibe GT in my garage. I can do pics for reference.
atomic_hojiKincardine, ON, Canada · Sep 18, 2018#12
Originally Posted by ArmstrongRacing ↑
...
It has an engine issue I need to figure out..
...
Easily solved: 2ZR swap it.. 😁

Congrats on the fun car! The Celica should be a hoot to play around with.. Looking forward to seeing what you do with it.

-- Adam
ArmstrongRacingThread starterSan Diego · Sep 19, 2018#13
Originally Posted by thebarber ↑
celica is a 1 piece manifold, the xrs is a 2 piece. its part of the reason the xrs dyno's about 10whp more than the celica.

angle of TB is different, however
Interesting.....I’m intrigued. What is the solution for the different throttle angle? XRS or aftermarket intake maybe?

Originally Posted by atomic_hoji ↑
Easily solved: 2ZR swap it.. 😁

Congrats on the fun car! The Celica should be a hoot to play around with.. Looking forward to seeing what you do with it.

-- Adam
Haha, unfortunately that’s not possible due to the bell housing mounts used in the Celica chassis. You have to use the 1zz/2zz C56 or C60 bell housing that have the starter at 10:00 vs the 2zr/1nz at 9:00
thebarberGrand Rapids, MI · Sep 19, 2018#14
Originally Posted by ArmstrongRacing ↑
Interesting.....I’m intrigued. What is the solution for the different throttle angle? XRS or aftermarket intake maybe?
iirc, its an aftermarket intake. might be able to check on newcelica.org
ArmstrongRacingThread starterSan Diego · Sep 19, 2018#15
Originally Posted by thebarber ↑
celica is a 1 piece manifold, the xrs is a 2 piece. its part of the reason the xrs dyno's about 10whp more than the celica.

angle of TB is different, however
After doing a good amount of research on this I’ve found that the difference in power numbers was due to changes in how the power is measured. Everyone on all of the Toyota forums mentions this and how the dyno numbers from all 2zz cars is about the same.
thebarberGrand Rapids, MI · Sep 20, 2018#16
I don’t know, over the years I’ve consistently seeing Celicas dyno about 10 wheel horsepower less with intake headers and exhaust versus matrix and Corolla XRS’s
ern-dizCA all day · Sep 20, 2018#17
To Tom's point, could it be wheel dyno vs. dynojet?
SirDigbyDenver, Colorado · Sep 20, 2018#18
not too bad. how much was it?
ArmstrongRacingThread starterSan Diego · Sep 21, 2018#19
Originally Posted by ern-diz ↑
To Tom's point, could it be wheel dyno vs. dynojet?
I believe that was exactly the issue

Originally Posted by SirDigby ↑
not too bad. how much was it?
Seller had it listed for $600, but I talked him down to $450
kimonaHuntington Bch, CA · Sep 21, 2018#21
^^^ I enjoyed that.
ArmstrongRacingThread starterSan Diego · Sep 22, 2018#22
Great video, that motivates me even more to bring this car back to life! Can’t wait to finally drive one of these...
DarkShadowFoxMassachusetts · Dec 23, 2018#25
put the motor in your yaris and put the corolla motor in your celica :D
atomic_hojiKincardine, ON, Canada · Dec 23, 2018#26
Glad it's worked out to be a salvageable unit with a bit of machine work, bearings, and gaskets. Too bad someone gooped the silicone mess all over it though - that oil screen was awfully sketchy.. and I mean, that's my non-professional opinion.. I imagine as a professional you cry a little each time you run into that sort of work. lol

Looking forward to seeing more work on the Celica! 👍

-- Adam
ArmstrongRacingThread starterSan Diego · Dec 23, 2018#27
Originally Posted by DarkShadowFox ↑
put the motor in your yaris and put the corolla motor in your celica :D
I thought about it, but then I would have 2 non-legal cars. I’m also not interested in making the Yaris less reliable, it’s not like I have disposable income.

When it comes to finding cars with poor workmanship issues, they are easy to come by. Many “mechanics” think they know what they’re doing in professional roles, it’s almost garanteed to be worse when it’s “some guy” at “some shop”.

I may be wrong, or maybe I’m just tired of fixing other people’s mistakes...
LeegamerAshland, VA · Dec 24, 2018#28
Originally Posted by ArmstrongRacing ↑
I thought about it, but then I would have 2 non-legal cars. I’m also not interested in making the Yaris less reliable, it’s not like I have disposable income.

When it comes to finding cars with poor workmanship issues, they are easy to come by. Many “mechanics” think they know what they’re doing in professional roles, it’s almost garanteed to be worse when it’s “some guy” at “some shop”.

I may be wrong, or maybe I’m just tired of fixing other people’s mistakes...
Seems to be the truth. I've had mechanics mis-diagnose several issues on several cars. When I was living in a town house and couldn't really work on my own car I'd take it to shops. It took me quite a while to find one where they were honest, let alone knew what they were talking about.

I took my yaris to a shop to have them check the water pump a few years ago and they told me the whirring sound I was hearing was a squeaky clutch pedal. lol
06YarisRSFredericton, New Brunswick, Canada · Dec 24, 2018#29
Originally Posted by ArmstrongRacing ↑
Update #2 on the Celica!
https://youtu.be/FAvMkHX3F0g
👍 Enjoyed this video. Will be following the whole rebuild process.
tmontagueCaledonia Ont. · Dec 24, 2018#30
Originally Posted by 06YarisRS ↑
👍 Enjoyed this video. Will be following the whole rebuild process.
I second this